component
LMH6525SP
Public Made by Adomby adom
Texas Instruments Laser Drivers, UQFN-28(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLMH6525SP
Texas Instruments · Laser Drivers · UQFN-28(5x5)
LMH6525SP from Texas Instruments, in a UQFN-28(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IOUTA | output | Laser driver output channel A, selected by the SEL pin and summing the active channel currents. |
| 2 | ENOSC | input | LVDS oscillator enable pin; internal oscillator is activated if the logical input is high. |
| 3 | ENOSCB | input | LVDS oscillator enable pin B (LMH6525 only); internal oscillator is activated if the logical input is low. |
| 4 | ENR | input | Read channel enable pin; read channel is active if pin is high. |
| 5 | ENABLE | input | Chip enable pin; chip is enabled if pin is high, and all outputs are off when low. |
| 6 | VDDA | power_in | Supply voltage A (5V single-supply operation). |
| 7 | GNDA | power_in | Ground connection A. |
| 8 | IR | input | Read channel current setting; 1 mA input current results in 150 mA output current. |
| 9 | I2 | input | Channel 2 current setting; 1 mA input current results in 300 mA output current. |
| 10 | I3 | input | Channel 3 current setting; 1 mA input current results in 150 mA output current. |
| 11 | I4 | input | Channel 4 current setting; 1 mA input current results in 150 mA output current. |
| 12 | RFA | passive | Oscillator frequency setting channel A, set by external resistor to ground. |
| 13 | RFB | passive | Oscillator frequency setting channel B, set by external resistor to ground. |
| 14 | RAA | passive | Oscillator amplitude setting channel A, set by external resistor to ground. |
| 15 | RAB | passive | Oscillator amplitude setting channel B, set by external resistor to ground. |
| 16 | SELB | input | Channel select B (LMH6525); channel is selected if pin is high. |
| 17 | EN2B | input | LVDS input channel 2B; channel 2 is active if logical input is low. |
| 18 | EN2 | input | LVDS input channel 2; channel 2 is active if logical input is high. |
| 19 | EN3B | input | LVDS input channel 3B; channel 3 is active if logical input is low. |
| 20 | EN3 | input | LVDS input channel 3; channel 3 is active if logical input is high. |
| 21 | EN4B | input | LVDS input channel 4B; channel 4 is active if logical input is low. |
| 22 | EN4 | input | LVDS input channel 4; channel 4 is active if logical input is high. |
| 23 | NC | unconnected | No connect. |
| 24 | VDD | power_in | Supply voltage (5V single-supply operation). |
| 25 | VDD | power_in | Supply voltage (5V single-supply operation). |
| 26 | VDD | power_in | Supply voltage (5V single-supply operation). |
| 27 | IOUTB | output | Laser driver output channel B, selected by the SEL pin and summing the active channel currents. |
| 28 | GNDB | power_in | Ground connection B. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | UQFN-28(5x5) |
| Category | LED Drivers |
| Pins | 29 |
CAD (KiCad official)
- Symbol:
LMH6525SP - Footprint:
Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm - 3D model: UQFN-28(5x5) (KiCad packages3D, STEP)
- 3D model files:
lmh6525sp-etched.step/lmh6525sp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmh6525sp.step/lmh6525sp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
dbcf16bbe08e0a13, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).