3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3241ECAI+T
Analog Devices Inc./Maxim Integrated · RS232 ICs · SSOP-28
MAX3241ECAI+T from Analog Devices Inc./Maxim Integrated, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor. |
| 2 | C2- | passive | Negative terminal of the inverting charge-pump capacitor. |
| 3 | V- | power_out | -5.5V generated by the charge pump. |
| 4 | R1IN | input | RS-232 receiver 1 input, ESD protected to ±15kV. |
| 5 | R2IN | input | RS-232 receiver 2 input, ESD protected to ±15kV. |
| 6 | R3IN | input | RS-232 receiver 3 input, ESD protected to ±15kV. |
| 7 | R4IN | input | RS-232 receiver 4 input, ESD protected to ±15kV. |
| 8 | R5IN | input | RS-232 receiver 5 input, ESD protected to ±15kV. |
| 9 | T1OUT | output | RS-232 transmitter 1 output, high-impedance in shutdown. |
| 10 | T2OUT | output | RS-232 transmitter 2 output, high-impedance in shutdown. |
| 11 | T3OUT | output | RS-232 transmitter 3 output, high-impedance in shutdown. |
| 12 | T3IN | input | TTL/CMOS transmitter 3 input. |
| 13 | T2IN | input | TTL/CMOS transmitter 2 input. |
| 14 | T1IN | input | TTL/CMOS transmitter 1 input. |
| 15 | R5OUT | tri_state | TTL/CMOS receiver 5 output, high-impedance when EN is high. |
| 16 | R4OUT | tri_state | TTL/CMOS receiver 4 output, high-impedance when EN is high. |
| 17 | R3OUT | tri_state | TTL/CMOS receiver 3 output, high-impedance when EN is high. |
| 18 | R2OUT | tri_state | TTL/CMOS receiver 2 output, high-impedance when EN is high. |
| 19 | R1OUT | tri_state | TTL/CMOS receiver 1 output, high-impedance when EN is high. |
| 20 | R2OUTB | output | Noninverting complementary receiver 2 output, always active. |
| 21 | R1OUTB | output | Noninverting complementary receiver 1 output, always active. |
| 22 | SHDN | input | Shutdown control, active low. |
| 23 | EN | input | Receiver enable, active low. |
| 24 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor. |
| 25 | GND | power_in | Ground. |
| 26 | VCC | power_in | +3.0V to +5.5V supply voltage. |
| 27 | V+ | power_out | +5.5V generated by the charge pump. |
| 28 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SSOP-28 |
| Category | Communication Interface Chip |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current | ICC | 0.3 | 1 | mA | SHDN = VCC, no load; VCC = +3.3V or +5V, TA = +25°C | 2 | |
| Shutdown Supply Current | 1 | 10 | µA | SHDN = GND | 2 | ||
| Input Logic Low | 0.8 | V | T_IN, EN, SHDN | 2 | |||
| Input Logic High (VCC = +3.3V) | 2 | V | T_IN, EN, SHDN; VCC = +3.3V | 2 | |||
| Input Logic High (VCC = +5.0V) | 2.4 | V | T_IN, EN, SHDN; VCC = +5.0V | 2 | |||
| Input Leakage Current | -1 | 0.01 | 1 | µA | T_IN, EN, SHDN; printed ±0.01 typ, ±1 max | 2 | |
| Transmitter Input Hysteresis | 0.5 | V | 2 | ||||
| Receiver Output Leakage Current | -10 | 0.05 | 10 | µA | R_OUT, EN = VCC, receivers disabled; printed ±0.05 typ, ±10 max | 3 | |
| Receiver Output-Voltage Low | 0.4 | V | IOUT = 1.6mA | 3 | |||
| Receiver Input Voltage Range | -25 | 25 | V | 3 | |||
