component
TPS7A25125DRVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS7A25125DRVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)
TPS7A25125DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output pin that requires a capacitor from OUT to ground for stability, placed as close to OUT and GND as possible, using the value in the Recommended Operating Conditions table. |
| 2 | NC | unconnected | No internal connection on the fixed-voltage version; the pin can be left floating, but tying it to GND gives better thermal performance. |
| 3 | PG | output | Open-collector power-good output that must be pulled up externally to OUT or another rail; it goes high when VOUT exceeds VIT(PG,RISING) and is driven low when VOUT falls below VIT(PG,FALLING). |
| 4 | EN | input | Enable input that must be driven above VEN(HI) to turn the regulator on and below VEN(LOW) to place it in low-current shutdown; it must not be left floating and should be connected to IN if unused. |
| 5 | GND | power_in | Ground reference pin for the regulator, which should be connected to a large-area ground plane for best thermal performance. |
| 6 | IN | power_in | Input supply pin that should have the recommended or larger capacitor from IN to GND placed as close to the pins as possible for best transient response and low input impedance. |
| 7 | Thermal pad | passive | Exposed thermal pad that may be connected to ground or left floating, and should be tied to a large-area ground plane for best thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
CAD (KiCad official)
- Symbol:
TPS7A25125DRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps7a25125drvr-etched.step/tps7a25125drvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a25125drvr.step/tps7a25125drvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
621835e83153f84e, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).