component
DRV2700RGPT
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, QFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDRV2700RGPT
Texas Instruments · Power Distribution Switches · QFN-20-EP(4x4)
DRV2700RGPT from Texas Instruments, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PUMP | power_out | Internal charge-pump voltage output. |
| 2 | VDD | power_in | Power supply, connected to the battery; recommended operating range is 3.3 V to 5.5 V. |
| 3 | FB | input | Boost feedback input; the boost output voltage is set by two external resistors R(FB1) and R(FB2) connected to this pin. |
| 4 | GND | power_in | Ground. |
| 5 | GND | power_in | Ground. |
| 6 | GND | power_in | Ground. |
| 7 | SW | power_out | Internal boost switch pin; the boost/output voltage absolute maximum on SW is 120 V. |
| 8 | SW | power_out | Internal boost switch pin; the boost/output voltage absolute maximum on SW is 120 V. |
| 9 | NC | unconnected | No internal connection. |
| 10 | BST | power_out | Boost output voltage; recommended boost voltage range is 15 V to 105 V. |
| 11 | BST | power_out | Boost output voltage; recommended boost voltage range is 15 V to 105 V. |
| 12 | PVDD | power_in | Amplifier supply voltage; the boost/output voltage absolute maximum on PVDD is 120 V. |
| 13 | OUT+ | output | Noninverting amplifier output; the boost/output voltage absolute maximum is 120 V. |
| 14 | OUT- | output | Inverting amplifier output; the boost/output voltage absolute maximum is 120 V. |
| 15 | REXT | input | Resistor to ground that sets the boost current limit; the recommended resistor range is 6 kΩ to 35 kΩ. |
| 16 | IN- | input | Inverting amplifier input; the recommended differential input voltage is 1.8 V. |
| 17 | IN+ | input | Noninverting amplifier input; the recommended differential input voltage is 1.8 V. |
| 18 | GAIN0 | input | Gain programming pin, least significant bit; digital input with VIL maximum 0.75 V and VIH minimum 1.4 V at VDD = 3.6 V. |
| 19 | GAIN1 | input | Gain programming pin, most significant bit; digital input with VIL maximum 0.75 V and VIH minimum 1.4 V at VDD = 3.6 V. |
| 20 | EN | input | Chip enable input; digital input with VIL maximum 0.75 V and VIH minimum 1.4 V at VDD = 3.6 V. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | QFN-20-EP(4x4) |
| Category | Power Management (PMIC) |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
DRV2700RGPT - Footprint:
Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm - 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
drv2700rgpt-etched.step/drv2700rgpt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);drv2700rgpt.step/drv2700rgpt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
05241d239a52b292, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).