3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC3621EMS8E#TRPBF
Analog Devices · DC-DC Converters · MSOP-8-EP
LTC3621EMS8E#TRPBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch node connection to the inductor of the step-down regulator. |
| 2 | VIN | power_in | Input voltage of the step-down regulator. |
| 3 | RUN | input | Logic-controlled RUN input that must not be left floating, with logic high activating the step-down regulator. |
| 4 | PGOOD | output | VOUT within regulation indicator output, present on the MSOP package only. |
| 5 | FB | input | Feedback input to the error amplifier, where VOUT = 0.6V • [1 + (R2/R1)] for adjustable versions and FB connects directly to VOUT for fixed VOUT options. |
| 6 | INTVCC | power_out | Low dropout regulator output that must be bypassed with at least 1µF to ground. |
| 7 | MODE/SYNC | input | Selects Burst Mode with 400mA peak clamp when tied to INTVCC, pulse skipping when tied to GND, forced continuous mode at a voltage between 1V and VINTVCC - 1.2V, and syncs to an external clock when driven. |
| 8 | SGND | power_in | Signal ground, present on the MSOP package only. |
| 9 | GND | power_in | Exposed pad ground backplane for power and signal ground that must be soldered to PCB ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VIN | 2.7 | 17 | V | 4 | ||
| Regulated Feedback Voltage (LTC3621) | VFB | 0.594 | 0.6 | 0.606 | V | 4 | |
| Regulated Feedback Voltage (LTC3621), over operating junction temperature range | VFB | 0.591 | 0.6 | 0.609 | V | l: over operating junction temperature range | 4 |
| Reference Voltage Line Regulation | ΔVLINE(REG) | 0.01 | 0.015 | %/V | VIN = 2.7V to 17V | 4 | |
| NMOS Switch Leakage | ILSW | 0.1 | 1 | µA | 4 | ||
| PMOS Switch Leakage | ILSW | 0.1 | 1 | µA | 4 | ||
| NMOS On-Resistance (Bottom FET) | RDS(ON) | 0.15 | Ω | VIN = 5V | 4 | ||
| PMOS On-Resistance (Top FET) | RDS(ON) | 0.37 | Ω | 4 | |||
| Maximum Duty Cycle | DMAX | 100 | % | VFB = 0.5V, VMODE/SYNC = 1.5V; l | 4 | ||
| Minimum On-Time | tON(MIN) | 60 | ns | 4 | |||
| RUN Input High Threshold | VRUN | 1 | V | 4 | |||
| RUN Input Low Threshold | VRUN | 0.3 | V | 4 | |||
| RUN Input Current | IRUN | 0 | 20 | nA | VRUN = 12V | 4 | |
| MODE/SYNC Input Current | IMODE/SYNC | 0 | 20 | nA | 4 | ||
| Forced Continuous Mode MODE/SYNC voltage | VMODE/SYNC | 1 | V | Forced Continuous Mode | 4 | ||
| Internal Soft-Start Time | tSS | 0.8 | ms | 4 | |||
| Peak Current Limit (E/I-Grade) | ILIM | 1.44 | 1.6 | 1.76 | A | E/I-Grade | 4 |
| VINTVCC Undervoltage Lockout | VUVLO | 2.4 | 2.6 | 2.7 | V | VIN Ramping Up | 4 |
| VINTVCC Undervoltage Lockout Hysteresis | VUVLO(HYS) | 250 | mV | 4 | |||
| VIN Overvoltage Lockout Rising | VOVLO | 18 | 19 | 20 | V | l | 4 |
| VIN Overvoltage Lockout Hysteresis | VOVLO(HYS) | 300 | mV | 4 | |||
| Oscillator Frequency (E/I-Grade, LTC3621) | fOSC | 0.92 | 1 | 1.08 | MHz | E/I-Grade; l | 5 |
| SYNC Capture Range | fSYNC | 60 | 140 | % | 5 | ||
| VINTVCC LDO Output Voltage | VINTVCC | 3.6 | V | VIN > 4V | 5 | ||
| Power Good Range | ΔVPGOOD | -7.5 | 7.5 | % | 5 | ||
| Power Good Resistance | RPGOOD | 275 | 350 | Ω | PGOOD RDS(ON) at 500µA | 5 | |
| PGOOD Delay PGOOD Low to High | tPGOOD | 0 | Cycles | 5 | |||
| PGOOD Delay PGOOD High to Low | tPGOOD | 32 | Cycles | 5 | |||
| PGOOD Leakage Current | IPGOOD | 100 | nA | 5 | |||
| VIN Voltage (absolute maximum) | VIN | -0.3 | 17 | V | 2 | ||
| RUN Voltage (absolute maximum) | VRUN | -0.3 | V | VIN to -0.3V | 2 | ||
| MODE/SYNC, FB Voltages (absolute maximum) | VMODE/SYNC, VFB | -0.3 | 6 | V | 2 | ||
| PGOOD Voltages (absolute maximum) | VPGOOD | -0.3 | 6 | V | 2 | ||
| Operating Junction Temperature Range (E grade) | TJ | -40 | 125 | °C | LTC3621E | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Maximum Junction Temperature (MS8E package) | TJMAX | 150 | °C | MS8E package | 2 | ||
| Junction-to-Ambient Thermal Resistance (MS8E package) | θJA | 40 | °C/W | MS8E package | 2 | ||
| Junction-to-Case Thermal Resistance (MS8E package) | θJC | 10 | °C/W | MS8E package | 2 |
CAD (KiCad official)
- Symbol:
LTC3621EMS8E#TRPBF - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
ltc3621ems8e-trpbf-etched.step/ltc3621ems8e-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc3621ems8e-trpbf.step/ltc3621ems8e-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
82b884bf58700a7a, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).