| Receiver Input Threshold Low (VCC = +3.3V) | 0.6 | 1.1 | V | TA = +25°C, VCC = +3.3V | 3 | ||
| Receiver Input Threshold Low (VCC = +5.0V) | 0.8 | 1.5 | V | TA = +25°C, VCC = +5.0V | 3 | ||
| Receiver Input Threshold High (VCC = +3.3V) | 1.5 | 2.4 | V | TA = +25°C, VCC = +3.3V | 3 | ||
| Receiver Input Threshold High (VCC = +5.0V) | 2 | 2.4 | V | TA = +25°C, VCC = +5.0V | 3 | ||
| Receiver Input Hysteresis | 0.5 | V | 3 | ||||
| Receiver Input Resistance | 3 | 5 | 7 | kΩ | TA = +25°C | 3 | |
| Transmitter Output Voltage Swing | 5 | 5.4 | V | All transmitter outputs loaded with 3kΩ to ground; printed ±5 min, ±5.4 typ | 3 | ||
| Transmitter Output Resistance | 300 | Ω | VCC = 0V, transmitter output = ±2V | 3 | |||
| Transmitter Output Leakage Current | -25 | 25 | µA | VCC = 0V or +3.0V to +5.5V, VOUT = ±12V, transmitters disabled | 3 | ||
| Transmitter Output Short-Circuit Current | 60 | mA | printed ±60 | 3 | |||
| Mouse Drivability Transmitter Output Voltage | 5 | V | T1IN = T2IN = GND, T3IN = VCC, T3OUT loaded with 3kΩ to GND, T1OUT and T2OUT loaded with 2.5mA each; printed ±5 | 3 | |||
| ESD Protection, Human Body Model | 15 | kV | R_IN, T_OUT; printed ±15 | 3 | |||
| ESD Protection, IEC 1000-4-2 Air-Gap | 15 | kV | R_IN, T_OUT; printed ±15 | 3 | |||
| ESD Protection, IEC 1000-4-2 Contact | 8 | kV | R_IN, T_OUT; printed ±8 | 3 | |||
| Maximum Data Rate | 250 | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching, TA = TMIN to TMAX | 4 | |||
| Receiver Propagation Delay tPHL | tPHL | 0.15 | µs | Receiver input to receiver output, CL = 150pF | 4 | ||
| Receiver Propagation Delay tPLH | tPLH | 0.15 | µs | Receiver input to receiver output, CL = 150pF | 4 | ||
| Receiver Output Enable Time | 200 | ns | Normal operation | 4 | |||
| Receiver Output Disable Time | 200 | ns | Normal operation | 4 | |||
| Transmitter Skew | 100 | ns | /tPHL - tPLH/ | 4 | |||
| Receiver Skew | 50 | ns | /tPHL - tPLH/ | 4 | |||
| Transition-Region Slew Rate | 6 | 30 | V/µs | VCC = +3.3V, TA = +25°C, RL = 3kΩ to 7kΩ, +3.0V to -3.0V or -3.0V to +3.0V, one transmitter switching, CL = 150pF to 1000pF | 4 | ||
| VCC to GND | VCC | -0.3 | 6 | V | 2 | ||
| V+ to GND | V+ | -0.3 | 7 | V | Note 1 | 2 | |
| V- to GND | V- | -7 | 0.3 | V | Note 1 | 2 | |
| V+ + /V-/ | 13 | V | Note 1 | 2 | |||
| Input Voltage T_IN, EN, SHDN to GND | -0.3 | 6 | V | 2 | |||
| R_IN to GND | -25 | 25 | V | 2 | |||
| T_OUT to GND | -13.2 | 13.2 | V | 2 | |||
| Operating Temperature Range (MAX32__EC__) | 0 | 70 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (soldering, 10s) | 300 | °C | 2 | ||||
| Soldering Temperature (reflow) | 260 | °C | 2 | ||||
| Supply Voltage Range | VCC | 3 | 5.5 | V | Electrical characteristics test condition, C1-C4 = 0.1μF | 3 |
CAD (KiCad official)
- Symbol:
MAX3241ECAI+T - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files:
max3241ecai-t-etched.step/max3241ecai-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3241ecai-t.step/max3241ecai-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (22 pp, sha256
773dd6aa67273c10, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).