Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HV6810WG-G

Microchip Tech · LCD Drivers · SOIC-20-300mil

HV6810WG-G from Microchip Tech, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Q8 output High-voltage DMOS latched driver output Q8, rated for 80V output voltage with 25 mA source-current capability.
2 Q7 output High-voltage DMOS latched driver output Q7, rated for 80V output voltage with 25 mA source-current capability.
3 Q6 output High-voltage DMOS latched driver output Q6, rated for 80V output voltage with 25 mA source-current capability.
4 CLOCK input Clock input; data are shifted into the data shift register on the positive edge of the clock, with a minimum clock-high pulse width of 100 ns and a maximum clock frequency of 5 MHz.
5 VSS power_in Ground connection, usually 0V; all voltages in the datasheet are referenced to VSS.
6 N/C unconnected No connection.
7 VDD power_in Low-voltage logic power supply, 4.5V to 5.5V.
8 LE (STROBE) input Latch enable strobe; parallel data pass to the Q outputs while LE is high and are held in the latches when LE is low, with a minimum LE-high pulse width of 100 ns.
9 Q5 output High-voltage DMOS latched driver output Q5, rated for 80V output voltage with 25 mA source-current capability.
10 Q4 output High-voltage DMOS latched driver output Q4, rated for 80V output voltage with 25 mA source-current capability.
11 Q3 output High-voltage DMOS latched driver output Q3, rated for 80V output voltage with 25 mA source-current capability.
12 Q2 output High-voltage DMOS latched driver output Q2, rated for 80V output voltage with 25 mA source-current capability.
13 Q1 output High-voltage DMOS latched driver output Q1, rated for 80V output voltage with 25 mA source-current capability.
14 BLANKING input When blanking is high, all Q outputs are forced low regardless of the data in each channel.
15 DATA IN input Serial data input to the input shift register.
16 VBB power_in High-voltage driver supply, 20V to 80V, which should not drop below VDD or float during operation.
17 SERIAL DATA OUT output Serial output of the shift register, used to cascade additional devices for larger displays.
18 N/C unconnected No connection.
19 Q10 output High-voltage DMOS latched driver output Q10, rated for 80V output voltage with 25 mA source-current capability.
20 Q9 output High-voltage DMOS latched driver output Q9, rated for 80V output voltage with 25 mA source-current capability.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-20-300mil
Category Display Modules / LED Drivers / Display Drivers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic Supply Voltage VDD 4.5 5.5 V 3
High Supply Voltage VBB 20 80 V 3
High-level Input Voltage (for VDD = 5V) VIH 3.5 5.3 V for VDD = 5V 3
Low-level Input Voltage VIL -0.3 0.8 V 3
Continuous High-level Q Output Current IOH 25 mA 3
Clock Frequency fCLK 5 MHz 3
Operating Ambient Temperature TA -40 85 °C 3
High-level Output Voltage, Q Outputs VOH 57.5 58 V IO = +25 mA 3
High-level Output Voltage, Serial Output VOH 4 4.5 V VDD = +4.5V, IOL = +100 µA 3
Low-level Output Voltage, Q Outputs VOL 0.15 1 V IO = -100 µA, blanking input at VDD 3
Low-level Output Voltage, Serial Output VOL 0.05 0.1 V VDD = +4.5V, IO = -100 µA 3
Low-level Q Output Current (Pull-down Current) IOL 60 80 µA TA = Max, VOL = +0.7V (Note 1) 3
Off-state Output Current IO(OFF) -1 -15 µA VO = 0V, blanking input at VDD (Note 1) 3
High-level Input Current IIH 1 µA VlN = VDD 3
Supply Current from VDD (Standby) IDD 10 50 µA All inputs at 0V, one Q output high 3
Supply Current from VBB IBB 0.05 0.1 mA All outputs low, all Q outputs open 4
Pulse Duration, Clock High tW(CKH) 100 ns 4
Pulse Duration, Latch Enable High tW(LEH) 100 ns 4
Setup Time, Data before Clock tSU(D) 50 ns 4
Hold Time, Data after Clock tH(D) 50 ns 4
Delay Time, Clock to Latch Enable High tCKH-LEH 50 ns 4
Absolute Maximum Logic Supply Voltage VDD 7.5 V Note 2: referenced to VSS 3
Absolute Maximum Driver Supply Voltage VBB 90 V Note 2: referenced to VSS 3
Absolute Maximum Output Voltage 90 V Note 2: referenced to VSS 3
Absolute Maximum Input Voltage -0.3 V to VDD +0.3V (Note 2) 3
Absolute Maximum Operating Ambient Temperature TA -45 85 °C Note 1: over operating free-air temperature 3
Continuous Total Power Dissipation at 25°C Free-air Temperature, 20-lead SOW 1500 mW at 25°C free-air temperature (Note 3) 3
Thermal Resistance, Junction to Ambient, 20-lead SOW θJA 66 °C/W 4
Propagation Delay Time, Latch Enable to Output tPD 300 ns Switching characteristics, VBB = 60V, TA = 25°C (Note 1) 4

CAD (KiCad official)

  • Symbol: HV6810WG-G
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: hv6810wg-g-etched.step / hv6810wg-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hv6810wg-g.step / hv6810wg-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (14 pp, sha256 fa954c9d7f374544, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF