component
NCL30188BDR2G
Public Made by Adomby adom
onsemi LED Drivers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownNCL30188BDR2G
onsemi · LED Drivers · SOIC-8
NCL30188BDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ZCD | input | Zero Crossing Detection. Connected to the auxiliary winding, this pin detects the core reset event for quasi-resonant operation. |
| 2 | VS | input | Input Voltage Sensing. Observes the input voltage rail for brown-out protection, power factor correction, and valley lockout. Recommended range -0.3 V to +4.0 V (optimal ~1.5 V). |
| 3 | COMP | passive | Filtering Capacitor for power factor correction. Typical capacitor values range from 1 to 4.70 uF. |
| 4 | SD | input | Thermal Foldback and Shutdown. Connect an NTC to program thermal current foldback threshold and slope. A Zener diode can also pull the pin up to stop the controller for adjustable OVP protection. |
| 5 | CS | input | Current Sense. Monitors the primary peak current. Internal current limit threshold V_ILIM = 1.00 V (typ), with 300 ns leading-edge blanking. |
| 6 | GND | power_in | Controller ground pin. Reference for all internal circuitry. |
| 7 | DRV | output | Driver Output to an external MOSFET. Totem-pole driver rated 300 mA / 500 mA with 12 V gate clamp. Max continuous voltage -0.3 to V_DRV(high); max current -300/+500 mA. |
| 8 | VCC | power_in | IC Supply Pin (positive supply). Startup threshold V_CC(on) = 18 V typ; turn-off V_CC(off) = 8.8 V typ. Post-startup operating range 9.4 V to 25.5 V (V_CC(OVP) min). Absolute max 30 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | LED-drv |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
NCL30188BDR2G
CAD (KiCad official)
- Symbol:
NCL30188BDR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (26 pp, sha256
00bbb60e7bb22ad5, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).