component
STM32H742VGT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32H742VGT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32H742VGT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TRACECLK, SPI4_SCK, SAI1_MCLK_A and FMC_A23. |
| 2 | PE3 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B and FMC_A19. |
| 3 | PE4 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TRACED1, SPI4_NSS, DCMI_D4 and FMC_A20. |
| 4 | PE5 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TRACED2, TIM15_CH1, SPI4_MISO and FMC_A21. |
| 5 | PE6 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TRACED3, TIM1_BKIN2, SPI4_MOSI and FMC_A22. |
| 6 | VBAT | power_in | Battery supply pin for the VBAT operating mode, which supports battery charging. |
| 7 | PC13 | bidirectional | 5 V tolerant I/O (FT) with RTC_TAMP1/RTC_TS and WKUP2 as additional functions; its output limits are given separately from other I/Os in the datasheet. |
| 8 | PC14-OSC32_IN | bidirectional | 5 V tolerant I/O (FT) that is OSC32_IN when configured as the low-speed oscillator, a function kept during and after reset except power-on reset. |
| 9 | PC15-OSC32_OUT | bidirectional | 5 V tolerant I/O (FT) that is OSC32_OUT when configured as the low-speed oscillator, a function kept during and after reset except power-on reset. |
| 10 | VSS | power_in | Ground pin that must be connected to the external ground. |
| 11 | VDD | power_in | Main supply pin; standard operating voltage is 1.62 to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | 5 V tolerant I/O (FT) that serves as the OSC_IN oscillator input as an additional function. |
| 13 | PH1-OSC_OUT | bidirectional | 5 V tolerant I/O (FT) that serves as the OSC_OUT oscillator output as an additional function. |
| 14 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V tolerant I/O with analog option supplied by VDDA (FT_a); ADC123_INP10 is an additional analog function. |
| 16 | PC1 | bidirectional | 5 V tolerant high-speed low-voltage I/O with analog option (FT_ha); ADC123_INN10, ADC123_INP11 and RTC_TAMP3/WKUP5 are additional functions. |
| 17 | PC2_C | passive | Analog-capable pad (TT_a) that is a separate pad from PC2 unless the SYSCFG analog switch is closed; ADC3_INN1 and ADC3_INP0 are additional functions. |
| 18 | PC3_C | passive | Analog-capable pad (TT_a) that is a separate pad from PC3 unless the SYSCFG analog switch is closed; ADC3_INP1 is an additional function. |
| 19 | VSSA | power_in | Analog ground pin for the analog domain. |
| 20 | VREF+ | power_in | Positive voltage reference input for analog peripherals. |
| 21 | VDDA | power_in | Analog supply: 1.62 to 3.6 V when ADC or COMP is used, with minimums of 1.8 V for DAC or VREFBUF and 2.0 V for OPAMP. |
| 22 | PA0 | bidirectional | 5 V tolerant I/O with analog option (FT_a); WKUP0 and ADC1_INP16 are additional functions and alternate functions include TIM2_CH1/TIM2_ETR and USART2_CTS. |
| 23 | PA1 | bidirectional | 5 V tolerant high-speed low-voltage I/O with analog option (FT_ha); ADC1_INN16 and ADC1_INP17 are additional functions and alternate functions include TIM2_CH2 and USART2_RTS/USART2_DE. |
| 24 | PA2 | bidirectional | 5 V tolerant I/O with analog option (FT_a); WKUP1 and ADC12_INP14 are additional functions and alternate functions include TIM2_CH3 and ETH_MDIO. |
| 25 | PA3 | bidirectional | 5 V tolerant high-speed low-voltage I/O with analog option (FT_ha); ADC12_INP15 is an additional function and alternate functions include TIM2_CH4 and USART2_RX. |
| 26 | VSS | power_in | Ground pin that must be connected to the external ground. |
