3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMS4344
Hangzhou Ruimeng Tech · Digital To Analog Converters (DACs) · MSOP-10
MS4344 from Hangzhou Ruimeng Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDIN | input | Serial audio data input; audio data enters the input buffer on SDIN, which must be set up at least 20 ns before the SCLK rising edge. |
| 2 | SCLK | input | External serial clock input; SCLK pulse width low and high are each at least 20 ns and duty cycle is 45% to 55%. |
| 3 | LRCK | input | Left/right channel clock input that selects the channel of the incoming serial data; LRCK must be synchronous with MCLK. |
| 4 | MCLK | input | Master clock input; MCLK frequency is 2 to 50 MHz with 45% to 55% duty cycle and must be an integer multiple of LRCK. |
| 5 | VQ | bidirectional | DC bias output at 0.5×VDD that sets the output quiescent level, with maximum load current IQmax of 1 mA; a 10 µF capacitor requires about 400 ms startup. |
| 6 | FILT | bidirectional | Positive reference voltage pin for the internal reference, which must be decoupled with capacitors placed as close to the chip as possible. |
| 7 | OUTL | output | Analog left channel output; maximum DC current from AOUT is 3.3 mA, maximum resistive load is 1 kΩ and maximum capacitive load is 1000 pF. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | VDD | power_in | Analog supply; the device operates from 3.0 V to 5.5 V with absolute maximum VDD of -0.3 V to 7 V. |
| 10 | OUTR | output | Analog right channel output; maximum DC current from AOUT is 3.3 mA, maximum resistive load is 1 kΩ and maximum capacitive load is 1000 pF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hangzhou Ruimeng Tech |
| Package | MSOP-10 |
| Category | Data Converters |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 7 | V | 4 | ||
| Input pin current | Iin | -10 | 10 | uA | 4 | ||
| Digital input voltage | VIND | -0.3 | V | 4 | |||
| Operating temperature | TOP | -55 | 125 | ℃ | 4 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 4 | ||
| Supply voltage range | VDD | 3 | 5.5 | V | 4 | ||
| Ambient temperature range | TA | -40 | 85 | ℃ | 4 | ||
| Full-scale output voltage (multiple of VDD) | 0.63 | 0.66 | 0.69 | Vpp | 3.3V; printed as coefficient x VDD | 5 | |
| AOUT max DC current | IOUTmax | 3.3 | mA | 5 | |||
| VQ max current | IQmax | 1 | mA | 5 | |||
| Max resistive load | RL | 1 | kΩ | 5 | |||
| Max capacitive load | CL | 1000 | pF | 5 | |||
| Input low level | VIL | 0.6 | V | 6 | |||
| Frequency response 40Hz to 15kHz (Single-Speed) | -0.07 | 0.55 | dB | Single-Speed mode, 40Hz to 15KHz | 6 | ||
| Frequency response 40Hz to 15kHz (Double-Speed) | -0.02 | 0.2 | dB | Double-Speed mode, 40Hz to 15KHz | 6 | ||
| Frequency response 40Hz to 15kHz (Quad-Speed) | -0.01 | 0.1 | dB | Quad-Speed mode, 40Hz to 15KHz | 6 | ||
| LRCK duty cycle | 45 | 50 | 55 | % | 7 | ||
| SCLK duty cycle | 45 | 50 | 55 | % | 7 | ||
| MCLK duty cycle | 45 | 55 | % | 7 | |||
| Input sample rate (MCLK/LRCK) | Fs | 8 | 50 | kHz | 256x,384x,1024x | 7 |
CAD (KiCad official)
- Symbol:
MS4344 - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
ms4344-etched.step/ms4344-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ms4344.step/ms4344.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hangzhou Ruimeng Tech datasheet (15 pp, sha256
30002707f278a46d, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).