component

SSP8011AM

Public Unreviewed

by Ray

Shanghai Siproin Microelectronics Touch Sensors, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentsensorssp8011am
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

SSP8011AM

Shanghai Siproin Microelectronics · Touch Sensors · SOT-23-6

SSP8011AM from Shanghai Siproin Microelectronics, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output CMOS output pin. Drives high or low based on touch detection; polarity set by VGM pin and mode (toggle vs synchronous) set by TBM pin. Source current ~0.4mA @3V (VOH=2.7V); sink ~19mA @3V (VOL=0.3V).
2 VSS power_in Ground reference pin. A 104 (100nF) decoupling capacitor must be connected between VDD and VSS with short traces.
3 Key bidirectional Capacitive touch sensor input port. Connects to the touch electrode via a series resistor (typ 1kΩ, range 05kΩ) and to ground via sensitivity adjustment capacitor CS (050pF, NPO/X7R recommended).
4 VGM input Output polarity select (internal pull-low, I-PL). Tie to VDD for active-low OUT; tie to VSS for active-high OUT.
5 VDD power_in Power supply input, 2.3V to 5.5V. Typical current ~2.5μA at 3V in low-power mode, ~5μA in fast mode. Requires a 104 (100nF) plus 10μF bulk decoupling capacitor to VSS.
6 TBM input Output mode select (internal pull-low, I-PL). Tie to VDD for Toggle output mode; tie to VSS for Synchronous output mode (auto-releases after max 9s key press).

Key specifications

Parameter Value
Manufacturer Shanghai Siproin Microelectronics
Package SOT-23-6
Category Sensor
Pins 6

CAD (KiCad official)

  • Symbol: SSP8011AM
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ssp8011am.step 97 KB You want the bare part, or you mark your own boards.
ssp8011am-etched.step 1.9 MB You want the part with SSP8011AM already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 475 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Siproin Microelectronics datasheet (7 pp, sha256 a368a8d57fd310bd, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF