Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SP3485CN-L

MaxLinear · RS-485 / RS-422 ICs · SOIC-8

SP3485CN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: with RE low it goes HIGH for A-B at or above +0.2 V, LOW for A-B at or below -0.2 V, and HIGH for open inputs (fail-safe), and it is tri-stated when RE is high.
2 RE input Receiver output enable, active LOW: a logic LOW enables RO and a logic HIGH disables the receiver output; input levels are VIH 2.0 V minimum and VIL 0.8 V maximum.
3 DE input Driver output enable, active HIGH: a logic HIGH enables the differential driver outputs and a logic LOW tri-states them; input levels are VIH 2.0 V minimum and VIL 0.8 V maximum.
4 DI input Driver input: with DE high, DI high drives A high and B low and DI low drives A low and B high; input levels are VIH 2.0 V minimum and VIL 0.8 V maximum.
5 GND power_in Ground connection for the device.
6 A bidirectional Non-inverting driver output and receiver input; the bus common-mode range is -7 V to +12 V and the receiver input resistance is 12 kΩ minimum.
7 B bidirectional Inverting driver output and receiver input; the bus common-mode range is -7 V to +12 V and the receiver input resistance is 12 kΩ minimum.
8 VCC power_in Positive supply, specified at +3.3 V ±5% (absolute maximum +6.0 V).

Key specifications

Parameter Value
Manufacturer MaxLinear
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VCC) absolute maximum VCC 6 V 2
Logic input voltage (absolute maximum) -0.3 6 V Input Voltages - Logic 2
Driver input voltage (absolute maximum) -0.3 6 V Input Voltages - Drivers 2
Receiver input voltage (absolute maximum) -15 15 V Input Voltages - Receivers, printed as +/-15V 2
Driver output voltage (absolute maximum) -15 15 V Output Voltages - Drivers, printed as +/-15V 2
Receiver output voltage (absolute maximum) -0.3 6 V Output Voltages - Receivers 2
Storage temperature -65 150 °C 2
Supply voltage tolerance VCC -5 5 % VCC = +3.3V +/-5%; TAMB = TMIN to TMAX unless otherwise noted 2
Ambient operating temperature range (SP3485CN-L) TAMB 0 70 °C Ordering information for SP3485CN-L (0°C to +70°C) 9
Input high voltage VIH 2 V Applies to DE, DI, RE 2
Input low voltage VIL 0.8 V Applies to DE, DI, RE 2
Input current -10 10 µA Applies to DE, DI, RE 2
Differential output voltage with load (RS-422) VOD 2 Vcc Volts With Load; R = 50Ω (RS-422); Figure 1 2
Differential output voltage with load (RS-485) VOD 1.5 Vcc Volts With Load; R = 27Ω (RS-485); Figure 1 2
Change in magnitude of driver differential output voltage for complementary states ΔVOD 0.2 V R = 27Ω or R = 50Ω; Figure 1 2
Driver common mode output voltage VOC 3 V R = 27Ω or R = 50Ω; Figure 1 2
Driver short circuit current, VOUT = HIGH IOS -250 250 mA -7V ≤ VO ≤ +12V; Figure 8 2
Driver short circuit current, VOUT = LOW IOS -250 250 mA -7V ≤ VO ≤ +12V; Figure 8 2
Driver input to output propagation delay, tPLH tPLH 20 40 60 ns Figures 2 & 9 2
Driver input to output propagation delay, tPHL tPHL 20 40 60 ns Figures 2 & 9 2
Differential driver skew /tDO1 - tDO2/ 2 10 ns Figures 2 and 10 2
Driver rise or fall time 5 20 ns From 10%-90%; Figures 3 and 10 2
Driver enable to output high 52 120 ns Figures 4 and 11 3
Driver enable to output low 60 120 ns Figures 5 and 11 3
Driver disable time from low 40 120 ns Figures 5 and 11 3
Driver disable time from high 60 120 ns Figures 4 and 11 3
Differential input threshold VTH -0.2 0.2 V -7V ≤ VCM ≤ +12V 3
Output voltage LOW VOL 0.4 V VID = -200mV, 2.5mA 3
Three-state (high impedance) output current IOZR -1 1 µA 0V ≤ VO ≤ VCC; RE = VCC 3
Input resistance RIN 12 15 kΩ -7V ≤ VCM ≤ +12V 3
Input current (A, B), VIN = 12V IIN 1 mA DE = 0V, VCC = 0V or 3.6V, VIN = 12V 3
Input current (A, B), VIN = -7V IIN -0.8 mA DE = 0V, VCC = 0V or 3.6V, VIN = -7V 3
Short circuit current IOS 7 60 mA 0V ≤ VCM ≤ VCC 3
Receiver input to output propagation delay, tPLH tPLH 40 70 100 ns Figures 6 and 12 3
Receiver input to output propagation delay, tPHL tPHL 40 70 100 ns Figures 6 and 12 3
Differential receiver skew tRSKEW 4 ns tRSKEW = /tRPHL - tRPLH/, Figures 6 and 12 3
Receiver enable to output low 35 60 ns Figures 7 and 13, S1 closed, S2 open 3
Receiver enable to output high 35 60 ns Figures 7 and 13, S2 closed, S1 open 3
Receiver disable from low 35 60 ns Figures 7 and 13, S1 closed, S2 open 3
Receiver disable from high 35 60 ns Figures 7 and 13, S2 closed, S1 open 3
Supply current, no load (driver enabled) ICC 1000 2000 µA RE, DI = 0V or VCC; DE = VCC 3
Supply current, no load (driver disabled) ICC 800 1500 µA RE = 0V, DI = 0V or VCC, DE = 0V 3

CAD (KiCad official)

  • Symbol: SP3485CN-L
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sp3485cn-l-etched.step / sp3485cn-l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sp3485cn-l.step / sp3485cn-l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (9 pp, sha256 b01eb091aab969e3, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF