3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLMK04832NKDR
Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · WQFN-64-EP(9x9)
LMK04832NKDR from Texas Instruments, in a WQFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLKout0 | output | Programmable clock output 0 (positive), suggested as Device Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 2 | CLKout0* | output | Complementary programmable clock output 0*, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 3 | CLKout1 | output | Programmable clock output 1 (positive), suggested as SYSREF Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 4 | CLKout1* | output | Complementary programmable clock output 1*, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 5 | RESET/GPO | input | CMOS device reset input, or general-purpose output (GPO) when so programmed. |
| 6 | SYNC/SYSREF_REQ | input | CMOS synchronization input, or SYSREF_REQ input for requesting continuous SYSREF. |
| 7 | NC | unconnected | Do not connect. |
| 8 | NC | unconnected | Do not connect. |
| 9 | NC | unconnected | Do not connect. |
| 10 | Vcc1_VCO | power_in | Power supply for the VCO and clock distribution; VCC is 3.15 V to 3.45 V (3.3 V nominal) and all VCC pins must always be connected. |
| 11 | LDObyp1 | passive | Analog LDO bypass node, bypassed to ground with a 10-µF capacitor. |
| 12 | LDObyp2 | passive | Analog LDO bypass node, bypassed to ground with a 0.1-µF capacitor. |
| 13 | CLKout3 | output | Programmable clock output 3 (positive), suggested as SYSREF Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 14 | CLKout3* | output | Complementary programmable clock output 3*, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 15 | CLKout2 | output | Programmable clock output 2 (positive), suggested as Device Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 16 | CLKout2* | output | Complementary programmable clock output 2*, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 17 | Vcc2_CG1 | power_in | Power supply for clock outputs 2 and 3; VCC is 3.15 V to 3.45 V. |
| 18 | CS* | input | CMOS SPI chip select input. |
| 19 | SCK | input | CMOS SPI clock input. |
| 20 | SDIO | bidirectional | CMOS SPI data input/output. |
| 21 | Vcc3_SYSREF | power_in | Power supply for the SYSREF divider and SYNC; VCC is 3.15 V to 3.45 V. |
| 22 | CLKout5 | output | Programmable clock output 5 (positive), suggested as SYSREF Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 23 | CLKout5* | output | Complementary programmable clock output 5*, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 24 | CLKout4 | output | Programmable clock output 4 (positive), suggested as Device Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 25 | CLKout4* | output | Complementary programmable clock output 4*, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 26 | Vcc4_CG2 | power_in | Power supply for clock outputs 4, 5, 6 and 7; VCC is 3.15 V to 3.45 V. |
| 27 | CLKout6 | output | Programmable clock output 6 (positive), suggested as Device Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 28 | CLKout6* | output | Complementary programmable clock output 6*, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 29 | CLKout7 | output | Programmable clock output 7 (positive), suggested as SYSREF Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 30 | CLKout7* | output | Complementary programmable clock output 7*, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 31 | Status_LD1 | bidirectional | Programmable status pin (I/O) for PLL1 lock/status indication. |
