component
BQ296100DSGR
Public Made by Adomby adom
Texas Instruments Battery Management, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBQ296100DSGR
Texas Instruments · Battery Management · WSON-8-EP(2x2)
BQ296100DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input with operating voltage range 3V to 20V; minimum 4V required for REG output enable. |
| 2 | V4 | input | Fourth cell voltage detection input (V4-V3 measurement) with input range 0V to 5V; requires 1kΩ series resistor and 0.1µF shunt capacitor filter per design requirements. |
| 3 | V3 | input | Third cell voltage detection input (V3-V2 measurement) with input range 0V to 5V; requires 1kΩ series resistor and 0.1µF shunt capacitor filter per design requirements. |
| 4 | V2 | input | Second cell voltage detection input (V2-V1 measurement) with input range 0V to 5V; requires 1kΩ series resistor and 0.1µF shunt capacitor filter per design requirements. |
| 5 | V1 | input | First cell voltage detection input (V1-VSS measurement) with input range 0V to 5V; requires 1kΩ series resistor and 0.1µF shunt capacitor filter per design requirements. |
| 6 | VSS | power_in | Ground reference; electrical connection to IC ground and battery pack negative terminal; must be connected first during cell connection to prevent damage to REG pin. |
| 7 | REG | output | Regulated power output programmed to 3.3V (±3.6% accuracy) with maximum 2mA output current and requiring external 0.47µF to 1µF ceramic capacitor to VSS for stability. |
| 8 | OUT | output | Overvoltage fault signal output with CMOS high-active configuration producing 6V to 8V output voltage when cell voltage exceeds 4.35V threshold; maximum output pull current 4.5mA. |
| 9 | PWPD | passive | Exposed thermal pad; must be soldered to PCB ground plane connection for thermal and mechanical performance of the 2x2mm WSON package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
BQ296100DSGR - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
bq296100dsgr-etched.step/bq296100dsgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bq296100dsgr.step/bq296100dsgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
e6a927461563434f, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).