Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NDP6802SF-33

NDP · Linear Voltage Regulators (LDO) · SOT-89-3L

NDP6802SF-33 from NDP, in a SOT-89-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input; VIN to GND is rated -0.3 to 95 V, the recommended input range is VOUT+2 to 72 V, and the datasheet notes transient input must not exceed 85 V when using solid or ceramic input capacitors.
2 GND power_in Ground reference for the regulator; VIN and VOUT ratings are specified to GND.
3 VOUT power_out Regulated output rated -0.3 to 15 V to GND, with recommended output current of 0 to 80 mA and a minimum 1 µF output capacitor.

Key specifications

Parameter Value
Manufacturer NDP
Package SOT-89-3L
Category Power Management
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 72 V Recommended operating range; minimum printed as VOUT+2 3
Output Current IOUT 0 80 mA 3
Input Cap CIN 1 μF 3
Output Cap COUT 1 μF 3
VIN to GND -0.3 95 V Absolute maximum rating at TA=25°C 3
VOUT to GND -0.3 15 V Absolute maximum rating at TA=25°C 3
EN, PG to GND -0.3 7 V Absolute maximum rating at TA=25°C 3
Power Dissipation PD 1000 mW Absolute maximum rating at TA=25°C 3
Operating Junction Temperature TA -40 150 °C Absolute maximum rating 3
Storage Junction Temperature Tstg -65 150 °C Absolute maximum rating 3
Thermal Resistance from Junction to Case θJC 14.6 °C/W 3
Thermal Resistance from Junction to Ambient θJA 44 °C/W 3
Input Voltage VIN 4 85 V 4
UVLO OFF Voltage VUVLO_OFF 3.65 3.8 3.95 V VIN Rising 4
UVLO ON Voltage VUVLO_ON 3.3 3.4 3.5 V VIN Falling 4
Output Voltage 33 Device VOUT 3.234 3.3 3.366 V IOUT =5mA 4
Quiescent Current ICCQ 3 5 μA No Load 4
Shutdown Current ISD 1.1 1.5 μA VEN=0V 4
Power Supply Rejection Ratio PSRR 60 dB IOUT=15mA, COUT=10uF, f=100Hz 4
Maximum Output Current IMAX 100 mA VIN=24V 4
Current Limit ILIMIT 120 mA 4
Short Circuit Current ISHORT 120 mA VOUT =0V 4
Dropout Voltage 33 Device VDROP 550 mV IOUT =50mA 4
Enable Internal Pull Up Voltage VEN 3.5 V 4
Enable ON Voltage VEN_H 1 V VEN Rising 4
Enable OFF Voltage VEN_L 0.3 V VEN Falling 4
PG Output Low Voltage VPG_L 30 mV IPG=5mA 4
PG Pull Down OFF Voltage 33 Device VOUT_PGH 2.8 V VOUT Droping 4
Thermal Shutdown Temperature TSD 150 °C 4
Thermal Shutdown Hysteresis Temperature TSH 30 °C 4

CAD (KiCad official)

  • Symbol: NDP6802SF-33
  • Footprint: Package_TO_SOT_SMD:SOT-89-3
  • 3D model: SOT-89-3L (KiCad packages3D, STEP)
  • 3D model files: ndp6802sf-33-etched.step / ndp6802sf-33-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ndp6802sf-33.step / ndp6802sf-33.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NDP datasheet (13 pp, sha256 c2524f42747e8e54, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF