3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC32MM0016GPL028-E
Microchip Tech · Pre-ordered MCUs · SSOP-28-208mil
PIC32MM0016GPL028-E from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear input; pulling it low generates a device Reset and it is also used for programming and debugging (Schmitt-trigger buffer). |
| 2 | VREF+/AN0/RP1/OCM1E/INT3/RA0 | power_in | ADC and DAC positive reference input (VREF+) multiplexed with ADC channel AN0, remappable RP1, MCCP1 output E, external interrupt INT3, and PORTA digital I/O RA0. |
| 3 | VREF-/AN1/RP2/OCM1F/RA1 | power_in | ADC negative reference input (VREF-) multiplexed with ADC channel AN1, remappable RP2, MCCP1 output F, and PORTA digital I/O RA1. |
| 4 | PGED1/AN2/C1IND/C2INB/RP14/RB0 | bidirectional | ICSP Port 1 programming data (PGED1) multiplexed with ADC channel AN2, comparator inputs C1IND and C2INB, remappable RP14, and PORTB digital I/O RB0. |
| 5 | PGEC1/AN3/C1INC/C2INA/RP15/RB1 | bidirectional | ICSP Port 1 programming clock input (PGEC1) multiplexed with ADC channel AN3, comparator inputs C1INC and C2INA, remappable RP15, and PORTB digital I/O RB1. |
| 6 | AN4/C1INB/RP16/RB2 | bidirectional | ADC channel AN4 multiplexed with comparator 1 input B, remappable RP16, and PORTB digital I/O RB2. |
| 7 | AN11/C1INA/RB3 | bidirectional | ADC channel AN11 multiplexed with comparator 1 input A and PORTB digital I/O RB3. |
| 8 | VSS | power_in | Digital modules ground; VSS and AVSS are internally connected. |
| 9 | OSC1/CLKI/AN5/RP3/OCM1C/RA2 | bidirectional | Primary oscillator crystal input or external clock input (CLKI, EC mode) multiplexed with ADC channel AN5, remappable RP3, MCCP1 output C, and PORTA digital I/O RA2. |
| 10 | OSC2/CLKO/AN6/RP4/OCM1D/RA3(1) | bidirectional | Primary oscillator crystal output or system clock output (CLKO) multiplexed with ADC channel AN6, remappable RP4, MCCP1 output D, and PORTA digital I/O RA3; pin has increased current drive strength. |
| 11 | SOSCI/RP5/RB4 | bidirectional | Secondary oscillator crystal input multiplexed with remappable RP5 and PORTB digital I/O RB4. |
| 12 | SOSCO/SCLKI/RP6/PWRLCLK/RA4 | bidirectional | Secondary oscillator crystal output or secondary oscillator external clock input (SCLKI) multiplexed with remappable RP6, the real-time clock 50/60 Hz clock input PWRLCLK, and PORTA digital I/O RA4. |
| 13 | VDD | power_in | Digital modules power supply; VDD and AVDD are internally connected. |
| 14 | PGED3/RB5 | bidirectional | ICSP Port 3 programming data (PGED3) multiplexed with PORTB digital I/O RB5. |
| 15 | PGEC3/RB6 | bidirectional | ICSP Port 3 programming clock input (PGEC3) multiplexed with PORTB digital I/O RB6. |
| 16 | RP11/RB7 | bidirectional | Remappable peripheral pin RP11 multiplexed with PORTB digital I/O RB7. |
| 17 | TCK/RP7/U1CTS/SCK1/OCM1A/RB8(1) | bidirectional | JTAG clock input (TCK) multiplexed with remappable RP7, UART1 clear-to-send input, SPI1 clock, MCCP1 output A, and PORTB digital I/O RB8; pin has increased current drive strength. |
| 18 | TMS/REFCLKI/RP8/T1CK/T1G/U1RTS/U1BCLK/SDO1/C2OUT/OCM1B/INT2/RB9(1) | bidirectional | JTAG mode select input (TMS) multiplexed with reference clock input, remappable RP8, Timer1 clock and gate inputs, UART1 functions, SPI1 data output, comparator 2 output, MCCP1 output B, external interrupt INT2, and PORTB digital I/O RB9; pin has increased current drive strength. |
| 19 | RP19/RC9 | bidirectional | Remappable peripheral pin RP19 multiplexed with PORTC digital I/O RC9. |
| 20 | VCAP | passive | Core voltage regulator filter capacitor connection; a low-ESR 10 µF capacitor to ground is required, and VCAP must not be connected to VDD. |
| 21 | PGED2/TDO/RP17/RB10 | bidirectional | ICSP Port 2 programming data (PGED2) multiplexed with JTAG data output TDO, remappable RP17, and PORTB digital I/O RB10. |
| 22 | PGEC2/TDI/RP18/RB11 | bidirectional | ICSP Port 2 programming clock input (PGEC2) multiplexed with JTAG data input TDI, remappable RP18, and PORTB digital I/O RB11. |
| 23 | AN7/LVDIN/RP12/RB12 | bidirectional | ADC channel AN7 multiplexed with High/Low-Voltage Detect input LVDIN, remappable RP12, and PORTB digital I/O RB12. |
| 24 | AN8/RP13/RB13 | bidirectional | ADC channel AN8 multiplexed with remappable RP13 and PORTB digital I/O RB13. |
| 25 | CDAC1/AN9/RP9/RTCC/U1TX/SDI1/C1OUT/INT1/RB14 | bidirectional | Control DAC output CDAC1 multiplexed with ADC channel AN9, remappable RP9, RTCC alarm output, UART1 transmit, SPI1 data input, comparator 1 output, external interrupt INT1, and PORTB digital I/O RB14. |
| 26 | AN10/REFCLKO/RP10/U1RX/SS1/FSYNC1/INT0/RB15(1) | bidirectional | ADC channel AN10 multiplexed with reference clock output, remappable RP10, UART1 receive, SPI1 slave select, SPI1 frame sync, external interrupt INT0, and PORTB digital I/O RB15; pin has increased current drive strength. |
| 27 | VSS/AVSS | power_in | Digital and analog modules ground; VSS and AVSS are internally connected. |
| 28 | VDD/AVDD | power_in | Digital and analog modules power supply; VDD and AVDD are internally connected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 207 | |||
| Storage temperature | -65 | 150 | °C | 207 | |||
| Voltage on VDD with respect to VSS | -0.3 | 4 | V | 207 | |||
| Voltage on any general purpose digital or analog pin (not 5.5V tolerant) with respect to VSS | -0.3 | V | max is VDD + 0.3V as printed | 207 | |||
| Voltage on 5.5V tolerant pin with respect to VSS, VDD = 0V | -0.3 | 4 | V | When VDD = 0V | 207 | ||
| Voltage on 5.5V tolerant pin with respect to VSS, VDD 2.0V | -0.3 | 6 | V | When VDD 2.0V | 207 | ||
| Maximum current out of VSS pin | 100 | mA | 207 | ||||
| Maximum output current sunk by I/O pin | 11 | mA | 207 | ||||
| Operating Junction Temperature Range | TJ | -40 | 100 | °C | 85°C rated parts | 208 | |
| Operating Junction Temperature Range | TJ | -40 | 140 | °C | 125°C rated parts | 208 | |
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 85°C rated parts | 208 | |
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 125°C rated parts | 208 | |
| Package thermal resistance, 28-Pin SSOP | JA | 71 | °C/W | Junction to ambient, package simulation | 209 | ||
| VDD Supply Voltage | VDD | 2 | 3.6 | V | BOR disabled | 209 | |