| 27 | VDD | power_in | Main supply pin; standard operating voltage is 1.62 to 3.6 V. |
| 28 | PA4 | bidirectional | 3.3 V tolerant I/O with analog option (TT_a); ADC12_INP18 and DAC1_OUT1 are additional functions, and the injected current is limited to -0/0 mA (Table 22). |
| 29 | PA5 | bidirectional | 3.3 V tolerant high-speed low-voltage I/O with analog option (TT_ha); ADC12_INN18, ADC12_INP19 and DAC1_OUT2 are additional functions, and the injected current is limited to -0/0 mA (Table 22). |
| 30 | PA6 | bidirectional | 5 V tolerant I/O with analog option (FT_a); ADC12_INP3 is an additional function and alternate functions include TIM1_BKIN and SPI1_MISO/I2S1_SDI. |
| 31 | PA7 | bidirectional | 3.3 V tolerant I/O with analog option (TT_a); ADC12_INN3, ADC12_INP7 and OPAMP1_VINM are additional functions. |
| 32 | PC4 | bidirectional | 3.3 V tolerant I/O with analog option (TT_a); ADC12_INP4, OPAMP1_VOUT and COMP1_INM are additional functions. |
| 33 | PC5 | bidirectional | 3.3 V tolerant I/O with analog option (TT_a); ADC12_INN4, ADC12_INP8 and OPAMP1_VINM are additional functions. |
| 34 | PB0 | bidirectional | 5 V tolerant I/O with analog option (FT_a); ADC12_INN5, ADC12_INP9, OPAMP1_VINP and COMP1_INP are additional functions. |
| 35 | PB1 | bidirectional | 3.3 V tolerant I/O with USB option (TT_u, supplied by VDD33USB); ADC12_INP5 and COMP1_INM are additional functions. |
| 36 | PB2 | bidirectional | 5 V tolerant high-speed low-voltage I/O with analog option (FT_ha); COMP1_INP is an additional function and alternate functions include RTC_OUT and SAI1_D1. |
| 37 | PE7 | bidirectional | 3.3 V tolerant high-speed low-voltage I/O with analog option (TT_ha); OPAMP2_VOUT and COMP2_INM are additional functions and alternate functions include TIM1_ETR and FMC_D4. |
| 38 | PE8 | bidirectional | 3.3 V tolerant high-speed low-voltage I/O with analog option (TT_ha); OPAMP2_VINM is an additional function and alternate functions include TIM1_CH1N and COMP2_OUT. |
| 39 | PE9 | bidirectional | 3.3 V tolerant high-speed low-voltage I/O with analog option (TT_ha); OPAMP2_VINP and COMP2_INP are additional functions and alternate functions include TIM1_CH1 and FMC_D6. |
| 40 | PE10 | bidirectional | 5 V tolerant high-speed low-voltage I/O with analog option (FT_ha); COMP2_INM is an additional function and alternate functions include TIM1_CH2N and FMC_D7. |
| 41 | PE11 | bidirectional | 5 V tolerant high-speed low-voltage I/O with analog option (FT_ha); COMP2_INP is an additional function and alternate functions include TIM1_CH2 and FMC_D8. |
| 42 | PE12 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TIM1_CH3N, SPI4_SCK, FMC_D9 and COMP1_OUT. |
| 43 | PE13 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TIM1_CH3, SPI4_MISO, FMC_D10 and COMP2_OUT. |
| 44 | PE14 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B and FMC_D11. |
| 45 | PE15 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TIM1_BKIN, FMC_D12 and TIM1_BKIN_COMP12/COMP_TIM1_BKIN. |
| 46 | PB10 | bidirectional | 5 V tolerant I/O with I2C FM+ option (FT_f); alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK and USART3_TX. |
| 47 | PB11 | bidirectional | 5 V tolerant I/O with I2C FM+ option (FT_f); alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX and ETH_MII_TX_EN. |
| 48 | VCAP | power_in | Connection for the external VCAP capacitor (CEXT 2.2 µF, ESR < 100 mΩ) that stabilizes the main regulator. |
| 49 | VSS | power_in | Ground pin that must be connected to the external ground. |
| 50 | VDD | power_in | Main supply pin; standard operating voltage is 1.62 to 3.6 V. |
| 51 | PB12 | bidirectional | 5 V tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_BKIN, SPI2_NSS/I2S2_WS, USART3_CK and OTG_HS_ID. |
| 52 | PB13 | bidirectional | 5 V tolerant I/O with USB option (FT_u, supplied by VDD33USB); OTG_HS_VBUS is an additional function and alternate functions include TIM1_CH1N, SPI2_SCK/I2S2_CK and USART3_CTS. |
| 53 | PB14 | bidirectional | 5 V tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI and OTG_HS_DM. |
| 54 | PB15 | bidirectional | 5 V tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include RTC_REFIN, TIM1_CH3N, USART1_RX and OTG_HS_DP. |
| 55 | PD8 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include DFSDM1_CKIN3, SAI3_SCK_B, USART3_TX and FMC_D13. |
| 56 | PD9 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include DFSDM1_DATIN3, SAI3_SD_B, USART3_RX and FMC_D14. |
| 57 | PD10 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include DFSDM1_CKOUT, SAI3_FS_B, USART3_CK and FMC_D15. |
| 58 | PD11 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include LPTIM2_IN2, I2C4_SMBA, QUADSPI_BK1_IO0 and FMC_A16. |
| 59 | PD12 | bidirectional | 5 V tolerant high-speed low-voltage I/O with I2C FM+ option (FT_fh); alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL and FMC_A17. |
| 60 | PD13 | bidirectional | 5 V tolerant high-speed low-voltage I/O with I2C FM+ option (FT_fh); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA and FMC_A18. |
| 61 | PD14 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TIM4_CH3, UART8_CTS, FMC_D0 and SAI3_MCLK_B. |
| 62 | PD15 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TIM4_CH4, UART8_RTS/UART8_DE and FMC_D1. |
| 63 | PC6 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include HRTIM_CHA1, TIM3_CH1, TIM8_CH1 and USART6_TX, with SWPMI_IO as an additional function. |
| 64 | PC7 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TRGIO, TIM3_CH2, TIM8_CH2 and USART6_RX. |
| 65 | PC8 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TRACED1, TIM3_CH3, TIM8_CH3 and USART6_CK. |
| 66 | PC9 | bidirectional | 5 V tolerant high-speed low-voltage I/O with I2C FM+ option (FT_fh); alternate functions include MCO2, TIM3_CH4, TIM8_CH4 and I2C3_SDA. |
| 67 | PA8 | bidirectional | 5 V tolerant high-speed low-voltage I/O with I2C FM+ and analog options (FT_fha); alternate functions include MCO1, TIM1_CH1, USART1_CK and OTG_FS_SOF. |
| 68 | PA9 | bidirectional | 5 V tolerant I/O with USB option (FT_u, supplied by VDD33USB); OTG_FS_VBUS is an additional function and alternate functions include TIM1_CH2, USART1_TX and FDCAN1_RXFD_MODE. |
| 69 | PA10 | bidirectional | 5 V tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_CH3, LPUART1_RX, USART1_RX and OTG_FS_ID. |
| 70 | PA11 | bidirectional | 5 V tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_CH4, LPUART1_CTS, FDCAN1_RX and OTG_FS_DM. |
| 71 | PA12 | bidirectional | 5 V tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_ETR, LPUART1_RTS/LPUART1_DE, FDCAN1_TX and OTG_FS_DP. |
| 72 | PA13 | bidirectional | 5 V tolerant I/O (FT) whose function after reset is JTMS/SWDIO. |
| 73 | VCAP | power_in | Connection for the second external VCAP capacitor (CEXT 2.2 µF, ESR < 100 mΩ) that stabilizes the main regulator. |
| 74 | VSS | power_in | Ground pin that must be connected to the external ground. |
| 75 | VDD | power_in | Main supply pin; standard operating voltage is 1.62 to 3.6 V. |
| 76 | PA14 | bidirectional | 5 V tolerant I/O (FT) whose function after reset is JTCK/SWCLK. |
