component
SWPCBV33EF-80.000000D
Public Made by Adomby adom
Starwave Pre-Programmed Oscillators, SMD3225-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSWPCBV33EF-80.000000D
Starwave · Pre-Programmed Oscillators · SMD3225-4P
SWPCBV33EF-80.000000D from Starwave, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Tri-state | input | Tri-state enable/disable pin: the output is enabled at 0.7 x VDD or higher and disabled at 0.3 x VDD or lower. |
| 2 | GND | power_in | Ground reference; a 0.1 µF bypass capacitor should be placed as close to the part as possible between the VDD and GND pads. |
| 3 | Output | output | Clock output with high level of 90% VDD minimum and low level of 10% VDD maximum, driving a 15 pF load with rise/fall time of 2 ns (3 ns at 1.8V). |
| 4 | VDD | power_in | Supply voltage of 1.8V, 2.5V or 3.3V, each with ±5% variation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Starwave |
| Package | SMD3225-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Variation (3.3V column) | VDD | -5 | 5 | % of VDD | 3.3V column; printed as VDD-5% to VDD+5% | 1 | |
| Frequency Range (3.3V column) | 1 | 200 | MHz | 3.3V column | 1 | ||
| Supply Current | 35 | mA | 3.3V column; @15pF loading | 1 | |||
| Output High | 90 | %VDD | 3.3V column; printed as 90%VDD | 1 | |||
| Output Low | 10 | %VDD | 3.3V column; printed as 10%VDD | 1 | |||
| Transition Time (Rise Time / Fall Time) | 2 | nSec | 3.3V column; measured 10% to 90% of VDD, 15pF load | 1 | |||
| Duty Cycle | 45 | 55 | % | 3.3V column | 1 | ||
| Startup Time | 8 | mSec | 3.3V column | 1 | |||
| Tri-State Output Enable | 0.7 | x VDD | 3.3V column; printed as 0.7 x VDD | 1 | |||
| Tri-State Output Disable | 0.3 | x VDD | 3.3V column; printed as 0.3 x VDD | 1 | |||
| Stand by Current (@PD Mode) | 400 | uA | 3.3V column; @PD mode | 1 | |||
| Stand by Current (@OE Mode) | 20 | mA | 3.3V column; @OE mode | 1 | |||
| RMS Phase Jitter | 2 | pSec | 12KHz to 20MHz | 1 | |||
| Aging | 3 | ppm | @25°C, First Year | 1 | |||
| Storage Temp. Range | -50 | 125 | oC | 1 | |||
| Frequency Stability (grade B, ±20 ppm) | -20 | 20 | ppm | Grade B per ordering code; inclusive of calibration @25°C, operating temperature range, input voltage, load, aging (1st year), shock and vibration | 2 | ||
| Operating Temperature Range (Industrial, V) | -40 | 85 | ºC | Temperature range code V (Industrial) per ordering code | 2 | ||
| Supply Voltage Tolerance (ordering code 33) | VDD | -10 | 10 | % | Ordering code '33' for 3.3V ±10% | 2 |
CAD (KiCad official)
- Symbol:
SWPCBV33EF-80.000000D - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
swpcbv33ef-80-000000d-etched.step/swpcbv33ef-80-000000d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);swpcbv33ef-80-000000d.step/swpcbv33ef-80-000000d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Starwave datasheet (2 pp, sha256
d68247beab904be9, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).