component
TP6003AX
Public Made by Adomby adom
Shenzhen JingYang Power Distribution Switches, SOT23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTP6003AX
Shenzhen JingYang · Power Distribution Switches · SOT23-5L
TP6003AX from Shenzhen JingYang, in a SOT23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Switch output voltage; the output can be forced higher than the input in the off state. |
| 2 | GND | power_in | Ground. |
| 3 | NC | unconnected | No connect; the datasheet gives no function for this pin. |
| 4 | EN | input | Chip enable, active-high; logic-low is 0.8 V max and logic-high is 2.0 V min for VIN of 2.5 V to 5.5 V, with an absolute maximum of -0.3 V to 6.0 V. |
| 5 | VIN | power_in | Power input voltage, 2.5 V to 5.5 V operating, 6.0 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen JingYang |
| Package | SOT23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TP6003AX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5L (KiCad packages3D, STEP)
- 3D model files:
tp6003ax-etched.step/tp6003ax-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp6003ax.step/tp6003ax.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen JingYang datasheet (10 pp, sha256
1b8fdd3d6dac5745, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).