component
LM75AIMM
Public Made by Adomby adom
Texas Instruments Temperature Sensors, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM75AIMM
Texas Instruments · Temperature Sensors · VSSOP-8-0.65mm
LM75AIMM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | I2C serial bi-directional data line, open-drain interface connected to controller with pull-up resistor or current source. |
| 2 | SCL | input | I2C clock input from controller, tied to pull-up resistor or current source. |
| 3 | O.S. | tri_state | Overtemperature shutdown open-drain output with pull-up resistor to controller interrupt line. |
| 4 | GND | power_in | Power supply ground. |
| 5 | A2 | input | User-set I2C address input; connect to ground for logic 0 or +VS for logic 1. |
| 6 | A1 | input | User-set I2C address input; connect to ground for logic 0 or +VS for logic 1. |
| 7 | A0 | input | User-set I2C address input; connect to ground for logic 0 or +VS for logic 1. |
| 8 | +VS | power_in | Positive supply voltage input, DC 2.7 V to 5.5 V, with 100-nF bypass and 10-µF bulk capacitance nearby. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM75AIMM - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lm75aimm-etched.step/lm75aimm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm75aimm.step/lm75aimm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
beb63b88795619ca, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).