| 32 | CPout1 | output | Analog charge pump 1 output for PLL1. |
| 33 | Vcc5_DIG | power_in | Power supply for the digital circuitry; VCC is 3.15 V to 3.45 V. |
| 34 | CLKin1 | input | Analog reference clock input port 1 for PLL1; also serves as FBCLKin (external feedback, 0-delay mode) and Fin1 (external VCO input or clock distribution input). |
| 35 | CLKin1* | input | Complementary analog reference clock input port 1* for PLL1; also serves as FBCLKin* (external feedback, 0-delay mode) and Fin1* (external VCO input or clock distribution input). |
| 36 | Vcc6_PLL1 | power_in | Power supply for PLL1, charge pump 1 and the holdover DAC; VCC is 3.15 V to 3.45 V. |
| 37 | CLKin0 | input | Analog reference clock input port 0 for PLL1. |
| 38 | CLKin0* | input | Complementary analog reference clock input port 0* for PLL1. |
| 39 | Vcc7_OSCout | power_in | Power supply for the OSCout port; VCC is 3.15 V to 3.45 V. |
| 40 | OSCout | bidirectional | Programmable buffered output of the OSCin port; also serves as CLKin2, reference clock input port 2 for PLL1. |
| 41 | OSCout* | bidirectional | Programmable complementary buffered output of the OSCin port*; also serves as CLKin2*, reference clock input port 2 for PLL1. |
| 42 | Vcc8_OSCin | power_in | Power supply for OSCin; VCC is 3.15 V to 3.45 V. |
| 43 | OSCin | input | Analog input providing feedback to PLL1 and the reference input to PLL2; AC-coupled. |
| 44 | OSCin* | input | Complementary analog input to PLL1 feedback and PLL2 reference; AC-coupled. |
| 45 | Vcc9_CP2 | power_in | Power supply for the PLL2 charge pump; VCC is 3.15 V to 3.45 V. |
| 46 | CPout2 | output | Analog charge pump 2 output for PLL2. |
| 47 | Vcc10_PLL2 | power_in | Power supply for PLL2; VCC is 3.15 V to 3.45 V. |
| 48 | Status_LD2 | bidirectional | Programmable status pin (I/O) for PLL2 lock/status indication. |
| 49 | CLKout9 | output | Programmable clock output 9 (positive), suggested as SYSREF Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 50 | CLKout9* | output | Complementary programmable clock output 9*, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 51 | CLKout8 | output | Programmable clock output 8 (positive), suggested as Device Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 52 | CLKout8* | output | Complementary programmable clock output 8*, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 53 | Vcc11_CG3 | power_in | Power supply for clock outputs 8, 9, 10 and 11; VCC is 3.15 V to 3.45 V. |
| 54 | CLKout10 | output | Programmable clock output 10 (positive), suggested as Device Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 55 | CLKout10* | output | Complementary programmable clock output 10*, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 56 | CLKout11 | output | Programmable clock output 11 (positive), suggested as SYSREF Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 57 | CLKout11* | output | Complementary programmable clock output 11*, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 58 | CLKin_SEL0 | bidirectional | Programmable status pin (I/O) used for CLKin selection. |
| 59 | CLKin_SEL1 | bidirectional | Programmable status pin (I/O) used for CLKin selection. |
| 60 | CLKout13 | output | Programmable clock output 13 (positive), suggested as SYSREF Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 61 | CLKout13* | output | Complementary programmable clock output 13*, with programmable formats CML, LVPECL, LCPECL, LVDS, or 2xLVCMOS. |
