component
PS9124-F3-AX
Public Made by Adomby adom
RENESAS Logic Output Optocoupler, SO-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPS9124-F3-AX
RENESAS · Logic Output Optocoupler · SO-5
PS9124-F3-AX from RENESAS, in a SO-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | input | LED anode; forward current is 3.8 to 7.5 mA recommended (6.0 mA typ.) and 25 mA absolute maximum. |
| 2 | Cathode | input | LED cathode; reverse voltage between the LED terminals must not exceed 5 V absolute maximum. |
| 3 | GND | power_in | Detector ground; place a bypass capacitor of at least 0.1 µF between VCC and GND within 10 mm of the leads. |
| 4 | VO | output | Open-collector output that goes low when the LED is on and high when it is off; it needs a pull-up resistor of 330 Ω to 4 kΩ, is rated 7 V maximum and sinks 25 mA maximum. |
| 5 | VCC | power_in | Detector supply, recommended 2.7 to 3.6 V or 4.5 to 5.5 V, with 7 V absolute maximum. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SO-5 |
| Category | Optocoupler |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Diode Forward Voltage | VF | 1.3 | 1.55 | 1.8 | V | IF = 10 mA, TA = 25C | 6 |
| Reverse Current | IR | 10 | A | VR = 3 V, TA = 25C | 6 | ||
| High Level Output Current (3.3 V) | IOH | 1 | 80 | A | VCC = VO = 3.3 V, VF = 0.8 V | 6 | |
| High Level Output Current (5.5 V) | IOH | 1 | 100 | A | VCC = VO = 5.5 V, VF = 0.8 V | 6 | |
| Low Level Output Voltage | VOL | 0.2 | 0.6 | V | VCC = 3.3 V, IF = 4.5 mA, IOL = 13 mA | 6 | |
| High Level Supply Current | ICCH | 4 | 7 | mA | VCC = 3.3 V, IF = 0 mA, VO = open | 6 | |
| Low Level Supply Current (3.3 V) | ICCL | 6 | 10 | mA | VCC = 3.3 V, IF = 4.5 mA, VO = open | 6 | |
| Low Level Supply Current (5.5 V) | ICCL | 7 | 10 | mA | VCC = 5.5 V, IF = 4.5 mA, VO = open | 6 | |
| Coupled Threshold Input Current (H-L) | IFHL | 1 | 3 | mA | VCC = 3.3 V, RL = 350, VO = 0.8 V | 6 | |
| Propagation Delay Time tPHL (25C, 3.3 V) | tPHL | 40 | 75 | ns | TA = 25C, VCC = 3.3 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | |
| Propagation Delay Time tPHL (full temp, 3.3 V) | tPHL | 100 | ns | VCC = 3.3 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | ||
| Propagation Delay Time tPHL (25C, 5 V) | tPHL | 40 | 75 | ns | TA = 25C, VCC = 5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | |
| Propagation Delay Time tPHL (full temp, 5 V) | tPHL | 100 | ns | VCC = 5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | ||
| Propagation Delay Time tPLH (25C, 3.3 V) | tPLH | 50 | 75 | ns | TA = 25C, VCC = 3.3 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | |
| Propagation Delay Time tPLH (full temp, 3.3 V) | tPLH | 100 | ns | VCC = 3.3 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | ||
| Propagation Delay Time tPLH (25C, 5 V) | tPLH | 45 | 75 | ns | TA = 25C, VCC = 5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | |
| Propagation Delay Time tPLH (full temp, 5 V) | tPLH | 100 | ns | VCC = 5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | ||
| Pulse Width Distortion | tPHL-tPLH | 5 | 35 | ns | VCC = 3.3/5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | |
| Propagation Delay Skew | tpsk | 40 | ns | VCC = 3.3/5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | ||
| CM Transient Immunity at High Level Output | CMH | 10 | 15 | kV/s | VCC = 3.3/5 V, TA = 25C, IF = 0 mA, VO > 2 V, RL = 350, VCM = 1 kV | 6 | |
| CM Transient Immunity at Low Level Output | CML | 10 | 15 | kV/s | VCC = 3.3/5 V, TA = 25C, IF = 4.5 mA, VO < 0.8 V, RL = 350, VCM = 1 kV | 6 | |
| Terminal Capacitance | Ct | 30 | pF | f = 1 MHz, VF = 0 V, TA = 25C | 6 | ||
| Isolation Capacitance | CI-O | 0.6 | pF | V = 0 V, f = 1 MHz, TA = 25C | 6 | ||
| Rise Time | tr | 20 | ns | VCC = 3.3/5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | ||
| Fall Time | tf | 5 | ns | VCC = 3.3/5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 | ||
| Diode Forward Current | IF | 25 | mA | TA = 25C | 5 | ||
| Reverse Voltage | VR | 5 | V | TA = 25C | 5 | ||
| Detector Supply Voltage | VCC | 7 | V | TA = 25C | 5 | ||
| Output Voltage | VO | 7 | V | TA = 25C | 5 | ||
| Output Current | IO | 25 | mA | TA = 25C | 5 | ||
| Power Dissipation | PC | 200 | mW | TA = 25C | 5 | ||
| Isolation Voltage | BV | 3750 | Vr.m.s. | AC 1 minute, TA = 25C, RH = 60%, input-output, pins 1-2 shorted, 3-5 shorted | 5 | ||
| Operating Ambient Temperature | TA | -40 | 110 | C | 5 | ||
| Storage Temperature | Tstg | -55 | 125 | C | 5 | ||
| Low Level Input Voltage | VFL | 0.8 | V | 5 | |||
| High Level Input Current | IFH | 3.8 | 6 | 7.5 | mA | 5 | |
| Supply Voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | 5 | |
| Supply Voltage (5 V) | VCC | 4.5 | 5 | 5.5 | V | 5 |
CAD (KiCad official)
- Symbol:
PS9124-F3-AX - Footprint:
Package_SO:SO-6L_10x3.84mm_P1.27mm - 3D model: SO-5 (KiCad packages3D, STEP)
- 3D model files:
ps9124-f3-ax-etched.step/ps9124-f3-ax-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ps9124-f3-ax.step/ps9124-f3-ax.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (17 pp, sha256
9024fba181d090a0, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).