Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM704TM6F

STMicroelectronics · Supervisor And Reset ICs · SO-8

STM704TM6F from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Supply output voltage for external LPSRAM connected to VCC through P-channel MOSFET switch when VCC is above switchover voltage VSO, or to VBAT when VCC falls below VSO.
2 VCC power_in Supply voltage input with operating range 1.1 to 5.5 V for supervisor circuit operation.
3 VSS power_in Ground reference and return path for supply voltage.
4 PFI input Power-fail input that triggers PFO output low when PFI is less than internal threshold VPFI (typ 1.237 V) or VCC falls below 2.4 V.
5 PFO output Power-fail output (push-pull) that goes low when PFI is less than VPFI or VCC falls below switchover voltage 2.4 V, otherwise remains high.
6 MR input Manual reset input (active-low) with internal 40 kΩ pull-up that asserts RST when pulled low and for trec (typ 200 ms) after returning high.
7 RST output Active-low reset output that stays low whenever VCC is below reset threshold (3.075 V typ for STM704T) or MR is held low, and remains asserted for trec after recovery.
8 VBAT power_in Backup battery input that switches to VOUT when VCC falls below switchover voltage VSO (2.4 V typical), may exceed VCC in voltage.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: STM704TM6F
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: stm704tm6f-etched.step / stm704tm6f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm704tm6f.step / stm704tm6f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (42 pp, sha256 7b0e1b14da4b9b31, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF