3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSPX5205M5-L-3-0
MaxLinear · Linear Voltage Regulators (LDO) · SOT-23-5
SPX5205M5-L-3-0 from MaxLinear, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin, recommended operating range +2.5V to +16V (absolute maximum -20V to +20V, with reverse-battery protection). |
| 2 | GND | power_in | Ground pin for the regulator. |
| 3 | EN | input | Enable input: pull above 2.0V to turn the regulator on and below 0.4V to turn it off, may be tied directly to VIN, recommended range 0V to VIN. |
| 4 | BYP | passive | Bypass pin that gives access to the internal reference; a 10nF capacitor significantly reduces output noise, it may be left unconnected, and a larger capacitor slows start-up. |
| 5 | VOUT | power_out | Regulated 3.0V output (1% initial accuracy) for up to 150mA, requiring an output capacitor for stability (1μF used in the specifications). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | VOUT | -1 | 1 | %VNOM | 2 | ||
| Output voltage tolerance | VOUT | -2 | 2 | %VNOM | Full junction temperature range -40°C to +125°C | 2 | |
| Output voltage temperature coefficient | 57 | ppm/°C | Full junction temperature range -40°C to +125°C | 2 | |||
| Line regulation | 0.03 | 0.1 | %/V | VIN = VOUT + 1 to 16V and VEN ≤ 6V | 2 | ||
| Line regulation | 0.2 | %/V | VIN = VEN = VOUT + 1 ≤ 8V, full junction temperature range | 2 | |||
| Load regulation | 0.1 | 0.2 | % | VIN = VOUT + 1 ≥ 2.5V | 2 | ||
| Load regulation | 0.5 | % | IL = 1mA to 150mA, full junction temperature range | 2 | |||
| Load regulation | 1 | % | IL = 100µA to 1mA, full junction temperature range | 2 | |||
| Dropout voltage (VIN - VO) | 30 | 50 | mV | IL = 100µA | 2 | ||
| Dropout voltage (VIN - VO) | 70 | mV | IL = 100µA, full junction temperature range | 2 | |||
| Dropout voltage (VIN - VO) | 140 | 190 | mV | IL = 50mA | 2 | ||
| Dropout voltage (VIN - VO) | 230 | mV | IL = 50mA, full junction temperature range | 2 | |||
| Dropout voltage (VIN - VO) | 180 | 250 | mV | IL = 100mA | 2 | ||
| Dropout voltage (VIN - VO) | 300 | mV | IL = 100mA, full junction temperature range | 2 | |||
| Dropout voltage (VIN - VO) | 210 | 275 | mV | IL = 150mA | 2 | ||
| Dropout voltage (VIN - VO) | 350 | mV | IL = 150mA, full junction temperature range | 2 | |||
| Quiescent current (IGND) | IGND | 0.05 | 1 | µA | VENABLE ≤ 0.4V | 2 | |
| Quiescent current (IGND) | IGND | 5 | µA | VENABLE ≤ 0.25V, full junction temperature range | 2 | ||
| Ground pin current (IGND) | IGND | 70 | 125 | µA | IL = 100µA | 2 | |
| Ground pin current (IGND) | IGND | 150 | µA | IL = 100µA, full junction temperature range | 2 | ||
| Ground pin current (IGND) | IGND | 350 | 600 | µA | IL = 50mA | 2 | |
| Ground pin current (IGND) | IGND | 800 | µA | IL = 50mA, full junction temperature range | 2 | ||
| Ground pin current (IGND) | IGND | 750 | 1000 | µA | IL = 100mA | 2 | |
| Ground pin current (IGND) | IGND | 1500 | µA | IL = 100mA, full junction temperature range | 2 | ||
| Ground pin current (IGND) | IGND | 1300 | 1900 | µA | IL = 150mA | 2 | |
| Ground pin current (IGND) | IGND | 2500 | µA | IL = 150mA, full junction temperature range | 2 | ||
| Ripple rejection | 70 | dB | 3 | ||||
| Current limit (ILIMIT) | ILIMIT | 360 | 500 | mA | VOUT = 0V | 3 | |
| Output noise (eNO) | eNO | 300 | µVRMS | IL = 10mA, CL = 1µF, CIN = 1µF (10Hz - 100kHz) | 3 | ||
| Output noise (eNO) | eNO | 40 | µVRMS | IL = 10mA, CL = 10µF, CBYP = 1µF, CIN = 1µF (10Hz - 100kHz) | 3 | ||
| Input voltage level logic low | VIL | 0.4 | V | OFF | 3 | ||
| Input voltage level logic high | VIL | 2 | V | ON | 3 | ||
| Enable input current | 0.01 | 2 | µA | VIL ≤ 0.4V | 3 | ||
| Enable input current | 3 | 20 | µA | VIH ≥ 2.0V | 3 | ||
| Input Supply Voltage | 2.5 | 16 | V | 2 | |||
| Operating Junction Temperature Range | -40 | 125 | °C | 2 | |||
| Enable Input Voltage | 0 | V | Upper limit is VIN | 2 | |||
| Input Supply Voltage | -20 | 20 | V | 2 | |||
| Enable Input Voltage | -20 | 20 | V | 2 | |||
| Junction to ambient thermal resistance (ѳJA) | ѳJA | 220 | °C/W | Mounted on a PC board | 3 |
CAD (KiCad official)
- Symbol:
SPX5205M5-L-3-0 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
spx5205m5-l-3-0-etched.step/spx5205m5-l-3-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);spx5205m5-l-3-0.step/spx5205m5-l-3-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (8 pp, sha256
bd325c794cad756a, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).