3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC24FJ128GB106T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC24FJ128GB106T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE5/PMD5 | bidirectional | PORTE digital I/O with ST/TTL input buffer, also parallel master port data PMD5 and interrupt-on-change input CN63. |
| 2 | RE6/PMD6/SCL3 | bidirectional | PORTE digital I/O with ST/TTL input buffer, also parallel master port data PMD6 and I2C3 clock SCL3. |
| 3 | RE7/PMD7/SDA3 | bidirectional | PORTE digital I/O with ST/TTL input buffer, also parallel master port data PMD7 and I2C3 data SDA3. |
| 4 | RG6/PMA5/C1IND | bidirectional | PORTG digital I/O with ST input buffer, also parallel master port address PMA5 and comparator 1 input D (analog). |
| 5 | RG7/PMA4/C1INC | bidirectional | PORTG digital I/O with ST input buffer, also parallel master port address PMA4 and comparator 1 input C (analog). |
| 6 | RG8/PMA3/C2IND | bidirectional | PORTG digital I/O with ST input buffer, also parallel master port address PMA3 and comparator 2 input D (analog). |
| 7 | MCLR | input | Master Clear (device Reset) input; the line is brought low to cause a Reset. |
| 8 | RG9/PMA2/C2INC | bidirectional | PORTG digital I/O with ST input buffer, also parallel master port address PMA2 and comparator 2 input C (analog). |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 11 | RB5/PGEC3/C1INA/VBUSON | bidirectional | PORTB digital I/O with ST input buffer, also ICSP clock PGEC3, comparator 1 input A and USB OTG charge pump control VBUSON. |
| 12 | RB4/PGED3/C1INB/USBOEN | bidirectional | PORTB digital I/O with ST input buffer, also ICSP data PGED3, comparator 1 input B and USB output enable USBOEN. |
| 13 | RB3/AN3/VPIO | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN3 and USB differential plus input/output VPIO (external transceiver). |
| 14 | RB2/AN2/VMIO | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN2 and USB differential minus input/output VMIO (external transceiver). |
| 15 | RB1/AN1/PGEC1/VREF- | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN1, ICSP clock PGEC1 and A/D and comparator reference voltage (low) VREF-. |
| 16 | RB0/AN0/PGED1/VREF+ | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN0, ICSP data PGED1 and A/D and comparator reference voltage (high) VREF+. |
| 17 | RB6/AN6/PGEC2 | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN6 and ICSP clock PGEC2. |
| 18 | RB7/AN7/PGED2/RCV | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN7, ICSP data PGED2 and USB receive input RCV from external transceiver. |
| 19 | AVDD | power_in | Positive supply for analog modules. |
| 20 | AVSS | power_in | Ground reference for analog modules. |
| 21 | RB8/AN8 | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN8. |
| 22 | RB9/AN9 | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN9. |
| 23 | RB10/AN10/CVREF/TMS | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN10, comparator voltage reference output CVREF and JTAG test mode select TMS. |
| 24 | RB11/AN11/TDO | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN11 and JTAG test data output TDO. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 27 | RB12/AN12/TCK/CTED2 | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN12, JTAG test clock TCK and CTMU external edge input 2. |
| 28 | RB13/AN13/TDI/CTED1 | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN13, JTAG test data input TDI and CTMU external edge input 1. |
| 29 | RB14/AN14/CTPLS | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN14 and CTMU pulse output CTPLS. |
| 30 | RB15/AN15/REFO | bidirectional | PORTB digital I/O with ST input buffer, also A/D analog input AN15 and reference clock output REFO. |
| 31 | RF4/SDA2/RP10 | bidirectional | PORTF digital I/O with ST input buffer, also I2C2 data SDA2 and remappable peripheral RP10. |
| 32 | RF5/SCL2/RP17 | bidirectional | PORTF digital I/O with ST input buffer, also I2C2 clock SCL2 and remappable peripheral RP17. |
| 33 | RF3/USBID/RP16 | bidirectional | PORTF digital I/O with ST input buffer, also USB OTG ID input USBID (OTG mode only) and remappable peripheral RP16. |
| 34 | VBUS | power_in | USB voltage in host mode, 5V. |
| 35 | VUSB | power_in | USB voltage, 3.3V. |
| 36 | D-/RG3 | bidirectional | USB differential minus line of the internal transceiver, also PORTG input RG3 with ST input buffer. |
| 37 | D+/RG2 | bidirectional | USB differential plus line of the internal transceiver, also PORTG input RG2 with ST input buffer. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 39 | RC12/OSCI/CLKI | bidirectional | PORTC digital I/O with ST input buffer, also main oscillator input OSCI and main clock input CLKI. |
| 40 | RC15/OSCO/CLKO | bidirectional | PORTC digital I/O with ST input buffer, also main oscillator output OSCO and system clock output CLKO. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RD8/RTCC/DMLN | bidirectional | PORTD digital I/O with ST input buffer, also RTCC alarm/seconds pulse output RTCC and USB D- external pull-down control DMLN. |
| 43 | RD9/SDA1/DPLN | bidirectional | PORTD digital I/O with ST input buffer, also I2C1 data SDA1 and USB D+ external pull-down control DPLN. |
| 44 | RD10/SCL1/PMCS2 | bidirectional | PORTD digital I/O with ST input buffer, also I2C1 clock SCL1 and parallel master port chip select 2 PMCS2. |
| 45 | RD11/PMCS1 | bidirectional | PORTD digital I/O with ST input buffer, also parallel master port chip select 1 PMCS1. |
| 46 | RD0/INT0/DMH/RP11 | bidirectional | PORTD digital I/O with ST input buffer, also external interrupt INT0, USB D- external pull-up control DMH and remappable peripheral RP11. |
| 47 | RC13/SOSCI/CN1 | bidirectional | PORTC digital I/O with ST input buffer, also secondary oscillator/Timer1 clock input SOSCI and interrupt-on-change input CN1. |
| 48 | RC14/SOSCO/T1CK | bidirectional | PORTC digital I/O with ST input buffer, also secondary oscillator/Timer1 clock output SOSCO and Timer1 clock T1CK. |
| 49 | RD1/VCPCON/RP24 | bidirectional | PORTD digital I/O with ST input buffer, also USB OTG VBUS PWM/charge output VCPCON and remappable peripheral RP24. |
| 50 | RD2/DPH/RP23 | bidirectional | PORTD digital I/O with ST input buffer, also USB D+ external pull-up control DPH and remappable peripheral RP23. |
| 51 | RD3/PMBE/RP22 | bidirectional | PORTD digital I/O with ST input buffer, also parallel master port byte enable strobe PMBE and remappable peripheral RP22. |
| 52 | RD4/PMWR/RP25 | bidirectional | PORTD digital I/O with ST input buffer, also parallel master port write strobe PMWR and remappable peripheral RP25. |
| 53 | RD5/PMRD/RPI35 | bidirectional | PORTD digital I/O with ST input buffer, also parallel master port read strobe PMRD and remappable input RPI35. |
| 54 | RD6/RP68 | bidirectional | PORTD digital I/O with ST input buffer, also comparator 3 and remappable function position per the 64-pin table (C3INB). |
| 55 | RD7/C3INA | bidirectional | PORTD digital I/O with ST input buffer, also comparator 3 input A (analog). |
| 56 | VCAP/VDDCORE | passive | External filter capacitor connection when the regulator is enabled, or core supply VDDCORE when the regulator is disabled. |
| 57 | ENVREG | input | Voltage regulator enable input, connected to VDD to enable the regulator or to ground to disable it. |
| 58 | RF0/VBUSST/VCMPST1 | bidirectional | PORTF digital I/O with ST input buffer, also USB OTG charge pump feedback VBUSST and USB VBUS boost comparator input VCMPST1. |
| 59 | RF1/VCMPST2 | bidirectional | PORTF digital I/O with ST input buffer, also USB VBUS boost generator comparator input VCMPST2. |
| 60 | RE0/PMD0 | bidirectional | PORTE digital I/O with ST input buffer, also parallel master port data PMD0. |
| 61 | RE1/PMD1 | bidirectional | PORTE digital I/O with ST input buffer, also parallel master port data PMD1. |
| 62 | RE2/PMD2 | bidirectional | PORTE digital I/O with ST input buffer, also parallel master port data PMD2. |
| 63 | RE3/PMD3 | bidirectional | PORTE digital I/O with ST input buffer, also parallel master port data PMD3. |
| 64 | RE4/PMD4 | bidirectional | PORTE digital I/O with ST input buffer, also parallel master port data PMD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (regulator enabled) | VDD | 2.2 | 3.6 | V | Regulator enabled | 313 | |
| Supply Voltage (regulator disabled) | VDD | 3.6 | V | Regulator disabled | 313 | ||
| Core Supply Voltage (regulator disabled) | VDDCORE | 2 | 2.75 | V | Regulator disabled | 313 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 313 | |||
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 0.05 | V/ms | 0-3.3V in 0.1s; 0-2.5V in 60 ms | 313 | ||
| Ambient temperature under bias | -40 | 100 | °C | 311 | |||
| Storage temperature | -65 | 150 | °C | 311 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 311 | ||
| Voltage on any digital only pin with respect to VSS | -0.3 | 6 | V | 311 | |||
| Voltage on VDDCORE with respect to VSS | VDDCORE | -0.3 | 3 | V | 311 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 312 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 312 | ||
| Output Low Voltage, I/O Ports | VOL | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 319 | ||
| Output Low Voltage, OSC2/CLKO | VOL | 0.4 | V | IOL = 8.5 mA, VDD = 3.6V | 319 | ||
| Output High Voltage, I/O Ports | VOH | 3 | V | IOH = -3.0 mA, VDD = 3.6V | 319 | ||
| Output High Voltage, I/O Ports | VOH | 2.4 | V | IOH = -6.0 mA, VDD = 3.6V | 319 | ||
| Output High Voltage, I/O Ports | VOH | 1.65 | V | IOH = -1.0 mA, VDD = 2.0V | 319 | ||
| Output High Voltage, I/O Ports | VOH | 1.4 | V | IOH = -3.0 mA, VDD = 2.0V | 319 | ||
| Output High Voltage, OSC2/CLKO | VOH | 2.4 | V | IOH = -6.0 mA, VDD = 3.6V | 319 | ||
| Output High Voltage, OSC2/CLKO | VOH | 1.4 | V | IOH = -3.0 mA, VDD = 2.0V | 319 | ||
| Cell Endurance | EP | 10000 | E/W | -40C to +85C | 319 | ||
| VDD for Read | VPR | 3.6 | V | VMIN = Minimum operating voltage | 319 | ||
| Supply Voltage for Self-Timed Writes | VDDCORE | 2.25 | 3.6 | V | 319 | ||
| Supply Voltage for Self-Timed Writes | VDD | 2.35 | 3.6 | V | 319 | ||
| Self-Timed Page Erase Time | TIE | 40 | ms | 319 | |||
| Characteristic Retention | TRETD | 20 | Year | Provided no other specifications are violated | 319 | ||
| Operating Current (IDD) | IDD | 0.83 | 1.2 | mA | -40°C, 2.0V, 1 MIPS | 314 | |
| Operating Current (IDD) | IDD | 1.1 | 1.7 | mA | -40°C, 3.3V, 1 MIPS | 314 | |
| Operating Current (IDD) | IDD | 18.2 | 24 | mA | -40°C, 2.5V, 16 MIPS | 314 | |
| Operating Current (IDD) | IDD | 15 | 54 | µA | -40°C, 2.0V, LPRC (31 kHz) | 314 | |
| Operating Current (IDD) | IDD | 20 | 69 | µA | +85°C, 2.0V, LPRC (31 kHz) | 314 | |
| Operating Current (IDD) | IDD | 57 | 96 | µA | -40°C, 3.3V, LPRC (31 kHz) | 314 | |
| Operating Current (IDD) | IDD | 95 | 145 | µA | +85°C, 3.3V, LPRC (31 kHz) | 314 | |
| Thermal Resistance, junction to ambient, 10x10x1 mm TQFP | θJA | 76.6 | °C/W | Junction to ambient, package simulation (Note 1) | 312 | ||
| Base Internal Regulator Voltage Brown-out Reset threshold, VDD high-to-low transition | VBOR | 2.05 | V | Voltage regulator enabled | 313 | ||
| Self-Timed Write Cycle Time | TIW | 3 | ms | 319 | |||
| Supply Current during Programming | IDDP | 7 | mA | 319 |
CAD (KiCad official)
- Symbol:
PIC24FJ128GB106T-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic24fj128gb106t-i-etched.step/pic24fj128gb106t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj128gb106t-i.step/pic24fj128gb106t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (352 pp, sha256
7d2ee89c95aba693, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).