3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC18F26K40T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC18F26K40T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{MCLR}/VPP/RE3 | input | Input-only port pin RE3 with weak pull-up and IOCE3 interrupt-on-change, also the MCLR reset / VPP programming voltage input. |
| 2 | RA0 | bidirectional | PORTA bit 0 with analog input ANA0, comparator inputs C1IN0-/C2IN0-, IOCA0 interrupt-on-change and weak pull-up. |
| 3 | RA1 | bidirectional | PORTA bit 1 with analog input ANA1, comparator inputs C1IN1-/C2IN1-, IOCA1 interrupt-on-change and weak pull-up. |
| 4 | RA2 | bidirectional | PORTA bit 2 with analog input ANA2, DAC1OUT1 output, Vref- (DAC/ADC), comparator inputs C1IN0+/C2IN0+ and IOCA2 interrupt-on-change. |
| 5 | RA3 | bidirectional | PORTA bit 3 with analog input ANA3, Vref+ (DAC/ADC), comparator input C1IN1+, MDCARL (DSM carrier low) and IOCA3 interrupt-on-change. |
| 6 | RA4 | bidirectional | PORTA bit 4 with analog input ANA4, T0CKI timer 0 clock input, MDCARH (DSM carrier high) and IOCA4 interrupt-on-change. |
| 7 | RA5 | bidirectional | PORTA bit 5 with analog input ANA5, MDSRC (DSM source), SS1 MSSP slave select and IOCA5 interrupt-on-change. |
| 8 | VSS | power_in | Ground reference pin, must always be connected. |
| 9 | CLKIN/OSC1/RA7 | bidirectional | PORTA bit 7 with analog input ANA7, also OSC1 oscillator input / CLKIN external clock input and IOCA7 interrupt-on-change. |
| 10 | CLKOUT/OSC2/RA6 | bidirectional | PORTA bit 6 with analog input ANA6, also OSC2 oscillator output / CLKOUT and IOCA6 interrupt-on-change. |
| 11 | SOSCO/RC0 | bidirectional | PORTC bit 0 with analog input ANC0, secondary oscillator output SOSCO, T1CKI/T3CKI/T3G timer inputs and IOCC0 interrupt-on-change. |
| 12 | SOSCI/RC1 | bidirectional | PORTC bit 1 with analog input ANC1, secondary oscillator input SOSCIN/SOSCI, CCP2 input and IOCC1 interrupt-on-change. |
| 13 | RC2 | bidirectional | PORTC bit 2 with analog input ANC2, T5CKI timer clock input, CCP1 input and IOCC2 interrupt-on-change. |
| 14 | RC3 | bidirectional | PORTC bit 3 with analog input ANC3, T2IN timer input, MSSP1 SCK1/SCL1 (I2C logic levels) and IOCC3 interrupt-on-change. |
| 15 | RC4 | bidirectional | PORTC bit 4 with analog input ANC4, MSSP1 SDI1/SDA1 (I2C logic levels) and IOCC4 interrupt-on-change. |
| 16 | RC5 | bidirectional | PORTC bit 5 with analog input ANC5, T4IN timer input and IOCC5 interrupt-on-change. |
| 17 | RC6 | bidirectional | PORTC bit 6 with analog input ANC6, EUSART1 CK1 clock (bidirectional) and IOCC6 interrupt-on-change. |
| 18 | RC7 | bidirectional | PORTC bit 7 with analog input ANC7, EUSART1 RX1/DT1 (bidirectional) and IOCC7 interrupt-on-change. |
| 19 | VSS | power_in | Ground reference pin, must always be connected. |
| 20 | VDD | power_in | Positive supply pin (2.3V to 5.5V for PIC18F26K40), must always be connected. |
| 21 | RB0 | bidirectional | PORTB bit 0 with analog input ANB0, comparator input C2IN1+, CWG1 input, ZCDIN zero-cross detect input, INT0 and IOCB0 interrupt-on-change. |
| 22 | RB1 | bidirectional | PORTB bit 1 with analog input ANB1, comparator inputs C1IN3-/C2IN3-, INT1 and IOCB1 interrupt-on-change. |
| 23 | RB2 | bidirectional | PORTB bit 2 with analog input ANB2, INT2 and IOCB2 interrupt-on-change. |
| 24 | RB3 | bidirectional | PORTB bit 3 with analog input ANB3, comparator inputs C1IN2-/C2IN2- and IOCB3 interrupt-on-change. |
| 25 | RB4 | bidirectional | PORTB bit 4 with analog input ANB4, T5G timer gate input and IOCB4 interrupt-on-change. |
| 26 | RB5 | bidirectional | PORTB bit 5 with analog input ANB5, T1G timer gate input and IOCB5 interrupt-on-change. |
| 27 | RB6/ICSPCLK | bidirectional | PORTB bit 6 with analog input ANB6, also ICSPCLK in-circuit serial programming clock and IOCB6 interrupt-on-change. |
| 28 | RB7/ICSPDAT | bidirectional | PORTB bit 7 with analog input ANB7, DAC1OUT2 output, T6IN timer input, also ICSPDAT in-circuit serial programming data and IOCB7 interrupt-on-change. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 668 | |||
| Storage temperature | -65 | 150 | °C | 668 | |||
| Voltage on VDD pin (PIC18F) | VDD | -0.3 | 6.5 | V | with respect to VSS | 668 | |
| Voltage on MCLR pin | MCLR | -0.3 | 9 | V | with respect to VSS | 668 | |
| Voltage on all other pins | -0.3 | V | with respect to VSS; printed maximum is VDD + 0.3V | 668 | |||
| Maximum current on VSS pin | 350 | mA | -40°C ≤ TA ≤ +85°C | 668 | |||
