Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32L4R7VIT6

STMicroelectronics · ST Microelectronics · LQFP-100(14x14)

STM32L4R7VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V-tolerant FT_l I/O with LCD function supplied by VLCD; alternate functions include TRACECK, TIM3_ETR, SAI1_CK1, FMC_A23 and EVENTOUT.
2 PE3 bidirectional 5 V-tolerant FT_l I/O with LCD function supplied by VLCD; alternate functions include TRACED0, TIM3_CH1, OCTOSPIM_P1_DQS, FMC_A19 and EVENTOUT.
3 PE4 bidirectional 5 V-tolerant FT I/O; alternate functions include TRACED1, TIM3_CH2, SAI1_D2, DCMI_D4, LCD_B0 and FMC_A20.
4 PE5 bidirectional 5 V-tolerant FT I/O; alternate functions include TRACED2, TIM3_CH3, SAI1_CK2, DCMI_D6, LCD_G0 and FMC_A21.
5 PE6 bidirectional 5 V-tolerant FT I/O; alternate functions include TRACED3, TIM3_CH4, SAI1_D1, DCMI_D7, LCD_G1 and FMC_A22; also RTC_TAMP3 and WKUP3 as additional functions.
6 VBAT power_in Power supply for the RTC, the external 32 kHz oscillator and the backup registers when VDD is not present, 1.55 V to 3.6 V.
7 PC13 bidirectional 5 V-tolerant FT I/O supplied through the power switch, which sinks only 3 mA, so output use is limited to 2 MHz with 30 pF and it must not source LED-type loads.
8 PC14-OSC32_IN bidirectional 5 V-tolerant FT I/O (PC14) supplied through the power switch with OSC32_IN as the 32 kHz oscillator input function.
9 PC15-OSC32_OUT bidirectional 5 V-tolerant FT I/O (PC15) supplied through the power switch with OSC32_OUT as the 32 kHz oscillator output function.
10 VSS power_in Ground pin; all VSS pins must be connected to the ground supply.
11 VDD power_in Main digital and I/O supply, 1.71 V to 3.6 V.
12 PH0-OSC_IN bidirectional 5 V-tolerant FT I/O (PH0) with OSC_IN as the high-speed oscillator input function.
13 PH1-OSC_OUT bidirectional 5 V-tolerant FT I/O (PH1) with OSC_OUT as the high-speed oscillator output function.
14 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
15 PC0 bidirectional 5 V-tolerant FT_fla I/O with ADC1_IN1 analog input; alternate functions include LPTIM1_IN1, I2C3_SCL, LPUART1_RX and LPTIM2_IN1.
16 PC1 bidirectional 5 V-tolerant FT_fla I/O with ADC1_IN2 analog input; alternate functions include TRACED0, LPTIM1_OUT, SPI2_MOSI, I2C3_SDA and LPUART1_TX.
17 PC2 bidirectional 5 V-tolerant FT_la I/O with ADC1_IN3 analog input; alternate functions include LPTIM1_IN2, SPI2_MISO and OCTOSPIM_P1_IO5.
18 PC3 bidirectional 5 V-tolerant FT_a I/O with ADC1_IN4 analog input; alternate functions include LPTIM1_ETR, SAI1_D1, SPI2_MOSI and LPTIM2_ETR.
19 VSSA power_in Analog ground pin for the ADCs, DACs, comparators and operational amplifiers.
20 VREF- power_in Negative reference voltage for the ADC and DAC; must always equal VSSA.
21 VREF+ power_in Positive reference voltage for the ADC and DAC, and output of the internal voltage reference buffer when enabled; must be between 2 V and VDDA when VDDA is at least 2 V.
22 VDDA power_in Analog supply for ADCs/COMPs (1.62 V min), DACs/OPAMPs (1.8 V min), VREFBUF (2.4 V min) up to 3.6 V.
23 PA0 bidirectional 5 V-tolerant FT_a I/O with ADC1_IN5 analog input and OPAMP1_VINP; alternate functions include TIM2_CH1, TIM5_CH1, USART2_CTS_NSS and UART4_TX.
24 PA1 bidirectional 5 V-tolerant FT_la I/O with ADC1_IN6 analog input and OPAMP1_VINM; alternate functions include TIM2_CH2, TIM5_CH2, SPI1_SCK and USART2_RTS_DE.
25 PA2 bidirectional 5 V-tolerant FT_la I/O with ADC1_IN7 analog input; alternate functions include TIM2_CH3, TIM5_CH3, USART2_TX and LPUART1_TX, with WKUP4/LSCO as additional function.
26 PA3 bidirectional TT_a I/O (3.6 V tolerant) with ADC1_IN8 analog input and OPAMP1_VOUT; alternate functions include TIM2_CH4, USART2_RX and LPUART1_RX.
27 VSS power_in Ground pin; all VSS pins must be connected to the ground supply.
28 VDD power_in Main digital and I/O supply, 1.71 V to 3.6 V.
29 PA4 bidirectional TT_a I/O (3.6 V tolerant) with ADC1_IN9 analog input and DAC1_OUT1; alternate functions include SPI1_NSS, SPI3_NSS, USART2_CK and LPTIM2_OUT.
30 PA5 bidirectional TT_a I/O (3.6 V tolerant) with ADC1_IN10 analog input and DAC1_OUT2; alternate functions include TIM2_CH1, TIM2_ETR, TIM8_CH1N and SPI1_SCK.
31 PA6 bidirectional 5 V-tolerant FT_a I/O with ADC1_IN11 analog input and OPAMP2_VINP; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO and LPUART1_CTS.
32 PA7 bidirectional 5 V-tolerant FT_fla I/O with ADC1_IN12 analog input and OPAMP2_VINM; alternate functions include TIM1_CH1N, TIM3_CH2, I2C3_SCL and SPI1_MOSI.
33 PC4 bidirectional 5 V-tolerant FT_a I/O with ADC1_IN13 analog input and COMP1_INM; alternate functions include USART3_TX and OCTOSPIM_P1_IO7.
34 PC5 bidirectional 5 V-tolerant FT_a I/O with ADC1_IN14 analog input, COMP1_INP and WKUP5 wakeup; alternate functions include SAI1_D3 and USART3_RX.
35 PB0 bidirectional TT_la I/O (3.6 V tolerant) with ADC1_IN15 analog input and OPAMP2_VOUT; alternate functions include TIM1_CH2N, TIM3_CH3, SPI1_NSS and COMP1_OUT.
36 PB1 bidirectional 5 V-tolerant FT_a I/O with ADC1_IN16 analog input and COMP1_INM; alternate functions include TIM1_CH3N, TIM3_CH4, DFSDM1_DATIN0 and LPTIM2_IN1.
37 PB2 bidirectional 5 V-tolerant FT_a I/O with COMP1_INP input; alternate functions include RTC_OUT, LPTIM1_OUT, I2C3_SMBA and LCD_B1.
38 PE7 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_ETR, DFSDM1_DATIN2, LCD_B6, FMC_D4 and SAI1_SD_B.
39 PE8 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, LCD_B7, FMC_D5 and SAI1_SCK_B.
40 PE9 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_CH1, DFSDM1_CKOUT, LCD_G2, FMC_D6 and SAI1_FS_B.
41 PE10 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, OCTOSPIM_P1_CLK and FMC_D7.
42 PE11 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, OCTOSPIM_P1_NCS and FMC_D8.
43 PE12 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3 and FMC_D9.
44 PE13 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4 and FMC_D10.
45 PE14 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, OCTOSPIM_P1_IO2 and FMC_D11.
46 PE15 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_BKIN, SPI1_MOSI, OCTOSPIM_P1_IO3 and FMC_D12.
47 PB10 bidirectional 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX and LPUART1_RX.
48 PB11 bidirectional 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX and DSI_TE.
49 VSS power_in Ground pin; all VSS pins must be connected to the ground supply.
50 VDD power_in Main digital and I/O supply, 1.71 V to 3.6 V.
51 PB12 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1 and USART3_CK.
52 PB13 bidirectional 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS_NSS and LPUART1_CTS.
53 PB14 bidirectional 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM1_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2 and USART3_RTS_DE.
54 PB15 bidirectional 5 V-tolerant FT I/O; alternate functions include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, DFSDM1_CKIN2 and TIM15_CH2.
55 PD8 bidirectional 5 V-tolerant FT I/O; alternate functions include USART3_TX, DCMI_HSYNC, LCD_R3 and FMC_D13.
56 PD9 bidirectional 5 V-tolerant FT I/O; alternate functions include USART3_RX, DCMI_PIXCLK, LCD_R4, FMC_D14 and SAI2_MCLK_A.
57 PD10 bidirectional 5 V-tolerant FT I/O; alternate functions include USART3_CK, TSC_G6_IO1, LCD_R5, FMC_D15 and SAI2_SCK_A.
58 PD11 bidirectional 5 V-tolerant FT I/O; alternate functions include I2C4_SMBA, USART3_CTS_NSS, TSC_G6_IO2, LCD_R6, FMC_A16 and LPTIM2_ETR.
59 PD12 bidirectional 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH1, I2C4_SCL, USART3_RTS_DE, LCD_R7 and FMC_A17.
60 PD13 bidirectional 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH2, I2C4_SDA, TSC_G6_IO4, FMC_A18 and LPTIM2_OUT.
61 PD14 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM4_CH3, LCD_B2 and FMC_D0.
62 PD15 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM4_CH4, LCD_B3 and FMC_D1.
63 PC6 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, DCMI_D0, LCD_R0 and SAI2_MCLK_A.
64 PC7 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, DCMI_D1, LCD_R1 and SAI2_MCLK_B.
65 PC8 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM3_CH3, TIM8_CH3, TSC_G4_IO3, DCMI_D2 and SDMMC1_D0.
66 PC9 bidirectional 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TRACED0, TIM8_BKIN2, TIM3_CH4, TIM8_CH4, DCMI_D3 and OTG_FS_NOE.
67 PA8 bidirectional 5 V-tolerant FT_f I/O with Fm+ capability; alternate functions include MCO, TIM1_CH1, SAI1_CK2, USART1_CK and LPTIM2_OUT.
68 PA9 bidirectional 5 V-tolerant FT_flu I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH2, SPI2_SCK, DCMI_D0, USART1_TX and OTG_FS_VBUS.
69 PA10 bidirectional 5 V-tolerant FT_flu I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH3, SAI1_D1, DCMI_D1, USART1_RX and OTG_FS_ID.
70 PA11 bidirectional 5 V-tolerant FT_u I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS_NSS, CAN1_RX and OTG_FS_DM.
71 PA12 bidirectional 5 V-tolerant FT_u I/O with USB function supplied by VDDUSB; alternate functions include TIM1_ETR, SPI1_MOSI, USART1_RTS_DE, CAN1_TX and OTG_FS_DP.
72 PA13 bidirectional 5 V-tolerant FT I/O that after reset is the JTMS/SWDIO debug function, with the internal pull-up active; also IR_OUT and OTG_FS_NOE as alternate functions.
73 VDDUSB power_in Independent USB transceiver supply, 3.0 V to 3.6 V when USB is used.
74 VSS power_in Ground pin; all VSS pins must be connected to the ground supply.
75 VDD power_in Main digital and I/O supply, 1.71 V to 3.6 V.
76 PA14 bidirectional 5 V-tolerant FT I/O that after reset is the JTCK/SWCLK debug function, with the internal pull-down active; also LPTIM1_OUT and I2C1_SMBA as alternate functions.
77 PA15 (JTDI) bidirectional 5 V-tolerant FT I/O that after reset is the JTDI debug function, with the internal pull-up active; also TIM2_CH1, USART2_RX and SPI1_NSS as alternate functions.
78 PC10 bidirectional 5 V-tolerant FT I/O; alternate functions include TRACED1, SPI3_SCK, USART3_TX, UART4_TX and DCMI_D8.
79 PC11 bidirectional 5 V-tolerant FT I/O; alternate functions include DCMI_D2, OCTOSPIM_P1_NCS, SPI3_MISO, USART3_RX and UART4_RX.
80 PC12 bidirectional 5 V-tolerant FT I/O; alternate functions include TRACED3, SPI3_MOSI, USART3_CK, UART5_TX and DCMI_D9.
81 PD0 bidirectional 5 V-tolerant FT I/O; alternate functions include SPI2_NSS, DFSDM1_DATIN7, CAN1_RX, LCD_B4 and FMC_D2.
82 PD1 bidirectional 5 V-tolerant FT I/O; alternate functions include SPI2_SCK, DFSDM1_CKIN7, CAN1_TX, LCD_B5 and FMC_D3.
83 PD2 bidirectional 5 V-tolerant FT I/O; alternate functions include TRACED2, TIM3_ETR, USART3_RTS_DE, UART5_RX and SDMMC1_CMD.
84 PD3 bidirectional 5 V-tolerant FT I/O; alternate functions include SPI2_SCK, DCMI_D5, SPI2_MISO, USART2_CTS_NSS, LCD_CLK and FMC_CLK.
85 PD4 bidirectional 5 V-tolerant FT I/O; alternate functions include SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, OCTOSPIM_P1_IO4 and FMC_NOE.
86 PD5 bidirectional 5 V-tolerant FT I/O; alternate functions include USART2_TX, OCTOSPIM_P1_IO5, FMC_NWE and EVENTOUT.
87 PD6 bidirectional 5 V-tolerant FT I/O; alternate functions include SAI1_D1, DCMI_D10, SPI3_MOSI, DFSDM1_DATIN1, USART2_RX and FMC_NWAIT.
88 PD7 bidirectional 5 V-tolerant FT I/O; alternate functions include DFSDM1_CKIN1, USART2_CK, OCTOSPIM_P1_IO7 and FMC_NCE/FMC_NE1.
89 PB3 bidirectional 5 V-tolerant FT_la I/O that after reset is the JTDO/TRACESWO debug function; also TIM2_CH2, SPI1_SCK and SPI3_SCK as alternate functions and COMP2_INM as analog input.
90 PB4 bidirectional 5 V-tolerant FT_fa I/O that after reset is the NJTRST debug function, with the internal pull-up active; also TIM3_CH1, SPI1_MISO and COMP2_INP.
91 PB5 bidirectional 5 V-tolerant FT_la I/O; alternate functions include LPTIM1_IN1, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, USART1_CK and COMP2_OUT.
92 PB6 bidirectional 5 V-tolerant FT_fa I/O; alternate functions include LPTIM1_ETR, TIM4_CH1, I2C1_SCL, USART1_TX and DCMI_D5, with COMP2_INP as analog input.
93 PB7 bidirectional 5 V-tolerant FT_fla I/O; alternate functions include LPTIM1_IN2, TIM4_CH2, I2C1_SDA, USART1_RX, DCMI_VSYNC and FMC_NL, with PVD_IN and COMP2_INM as analog inputs.
94 PH3-BOOT0 bidirectional 5 V-tolerant FT I/O (PH3) that also serves as the dedicated BOOT0 pin; the input voltage on BOOT0 may reach 9 V.
95 PB8 bidirectional 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH3, SAI1_CK1, I2C1_SCL, DCMI_D6 and SDMMC1_D4.
96 PB9 bidirectional 5 V-tolerant FT_fl I/O; alternate functions include IR_OUT, TIM4_CH4, SAI1_D2, I2C1_SDA, SPI2_NSS and CAN1_TX.
97 PE0 bidirectional 5 V-tolerant FT I/O; alternate functions include TIM4_ETR, DCMI_D2, LCD_HSYNC, FMC_NBL0 and TIM16_CH1.
98 PE1 bidirectional 5 V-tolerant FT I/O; alternate functions include DCMI_D3, LCD_VSYNC, FMC_NBL1 and TIM17_CH1.
99 VSS power_in Ground pin; all VSS pins must be connected to the ground supply.
100 VDD power_in Main digital and I/O supply, 1.71 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage VDDX - VSS -0.3 4 V including VDD, VDDA, VDDIO2, VDDUSB, VBAT, VREF+ 139
Input voltage on FT_xxx pins VIN -0.3 V VSS-0.3 to min(VDD, VDDA, VDDIO2, VDDUSB)+4.0 139
Input voltage on TT_xx pins VIN -0.3 4 V 139
Input voltage on BOOT0 pin VIN 0 9 V VSS to 9.0 139
Total current into all VDD lines ΣIVDD 200 mA source 139
Total current out of all VSS lines ΣIVSS 200 mA sink 139
Max current into each VDD pin IVDD(PIN) 100 mA source 139
Max current out of each VSS pin IVSS(PIN) 100 mA sink 139
Output current sunk by any I/O IIO(PIN) 20 mA any I/O and control pin except FT_f 139
Total output current sunk by all I/Os ΣIIO(PIN) 100 mA 139
Storage temperature range TSTG -65 150 °C 140
Maximum junction temperature TJ 150 °C 140
Internal AHB clock frequency fHCLK 0 120 MHz 140
Standard operating voltage VDD 1.71 3.6 V 140
PG[15:2] I/Os supply voltage VDDIO2 1.08 3.6 V At least one I/O in PG[15:2] used 140
Analog supply voltage VDDA 1.62 3.6 V ADC or COMP used 140
Backup operating voltage VBAT 1.55 3.6 V 140
USB supply voltage VDDUSB 3 3.6 V USB used 141
Power dissipation LQFP100 PD 476 mW TA = 85 °C for suffix 6 141
Ambient temperature suffix 6 TA -40 85 °C Maximum power dissipation 141
Junction temperature suffix 6 TJ -40 105 °C Suffix 6 version 141
VDD fall time rate tVDD 10 µs/V VDD fall time rate 142
Reset temporization after BOR0 tRSTTEMPO 250 400 µs VDD rising 142
Brown-out reset threshold 0 VBOR0 1.62 1.66 1.7 V Rising edge 142
Brown-out reset threshold 1 VBOR1 2.06 2.1 2.14 V Rising edge 142
Brown-out reset threshold 4 VBOR4 2.85 2.9 2.95 V Rising edge 142
BOR (except BOR0) and PVD consumption from VDD IDD(BOR_PVD) 1.1 1.6 µA 143
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +130 °C 144
Average temperature coefficient of VREFINT TCoeff 30 50 ppm/°C -40°C < TA < +130°C 144
Supply current in Run mode, Range 1 Boost IDD(Run) 18.5 21 mA 120 MHz, 25°C, single bank, ART enable, fHSE bypass, PLL ON 147
Supply current in Run mode, Range 1 Boost, 85°C IDD(Run) 21 26 mA 120 MHz, 85°C, single bank, ART enable 147
Supply current in Stop 2 mode, RTC disabled IDD(Stop 2) 2.55 8 µA VDD = 3 V, 25°C 168
Supply current in Stop 0 mode IDD(Stop 0) 295 570 µA VDD = 3 V, 25°C, RTC disabled 171
Supply current in Standby mode IDD(Standby) 150 370 nA VDD = 3 V, 25°C, RTC disabled, no independent watchdog 171

CAD (KiCad official)

  • Symbol: STM32L4R7VIT6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32l4r7vit6-etched.step / stm32l4r7vit6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l4r7vit6.step / stm32l4r7vit6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (307 pp, sha256 049cc34598b1e11a, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF