3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL4013E1
XLSEMI · DC-DC Converters · TO-252-5
XL4013E1 from XLSEMI, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. Care must be taken in layout: this pin should be placed outside of the Schottky diode-to-output-capacitor ground path to prevent switching current spikes from inducing voltage noise into the XL4013. |
| 2 | FB | input | Feedback pin. Through an external resistor divider network, FB senses the output voltage and regulates it. The feedback threshold voltage is 1.25 V (VOUT = 1.25 * (1 + R2/R1)). |
| 3 | SW | passive | Power switch output pin. SW is the switch node that supplies power to the output through the external inductor and Schottky catch diode. The metal tab of the TO252-5L is also connected to SW. |
| 4 | VC | input | Internal voltage regulator bypass capacitor pin. Connect a 1 uF capacitor from VC to VIN to bypass the internal 3.3 V regulator. |
| 5 | VIN | power_in | Supply voltage input pin. XL4013 operates from an 8 V to 36 V DC input (absolute max 40 V). Bypass VIN to GND with a suitably large capacitor (e.g. 100 uF/50 V) to eliminate noise on the input. |
| 6 | SW | passive | Package tab (pad 6). printed: Metal Tab SW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-252-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 1.225 | 1.25 | 1.275 | V | Vin = 8V to 36V, Vout=5V, Iload=0.5A to 4A | 5 |
| Input operation voltage | Vin | 8 | 36 | V | 5 | ||
| Quiescent Supply Current | Iq | 2.1 | 5 | mA | VFB =5V | 5 | |
| Oscillator Frequency | Fosc | 144 | 180 | 216 | KHz | 5 | |
| Output Power PMOS Rdson | Rdson | 60 | 80 | mohm | VFB=0V, Vin=12V, ISW=4A | 5 | |
| Input Voltage (absolute maximum) | Vin | -0.3 | 40 | V | 4 | ||
| Feedback Pin Voltage (absolute maximum) | VFB | -0.3 | 7 | V | 4 | ||
| Output Switch Pin Voltage (absolute maximum, lower limit) | VSW | -0.3 | V | 4 | |||
| Operating Junction Temperature | TJ | -40 | 125 | oC | 4 | ||
| Storage Temperature | TSTG | -65 | 150 | oC | 4 | ||
| Lead Temperature (Soldering) | TLEAD | 260 | oC | Soldering, 10 sec | 4 | ||
| ESD (HBM) | 2000 | V | HBM, printed as >2000 | 4 | |||
| Thermal Resistance Junction to Ambient (TO252-5L) | RJA | 50 | oC /W | Junction to Ambient, No Heatsink, Free Air | 4 | ||
| TTL shutdown high level | 3.3 | 7 | V | Referenced to ground; converter shuts down | 8 | ||
| TTL shutdown low level | 0.8 | V | Referenced to ground; converter turns on | 8 | |||
| Input current in shutdown | 5 | mA | TTL shutdown active | 8 |
CAD (KiCad official)
- Symbol:
XL4013E1 - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
xl4013e1-etched.step/xl4013e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl4013e1.step/xl4013e1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (10 pp, sha256
c5fbf5aaf98d1650, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).