| 62 | CLKout12 | output | Programmable clock output 12 (positive), suggested as Device Clock for JESD204B systems, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 63 | CLKout12* | output | Complementary programmable clock output 12*, with programmable formats CML, LVPECL, LCPECL, or LVDS. |
| 64 | Vcc12_CG0 | power_in | Power supply for clock outputs 0, 1, 12 and 13; VCC is 3.15 V to 3.45 V. |
| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-64-EP(9x9) |
| Category | RTC/Clock Chip |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 3.6 | V | 5 | ||
| Input voltage | VIN | -0.3 | V | 5 | |||
| Lead temperature (solder 4 seconds) | TL | 260 | °C | solder 4 seconds | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Differential input current | IIN | -5 | 5 | mA | CLKinX/X*, OSCin/OSCin* | 5 | |
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Junction Temperature | TJ | 125 | °C | 6 | |||
| Ambient Temperature | TA | -40 | 25 | 85 | °C | 6 | |
| PCB Temperature (measured at thermal pad) | TPCB | 105 | °C | measured at thermal pad | 6 | ||
| Supply Voltage | VCC | 3.15 | 3.3 | 3.45 | V | 6 | |
| Power Down Supply Current | ICC_PD | 1.5 | 3 | mA | 6 | ||
| Supply Current for JESD204B use case during JESD204B synchronization | ICC_JESD204B_ALL | 930 | 1120 | mA | VCO = 2949.12 MHz; Dual Loop; 4 CML 32 mA clocks in bypass; 3 LVDS clock /12; 4 SYSREF as LCPECL; 3 SYSREF as LVDS | 6 | |
| Supply Current for JESD204B use case during JESD204B steady state, SYSREF held low (DC coupled) | ICC_JESD204B_LOW | 780 | 940 | mA | 4 CML 32 mA clocks in bypass; 3 LVDS clock /12; 4 SYSREF as LCPECL (low state); 3 SYSREF as LVDS (low state) | 6 | |
| Supply Current for JESD204B use case during JESD204B steady state, SYSREF outputs set to Vcm | ICC_JESD204B_VCM | 675 | 810 | mA | 4 CML 32 mA clocks in bypass; 3 LVDS clock /12; 7 SYSREF outputs powered down | 6 | |
| Clock Input LOS (CLKin0/1/2) | fCLKinX_LOS | 0.001 | 250 | MHz | LOS_EN = 1 | 7 | |
| Clock Input Frequency for PLL1 Reference (CLKin0/1/2), bipolar | fCLKin0_PLL1 | 0.001 | 750 | MHz | CLKinX_TYPE = 0 (Bipolar); CLKin0_OUT_MUX = 2 (PLL1) | 7 | |
| Clock Input Frequency for external VCO or distribution mode (CLKin1) | fCLKin1_Fin | 0.001 | 3250 | MHz | CLKin1_OUT_MUX = 0 (Fin); CLKin1_TYPE = 0 (Bipolar) | 7 | |
| Clock Input Slew Rate | SLEWCLKin | 0.15 | 0.5 | V/ns | 20% to 80% | 7 | |
| Differential Clock Input Voltage, AC-coupled | VIDCLKin_AC | 0.125 | 1.55 | /V/ | AC-coupled | 7 | |
| Clock Input Single-ended Input Voltage | VCLKin | 0.5 | 2.4 | Vpp | AC-coupled to CLKinX; CLKinX* AC-coupled to Ground; CLKinX_TYPE = 0 (Bipolar) | 7 | |
| DC offset voltage between CLKinX/CLKinX* (MOS mode) | /VCLKinX-offset/ | 55 | /mV/ | Each pin AC-coupled, CLKin0/1; CLKinX_TYPE = 1 (MOS) | 7 | ||
| High Input Voltage | VCLKinVIH | 2 | V | DC-coupled to CLKinX; CLKinX* AC-coupled to Ground; CLKinX_TYPE = 1 (MOS) | 7 | ||
| Low Input Voltage | VCLKinVIL | 0 | 0.4 | V | 7 | ||
| PLL1 Phase Detector Frequency | fPD1 | 40 | MHz | 8 | |||
| Charge Pump Sink / Source Mismatch | ICPout1%MIS | 1 | 10 | % | VCPout1 = Vcc/2, TA = 25 °C | 8 | |
| Charge Pump TRI-STATE Leakage Current | ICPout1TRI | 5 | nA | 0.5 V < VCPout1 < VCC - 0.5 V | 8 | ||
| PLL2 Reference Input | fOSCin | 500 | MHz | 9 | |||
| PLL2 Reference Clock minimum slew rate on OSCin | SLEWOSCin | 0.15 | 0.5 | V/ns | 20% to 80% | 9 | |
| Input Voltage for OSCin or OSCin* | VOSCin | 0.2 | 2.4 | Vpp | AC coupled; Single-ended (Unused pin AC-coupled to GND) | 9 | |
| Doubler input frequency | fdoubler_max | 320 | MHz | EN_PLL2_REF_2X = 1 | 9 | ||
| PLL2 Phase Detector Frequency | fPD2 | 320 | MHz | 9 | |||
| Charge Pump Sink / Source Mismatch (PLL2) | ICPout2%MIS | 1 | 10 | % | VCPout2 = Vcc/2, TA = 25 °C | 9 | |
| Charge Pump TRI-STATE Leakage Current (PLL2) | ICPout2 TRI | 10 | nA | 0.5 V < VCPout2 < VCC - 0.5 V | 9 | ||
| LMK04832 VCO Tuning Range, VCO0 | fVCO | 2440 | 2580 | MHz | VCO0 | 10 | |
| LMK04832 VCO Tuning Range, VCO1 | fVCO | 2945 | 3255 | MHz | VCO1 | 10 | |
| Allowable Temperature Drift for Continuous Lock | /ΔTCL/ | 125 | °C | After programming for lock, no changes to output configuration are permitted to assure continuous lock | 10 | ||
| Maximum skew CLKoutX to CLKoutX | /TSKEW/ | 60 | ps | FCLK = 1.6 GHz, RL = 100 Ω AC-coupled; any even CLKoutX, same format; DCLKX_Y_BYP = 1 | 12 | ||
| Maximum skew for CLKoutX to CLKoutX or CLKoutY to CLKoutY | /TSKEW/ | 60 | ps | FCLK = 250 MHz, RL = 100 Ω AC-coupled; even to even or odd to odd, same format; DCLKX_Y_BYP = 0; DCLKX_Y_DIV = 12 | 12 | ||
| Maximum skew for any CLKoutX or Y to any CLKoutX or Y | /TSKEW/ | 100 | ps | FCLK = 250 MHz, RL = 100 Ω AC-coupled; any output, same format; DCLKX_Y_BYP = 0; DCLKX_Y_DIV = 12 | 12 | ||
| Change in Magnitude of VOD for complementary output states (LVDS) | ΔVOD | -60 | 60 | mV | 15 | ||
| Output Offset Voltage (LVDS) | VOS | 1.125 | 1.25 | 1.375 | V | 15 | |
| Maximum Frequency (LVCMOS) | fCLKout | 250 | MHz | 5 pF Load | 16 | ||
| Output Low Voltage (LVCMOS) | VOL | 0.1 | V | 1 mA Load | 16 | ||
| Low-Level Output Voltage (CLKin_SELX, Status_LDX, RESET/GPO) | VOL | 0.4 | V | IOL = 500 µA; CLKin_SELX_TYPE, Status_LDX_TYPE or RESET_TYPE = 3, 4, or 6 | 16 | ||
| Low-Level Output Voltage (SDIO) | VOL | 0.4 | V | IOL = 500 µA; during SPI read; SDIO_RDBK_TYPE = 0 or 1 | 16 | ||
| High-Level Input Voltage | VIH | 1.2 | V | 16 | |||
| Low-Level Input Voltage | VIL | 0.5 | V | 16 | |||
| High-Level Input Current (CLKinX_SEL) | IIH | 10 | 80 | µA | VIH = VCC; CLKin_SELX_TYPE = 2 (Pull-down) | 16 | |
| Low-Level Input Current (CLKinX_SEL) | IIL | -40 | -5 | µA | VIL = 0 V; CLKin_SELX_TYPE = 1 (Pull up) | 16 | |
| Period of SCLK | tSCLK | 200 | ns | footnote (1): 5 MHz | 17 | ||
| Setup time for SDI edge to SCLK rising edge | tdS | 20 | ns | 17 | |||
| Hold time for SDI edge to SCLK rising edge | tdH | 10 | ns | 17 | |||
| Low width of SCLK | tLOW | 60 | ns | 17 | |||
| SCLK falling edge to valid read back data | tdV | 60 | ns | 17 | |||
| Junction-to-ambient thermal resistance | RθJA | 24.3 | °C/W | natural convection, JEDEC High-K board | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 6.1 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 3.5 | °C/W | 6 | |||
| Junction-to-top characterization parameter | ΨJT | 0.1 | °C/W | 6 | |||
| Junction-to-board characterization parameter | ΨJB | 3.5 | °C/W | 6 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 0.7 | °C/W | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | For any pins not connected, ensure that the exposed copper is of the same area as | 98 |
CAD (KiCad official)
- Symbol:
LMK04832NKDR - Footprint:
Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm - 3D model: WQFN-64-EP(9x9) (KiCad packages3D, STEP)
- 3D model files:
lmk04832nkdr-etched.step/lmk04832nkdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmk04832nkdr.step/lmk04832nkdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (107 pp, sha256
7ff317462edaf901, retrieved 2026-10-30, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).