| Maximum current on VSS pin | 120 | mA | 85°C < TA ≤ +125°C | 668 | |||
| Maximum current on VDD pin, 28-pin devices | 250 | mA | -40°C ≤ TA ≤ +85°C | 668 | |||
| Maximum current on VDD pin, 28-pin devices | 85 | mA | 85°C < TA ≤ +125°C | 668 | |||
| Maximum current on any standard I/O pin | -50 | 50 | mA | 668 | |||
| Clamp current | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 668 | |
| Total power dissipation | 800 | mW | 668 | ||||
| VDD operating supply voltage | VDD | 2.3 | V | FOSC ≤ 16 MHz (PIC18F) | 669 | ||
| VDD operating supply voltage | VDD | 2.5 | V | FOSC > 16 MHz (PIC18F) | 669 | ||
| VDD operating supply voltage | VDD | 3 | V | FOSC > 32 MHz (PIC18F) | 669 | ||
| VDD maximum operating supply voltage | VDDMAX | 5.5 | V | PIC18F26/45/46K40 | 669 | ||
| Industrial operating ambient temperature | TA_MIN | -40 | °C | Industrial temperature | 669 | ||
| Industrial operating ambient temperature | TA_MAX | 85 | °C | Industrial temperature | 669 | ||
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 671 | ||
| Supply current, XT oscillator | IDDXT4 | 550 | 750 | μA | XT = 4 MHz, 3.0V | 673 | |
| Supply current, HFINTOSC | IDDHFO16 | 2 | 2.7 | mA | HFINTOSC = 16 MHz, 3.0V | 673 | |
| Supply current, HFINTOSC PLL | IDDHFOPLL | 7.5 | 9.5 | mA | HFINTOSC = 64 MHz, 3.0V | 673 | |
| Supply current, HS+PLL | IDDHSPLL64 | 7 | 9 | mA | HS+PLL = 64 MHz, 3.0V | 673 | |
| Power-down current, IPD base | IPD | 0.4 | 4 | μA | VREGPM = 1, 3.0V, max at +85°C | 674 | |
| Power-down current, IPD base | IPD | 0.4 | 12 | μA | VREGPM = 1, 3.0V, max at +125°C | 674 | |
| Power-down current, low-frequency oscillator/WDT | IPD_WDT | 0.6 | 5 | μA | VREGPM = 1, 3.0V, max at +85°C | 674 | |
| Power-down current, low-frequency oscillator/WDT | IPD_WDT | 0.6 | 13 | μA | VREGPM = 1, 3.0V, max at +125°C | 674 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 14 | 19 | μA | VREGPM = 1, 3.0V, max at +85°C | 674 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 14 | 21 | μA | VREGPM = 1, 3.0V, max at +125°C | 674 | |
| Power-down current, FVR | IPD_FVR | 32 | 53 | μA | VREGPM = 1, 3.0V, FVRCON = 0x81 or 0x84, max at +85°C | 674 | |
| Power-down current, FVR | IPD_FVR | 32 | 62 | μA | VREGPM = 1, 3.0V, FVRCON = 0x81 or 0x84, max at +125°C | 674 | |
| Input low voltage, I/O port with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 675 | ||
| Input high voltage, I/O port with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 676 | ||
| Input leakage current, I/O ports (85°C) | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 676 |
| Input leakage current, I/O ports (125°C) | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C | 676 |
| Weak pull-up current | IPUR | 25 | 120 | 200 | μA | VDD = 3.0V, VPIN = VSS | 676 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 676 | ||
| Pin capacitance, all I/O pins | CIO | 5 | 50 | pF | 676 | ||
| Byte erase and write cycle time | TD_BEW | 4 | 5 | ms | 676 | ||
| Self-timed row erase or self-timed write time | TP_REW | 2 | 2.5 | ms | 677 | ||
| System clock frequency | FOSC | 64 | MHz | Notes 2, 3 | 679 | ||
| HS oscillator clock frequency | FHS | 20 | MHz | VDD > 2.5V, Note 4 | 679 | ||
| XT oscillator clock frequency | FXT | 4 | MHz | Note 4 | 679 | ||
| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 679 |
| PLL input frequency range | FPLLIN | 4 | 16 | MHz | 680 | ||
| PLL output frequency range | FPLLOUT | 16 | 64 | MHz | Note 1 | 680 | |
| CLKOUT rising edge delay | TCLKOUTH | 70 | ns | 681 | |||
| CLKOUT falling edge delay | TCLKOUTL | 72 | ns | 681 | |||
| Port input setup time | TIO_SETUP | 20 | ns | 681 | |||
| Port input hold time | TIO_HOLD | 50 | ns | 681 | |||
| Brown-out Reset voltage trip point | VBOR | 2.7 | 2.85 | 3 | V | BORV = 00 | 683 |
| Brown-out Reset voltage trip point | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 01 | 683 |
| Brown-out Reset voltage trip point | VBOR | 2.3 | 2.45 | 2.6 | V | BORV = 10 | 683 |
| Thermal resistance junction to ambient, 28-pin SSOP | θJA | 90 | °C/W | 28-pin SSOP package | 677 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 677 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 296 |
CAD (KiCad official)
- Symbol:
PIC18F26K40T-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18f26k40t-i-ss-etched.step/pic18f26k40t-i-ss-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f26k40t-i-ss.step/pic18f26k40t-i-ss.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (755 pp, sha256
e86a60cc739f0fa4, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).