component
TRS202EIPWR
Public Made by Adomby adom
Texas Instruments RS232 ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTRS202EIPWR
Texas Instruments · RS232 ICs · TSSOP-16
TRS202EIPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor, which connects between C1+ and C1- (0.1 µF or 1 µF per the datasheet). |
| 2 | V+ | power_out | Positive charge-pump output for the storage capacitor only; absolute maximum is VCC - 0.3 V to 14 V. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor, which connects between C1+ and C1-. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor, which connects between C2+ and C2-. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor, which connects between C2+ and C2-. |
| 6 | V- | power_out | Negative charge-pump output for the storage capacitor only; absolute range is -14 V to 0.3 V. |
| 7 | DOUT2 | output | RS-232 line data output to the remote RS-232 system; outputs are protected against shorts to ground and the pin is rated ±15 kV HBM and ±8 kV IEC 61000-4-2 contact ESD. |
| 8 | RIN2 | input | RS-232 line data input from the remote RS-232 system; it accepts up to ±30 V and decodes inputs as low as ±3 V. |
| 9 | ROUT2 | output | Logic data output to the UART; it is rated VOH of 3.5 V minimum and VOL of 0.4 V maximum. |
| 10 | DIN2 | input | Logic data input from the UART; it requires VIH of 2 V minimum and VIL of 0.8 V maximum, and must not be left floating because there is no internal pull-up. |
| 11 | DIN1 | input | Logic data input from the UART; it requires VIH of 2 V minimum and VIL of 0.8 V maximum, and must not be left floating because there is no internal pull-up. |
| 12 | ROUT1 | output | Logic data output to the UART; it is rated VOH of 3.5 V minimum and VOL of 0.4 V maximum. |
| 13 | RIN1 | input | RS-232 line data input from the remote RS-232 system; it accepts up to ±30 V and decodes inputs as low as ±3 V. |
| 14 | DOUT1 | output | RS-232 line data output to the remote RS-232 system; outputs are protected against shorts to ground and the pin is rated ±15 kV HBM and ±8 kV IEC 61000-4-2 contact ESD. |
| 15 | GND | power_in | Ground; the datasheet asks for the lowest possible impedance from this pin to the board ground plane for best ESD performance. |
| 16 | VCC | power_in | Supply voltage, which must be 4.5 V to 5.5 V (5 V nominal) and bypassed to ground with at least 0.1 µF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TRS202EIPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
trs202eipwr-etched.step/trs202eipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);trs202eipwr.step/trs202eipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
1780123e58555565, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).