component
OP97FSZ-REEL7
Public Made by Adomby adom
Analog Devices Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOP97FSZ-REEL7
Analog Devices · Operational Amplifier · SOIC-8
OP97FSZ-REEL7 from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NULL | passive | Offset null pin; a potentiometer between 5 kΩ and 100 kΩ is connected between Pin 1 and Pin 8 with the wiper to the positive supply for optional offset nulling. |
| 2 | -IN | input | Inverting input; if differential input voltages above ±1 V are expected, series resistors must limit the current to a maximum of 10 mA. |
| 3 | +IN | input | Non-inverting input; common-mode voltages are not restricted and may vary over the full range of the supply voltages used. |
| 4 | V- | power_in | Negative supply pin; the specified supply operating range is ±2 V to ±20 V. |
| 5 | OVERCOMP | passive | Overcompensation pin, used to increase the phase margin or decrease gain bandwidth product at gains greater than 10. |
| 6 | OUT | output | Output; typically swings to within 1 V of the rails with a 10 kΩ load, and the output short-circuit duration is indefinite. |
| 7 | V+ | power_in | Positive supply pin; also the connection point for the wiper of the optional offset null potentiometer. |
| 8 | NULL | passive | Offset null pin; the other end of the 5 kΩ to 100 kΩ null potentiometer connected between Pin 1 and Pin 8. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 30 | 75 | μV | 3 | ||
| Input Offset Current | IOS | 30 | 150 | pA | 3 | ||
| Input Bias Current | IB | 30 | 150 | pA | 3 | ||
| Input Noise Voltage Density | en | 17 | 30 | nV/√Hz | fO = 10 Hz | 3 | |
| Input Noise Voltage Density | en | 14 | 22 | nV/√Hz | fO = 1000 Hz | 3 | |
| Large Signal Voltage Gain | AVO | 200 | 2000 | V/mV | VO = ±10 V; RL = 2 kΩ | 3 | |
| Common-Mode Rejection | CMR | 110 | 132 | dB | VCM = ±13.5 V | 3 | |
| Input Voltage Range | IVR | -13.5 | 14 | V | 3 | ||
| Output Voltage Swing | VO | -13 | 14 | V | RL = 10 kΩ | 3 | |
| Power Supply Rejection | PSR | 110 | 132 | dB | VS = ±2 V to ±20 V | 3 | |
| Supply Current | ISY | 380 | 600 | μA | 3 | ||
| Supply Voltage | VS | 2 | 15 | 20 | V | Operating range | 3 |
| Slew Rate | SR | 0.1 | 0.2 | V/μs | 3 | ||
| Closed-Loop Bandwidth | BW | 0.4 | 0.9 | MHz | AVCL = 1 | 3 | |
| Input Offset Voltage | VOS | 60 | 200 | μV | 4 | ||
| Average Temperature Coefficient of VOS | TCVOS | 0.3 | 2 | μV/°C | S suffix | 4 | |
| Input Offset Current | IOS | 80 | 750 | pA | 4 | ||
| Average Temperature Coefficient of IOS | TCIOS | 0.6 | 7.5 | pA/°C | 4 | ||
| Input Bias Current | IB | 80 | 750 | pA | 4 | ||
| Large Signal Voltage Gain | AVO | 150 | 1000 | V/mV | VO = 10 V; RL = 2 kΩ | 4 | |
| Common-Mode Rejection | CMR | 108 | 128 | dB | VCM = ±13.5 V | 4 | |
| Power Supply Rejection | PSR | 108 | 128 | dB | VS = ±2.5 V to ±20 V | 4 | |
| Input Voltage Range | IVR | -13.5 | 14 | V | 4 | ||
| Output Voltage Swing | VO | -13 | 14 | V | RL = 10 kΩ | 4 | |
| Slew Rate | SR | 0.05 | 0.15 | V/μs | 4 | ||
| Supply Current | ISY | 400 | 800 | μA | 4 | ||
| Supply Voltage | VS | 2.5 | 15 | 20 | V | Operating range | 4 |
| Supply Voltage | 20 | V | 5 | ||||
| Input Voltage | 20 | V | 5 | ||||
| Differential Input Voltage | 1 | V | 5 | ||||
| Differential Input Current | 10 | mA | 5 | ||||
| Operating Temperature Range | -40 | 85 | °C | OP97E, OP97F (P, S) | 5 | ||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Junction Temperature Range | -65 | 150 | °C | 5 | |||
| Lead Temperature | 300 | °C | Soldering, 60 sec | 5 | |||
| Thermal Resistance, junction-to-ambient | θJA | 158 | °C/W | 8-Lead SOIC (S suffix), device soldered to PCB | 5 | ||
| Thermal Resistance, junction-to-case | θJC | 43 | °C/W | 8-Lead SOIC (S suffix) | 5 |
CAD (KiCad official)
- Symbol:
OP97FSZ-REEL7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
op97fsz-reel7-etched.step/op97fsz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);op97fsz-reel7.step/op97fsz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
96bef042028068b4, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).