| 77 | PA15 | bidirectional | 5 V tolerant I/O (FT) whose function after reset is JTDI; alternate functions include TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS and UART4_RTS/UART4_DE. |
| 78 | PC10 | bidirectional | 5 V tolerant high-speed low-voltage I/O with analog option (FT_ha); alternate functions include HRTIM_EEV1, SPI3_SCK/I2S3_CK, USART3_TX and SDMMC1_D2. |
| 79 | PC11 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include HRTIM_FLT2, SPI3_MISO/I2S3_SDI, USART3_RX and SDMMC1_D3. |
| 80 | PC12 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TRACED3, HRTIM_EEV2, SPI3_MOSI/I2S3_SDO and SDMMC1_CK. |
| 81 | PD0 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include DFSDM1_CKIN6, SAI3_SCK_A, FDCAN1_RX and FMC_D2. |
| 82 | PD1 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include DFSDM1_DATIN6, SAI3_SD_A, FDCAN1_TX and FMC_D3. |
| 83 | PD2 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include TRACED2, TIM3_ETR, UART5_RX and SDMMC1_CMD. |
| 84 | PD3 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS and FMC_CLK. |
| 85 | PD4 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include HRTIM_FLT3, SAI3_FS_A, USART2_RTS/USART2_DE and FMC_NOE. |
| 86 | PD5 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include HRTIM_EEV3, USART2_TX, FDCAN1_TXFD_MODE and FMC_NWE. |
| 87 | PD6 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include SAI1_D1, USART2_RX, SDMMC2_CK and FMC_NWAIT. |
| 88 | PD7 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK and FMC_NE1. |
| 89 | PB3 | bidirectional | 5 V tolerant I/O (FT) whose function after reset is JTDO/TRACESWO; alternate functions include TIM2_CH2, SPI1_SCK/I2S1_CK and SDMMC2_D2. |
| 90 | PB4 | bidirectional | 5 V tolerant I/O (FT) whose function after reset is NJTRST; alternate functions include TIM16_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI and SDMMC2_D3. |
| 91 | PB5 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM17_BKIN, TIM3_CH2, SPI1_MOSI/I2S1_SDO, FDCAN2_RX and FMC_SDCKE1. |
| 92 | PB6 | bidirectional | 5 V tolerant I/O with I2C FM+ option (FT_f); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, USART1_TX and FMC_SDNE1. |
| 93 | PB7 | bidirectional | 5 V tolerant I/O with I2C FM+ and analog options (FT_fa); PVD_IN is an additional function and alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA and USART1_RX. |
| 94 | BOOT0 | input | Dedicated BOOT0 input pin whose input voltage is limited to 0 to 9 V (Table 24); VPP is listed as its additional function. |
| 95 | PB8 | bidirectional | 5 V tolerant high-speed low-voltage I/O with I2C FM+ option (FT_fh); alternate functions include TIM16_CH1, I2C1_SCL, FDCAN1_RX and DCMI_D6. |
| 96 | PB9 | bidirectional | 5 V tolerant high-speed low-voltage I/O with I2C FM+ option (FT_fh); alternate functions include TIM17_CH1, I2C1_SDA, FDCAN1_TX and SDMMC1_CDIR. |
| 97 | PE0 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include LPTIM1_ETR, TIM4_ETR, UART8_RX and DCMI_D2. |
| 98 | PE1 | bidirectional | 5 V tolerant high-speed low-voltage I/O (FT_h); alternate functions include LPTIM1_IN2, UART8_TX, FDCAN1_TXFD_MODE and DCMI_D3. |
| 99 | VSS | power_in | Ground pin that must be connected to the external ground. |
| 100 | VDD | power_in | Main supply pin; standard operating voltage is 1.62 to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
STM32H742VGT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32h742vgt6-etched.step/stm32h742vgt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32h742vgt6.step/stm32h742vgt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (357 pp, sha256
9c74d2015445f7c3, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).