component
LM10011SDX
Public Made by Adomby adom
Texas Instruments Power Management - Specialized, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM10011SDX
Texas Instruments · Power Management - Specialized · WSON-10-EP(3x3)
LM10011SDX from Texas Instruments, in a WSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the device. |
| 2 | IDAC_OUT | output | Output of the current DAC that connects to the regulator feedback node; the allowed voltage range is -0.3 V to VDD - 1.75 V. |
| 3 | VDD | power_in | Positive supply input with an operating range of 2.97 V to 5.5 V; a bypass capacitor of 1 nF or greater from this pin to GND is recommended. |
| 4 | EN | input | Precision enable input; the device operates when EN exceeds 1.34 V, with 100 mV of hysteresis, and the input range is -0.3 V to 5.5 V. |
| 5 | MODE | input | Selects the VID interface: connect to VDD for 4-bit parallel mode or to GND for the 4-pin 6-bit interface; the input range is -0.3 V to 5.5 V. |
| 6 | SET | passive | A resistor from SET to GND sets the start-up code (current) at IDAC_OUT, with 16 start-up codes available. |
| 7 | VIDA | input | VID digital data input: bit 0 in 6-bit mode (latched when VIDS transitions low) or bit 0 in 4-bit mode; the input range is -0.3 V to 5.5 V. |
| 8 | VIDB | input | VID digital data input: bit 1 in 6-bit mode (latched when VIDS transitions low) or bit 1 in 4-bit mode; the input range is -0.3 V to 5.5 V. |
| 9 | VIDC | input | VID digital data input: bit 2 in 6-bit mode (latched when VIDS transitions low) or bit 2 in 4-bit mode; the input range is -0.3 V to 5.5 V. |
| 10 | VIDS | input | VID select/strobe: in 6-bit mode it selects the lower 3 bits (low) or upper 3 bits (high) and updates IDAC_OUT; in 4-bit mode it is data bit 3. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
LM10011SDX - Footprint:
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm - 3D model: WSON-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lm10011sdx-etched.step/lm10011sdx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm10011sdx.step/lm10011sdx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
7a7d8ba40d08deda, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).