component
GR8313FJG
Public Made by Adomby adom
Grenergy Battery Management ICs, DIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownGR8313FJG
Grenergy · Battery Management ICs · DIP-8
GR8313FJG from Grenergy, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGI | input | Power good input signal pin with thresholds 1.13-1.2V (PGI_2) for PGO delay and 1.3-1.37V (PGI_1) for UVP enable. |
| 2 | GND | power_in | Ground reference. |
| 3 | FPO/ | tri_state | Inverted fault protection output with open drain stage; VOL 0.35V maximum at 10mA sink, leakage 5µA at 5V. |
| 4 | PSON/ | input | Remote ON/OFF control input with 38mS debounce time; VIH 1.4-1.5V, VIL 1.0-1.1V. |
| 5 | VS33 | input | 3.3V supply monitor input; over-voltage threshold 3.7-4.1V, under-voltage threshold 2.0-2.4V. |
| 6 | VS5 | input | 5.0V supply monitor input; over-voltage threshold 5.7-6.5V, under-voltage threshold 3.3-3.7V. |
| 7 | VCC | power_in | Power supply input with recommended operating range 4.5-15V; typical supply current 3mA at VPSON/ = 5V. |
| 8 | PGO | tri_state | Power good output signal with open drain stage; VOL 0.35V maximum at 10mA sink, leakage 5µA at 5V, 125mS delay from PGI. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Grenergy |
| Package | DIP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
GR8313FJG - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
gr8313fjg-etched.step/gr8313fjg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gr8313fjg.step/gr8313fjg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Grenergy datasheet (10 pp, sha256
8d9e4643a7e4ed3e, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).