component
TPS3703A5290DSERQ1
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, WSON-6(1.5x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS3703A5290DSERQ1
Texas Instruments · Supervisor And Reset ICs · WSON-6(1.5x1.5)
TPS3703A5290DSERQ1 from Texas Instruments, in a WSON-6(1.5x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | input | Input for the monitored supply rail; RESET is driven low when SENSE rises above the overvoltage threshold VIT+(OV) or falls below the undervoltage threshold VIT-(UV), and it should be tied to VDD to monitor the VDD supply. |
| 2 | VDD | power_in | Supply voltage input with a recommended range of 1.7 V to 5.5 V, and a 0.1-µF ceramic capacitor should be placed close to this pin. |
| 3 | CT | input | Capacitor time delay pin that selects a fixed delay when tied to VDD (through a 10 kΩ pull-up, recommended) or left floating, or programs the delay when an external capacitor is connected to ground. |
| 4 | RESET | output | Active-low open-drain output that goes low when SENSE is above VIT+(OV) or below VIT-(UV), and requires a pull-up resistor to a desired voltage with an output current of 0.3 mA to 10 mA recommended (absolute maximum ±40 mA). |
| 5 | GND | power_in | Ground reference pin for the device. |
| 6 | MR | input | Manual reset input that asserts RESET when pulled to a logic low (VMR_L); it may be left floating or connected to VDD because it is internally pulled up, and its voltage is rated 0 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6(1.5x1.5) |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS3703A5290DSERQ1 - Footprint:
Package_SON:WSON-6_1.5x1.5mm_P0.5mm - 3D model: WSON-6(1.5x1.5) (KiCad packages3D, STEP)
- 3D model files:
tps3703a5290dserq1-etched.step/tps3703a5290dserq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3703a5290dserq1.step/tps3703a5290dserq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
05a6581745cb5982, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).