| VDD Supply Voltage with BOR enabled | VBOR | 3.6 | V | BOR enabled | 209 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | 0-3.3V in 66 ms, 0-2.0V in 40 ms | 209 | ||
| Brown-out Reset Voltage on VDD transition, high-to-low | VBOR | 1.94 | 2.22 | V | 209 | ||
| Operating Current | IDD | 0.45 | 0.65 | mA | VDD 2.0V; FSYS = 1 MHz | 210 | |
| Operating Current | IDD | 2.5 | 3.5 | mA | VDD 2.0V; FSYS = 8 MHz | 210 | |
| Operating Current | IDD | 7 | 9.2 | mA | VDD 2.0V; FSYS = 25 MHz | 210 | |
| Operating Current | IDD | 0.26 | 0.35 | mA | VDD 2.0V; FSYS = 32 kHz | 210 | |
| Operating Current at +125°C | IDD | 0.7 | 0.9 | mA | VDD 3.3V; FSYS = 32 kHz, +125°C | 210 | |
| Idle Current | IIDLE | 0.26 | 0.46 | mA | VDD 2.0V; FSYS = 1 MHz | 211 | |
| Idle Current | IIDLE | 0.85 | 1.5 | mA | VDD 2.0V; FSYS = 8 MHz | 211 | |
| Idle Current | IIDLE | 2.3 | 3.7 | mA | VDD 2.0V; FSYS = 25 MHz | 211 | |
| Idle Current | IIDLE | 0.18 | 0.34 | mA | VDD 2.0V; FSYS = 32 kHz | 211 | |
| Input Leakage Current, I/O pins 5V tolerant | IIL | 0.1 | 1 | µA | VPIN = 3.3V, VDD = 3.3V, pin at high-impedance | 214 | |
| Input Leakage Current, I/O pins not 5V tolerant | IIL | 0.1 | 1 | µA | VPIN = 3.3V, VDD = 3.3V, pin at high-impedance | 214 | |
| Input Leakage Current, MCLR | IIL | 0.1 | 1 | µA | VPIN = 3.3V, VDD = 3.3V | 214 | |
| Input Leakage Current, OSC1/CLKI | IIL | 0.1 | 1 | µA | VPIN = 3.3V, VDD = 3.3V | 214 | |
| Output Low Voltage, I/O ports | VOL | 0.36 | V | IOL = 6.0 mA, VDD = 3.6V | 216 | ||
| Output Low Voltage, I/O ports | VOL | 0.21 | V | IOL = 3.0 mA, VDD = 2V | 216 | ||
| Output Low Voltage, RA3, RB8, RB9 and RB15 I/O ports | VOL | 0.16 | V | IOL = 6.0 mA, VDD = 3.6V | 216 | ||
| Output Low Voltage, RA3, RB8, RB9 and RB15 I/O ports | VOL | 0.12 | V | IOL = 3.0 mA, VDD = 2V | 216 | ||
| Output High Voltage, I/O ports | VOH | 3.25 | V | IOH = -6.0 mA, VDD = 3.6V | 216 | ||
| Output High Voltage, I/O ports | VOH | 1.4 | V | IOH = -3.0 mA, VDD = 2V | 216 | ||
| Output High Voltage, RA3, RB8, RB9 and RB15 I/O ports | VOH | 3.3 | V | IOH = -6.0 mA, VDD = 3.6V | 216 | ||
| Output High Voltage, RA3, RB8, RB9 and RB15 I/O ports | VOH | 1.55 | V | IOH = -3.0 mA, VDD = 2V | 216 | ||
| Cell Endurance | EP | 10000 | 20000 | E/W | 216 | ||
| VDD for In-Circuit Serial Programming | VICSP | 3.6 | V | 216 | |||
| VDD for Run-Time Self-Programming | VRTSP | 2 | 3.6 | V | 216 | ||
| Characteristic Retention | TRETD | 20 | Year | If no other specifications are violated | 216 | ||
| Total Input Injection Current (sum of all I/O and control pins) | IICT | -20 | 20 | mA | Absolute instantaneous sum of all input injection currents from all I/O pins | 215 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | 01101 = Time base is synchronized to the INT4 pin (remappable) | 102 |
CAD (KiCad official)
- Symbol:
PIC32MM0016GPL028-E - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic32mm0016gpl028-e-etched.step/pic32mm0016gpl028-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mm0016gpl028-e.step/pic32mm0016gpl028-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (270 pp, sha256
2acc0dacc6349e28, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).