3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLPC802M001JDH16FP
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-16
LPC802M001JDH16FP from NXP Semicon, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_17/ADC_9 | bidirectional | General-purpose port 0 I/O pin 17, also ADC input 9; a 5 V tolerant digital pin that loses 5 V tolerance when configured as an analog input. |
| 2 | PIO0_13/ADC_10 | bidirectional | General-purpose port 0 I/O pin 13, also ADC input 10; a 5 V tolerant digital pin that loses 5 V tolerance when configured as an analog input. |
| 3 | PIO0_12 | bidirectional | General-purpose port 0 I/O pin 12 and high-current output driver pin (5 V tolerant); a LOW level on this pin during reset starts the ISP command handler. |
| 4 | RESET/PIO0_5 | input | External reset input (5 V tolerant, with 20 ns glitch filter); a LOW-going pulse as short as 50 ns resets the device, and the pin may be left unconnected or used as GPIO PIO0_5 when no external reset is needed. |
| 5 | PIO0_4/ADC_11/TRSTN | bidirectional | General-purpose port 0 I/O pin 4, also ADC input 11 and JTAG TRST (boundary scan mode only); a 5 V tolerant digital pin that loses 5 V tolerance when configured as an analog input. |
| 6 | SWCLK/PIO0_3/TCK | bidirectional | Serial Wire Clock (enabled by default) that also serves as General-purpose port 0 I/O pin 3 and, in boundary scan mode, JTAG TCK; a 5 V tolerant pad with high-current output driver. |
| 7 | SWDIO/PIO0_2/TMS | bidirectional | Serial Wire Debug I/O (enabled by default) that also serves as General-purpose port 0 I/O pin 2 and, in boundary scan mode, JTAG TMS; a 5 V tolerant pad with high-current output driver. |
| 8 | PIO0_11/ADC_6/WKTCLKIN | bidirectional | General-purpose port 0 I/O pin 11, also ADC input 6 and optional external clock input for the self-wake-up timer (WKTCLKIN, active in sleep, deep-sleep and power-down modes; enabled via PMU PINENABLE0). |
| 9 | PIO0_1/ADC_0/ACMP_I2/CLKIN/TDI | bidirectional | General-purpose port 0 I/O pin 1, also ADC input 0, analog comparator input 2, external clock input CLKIN and, in boundary scan mode, JTAG TDI; a 5 V tolerant digital pin that loses 5 V tolerance when configured as analog input. |
| 10 | PIO0_9/ADC_4 | bidirectional | General-purpose port 0 I/O pin 9, also ADC input 4; in ISP mode this pin is U0_TXD for dual supply devices, and it is a 5 V tolerant digital pin. |
| 11 | PIO0_8/ADC_5 | bidirectional | General-purpose port 0 I/O pin 8, also ADC input 5; in ISP mode this pin is U0_RXD for dual supply devices, and it is a 5 V tolerant digital pin. |
| 12 | VDD | power_in | Supply voltage (single or dual supplies, 1.71 V to 3.6 V); on this package VDD also supplies the I/Os on the left side because no VDDIO pin is provided. |
| 13 | VSS | power_in | Ground. |
| 14 | PIO0_7/ADC_1/ACMPVREF | bidirectional | General-purpose port 0 I/O pin 7, also ADC input 1 and alternate reference voltage for the analog comparator (ACMPVREF). |
| 15 | VREFP | passive | ADC positive reference voltage input; must be equal to or lower than VDD. |
| 16 | PIO0_0/ACMP_I1/TDO | bidirectional | General-purpose port 0 I/O pin 0, also analog comparator input 1 and, in boundary scan mode, JTAG TDO; in ISP mode this pin is U0_RXD for single supply devices, and it has an internal pull-up. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | TSSOP-16 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (core and external rail) | VDD | -0.5 | 4.6 | V | 34 | ||
| Reference voltage on pin VREFP | Vref | -0.5 | V | 34 | |||
| Input voltage, 5 V tolerant I/O pins | VI | -0.5 | 5.4 | V | 5 V tolerant I/O pins; VDD ≥ 1.71 V | 34 | |
| Input voltage, 3 V tolerant I/O pin ACMPVREF | VI | -0.5 | 3.6 | V | 3 V tolerant I/O pin ACMPVREF | 34 | |
| Analog input voltage on digital pins configured for an analog function | VIA | -0.5 | 4.6 | V | digital pins configured for an analog function | 34 | |
| Supply current per supply pin (TSSOP16) | IDD | 30 | mA | per supply pin (TSSOP16) | 34 | ||
| Ground current per ground pin (TSSOP16) | ISS | 30 | mA | per ground pin (TSSOP16) | 34 | ||
| I/O latch-up current | Ilatch | 100 | mA | -(0.5VDD) < VI < (1.5VDD); Tj < 125 °C | 34 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 34 | ||
| Maximum junction temperature | Tj(max) | 150 | °C | 34 | |||
| Total power dissipation per package (TSSOP16) | Ptot(pack) | 0.29 | W | TSSOP16; based on package heat transfer, not device power consumption; JEDEC (4.5 in × 4 in); still air | 34 | ||
| Total power dissipation per package (TSSOP16) | Ptot(pack) | 0.22 | W | TSSOP16; based on package heat transfer, not device power consumption; single layer (4.5 in × 3 in); still air | 34 | ||
| Electrostatic discharge voltage (HBM) | Vesd | 2000 | V | human body model; all pins | 35 | ||
| Thermal resistance junction-to-ambient tolerance (TSSOP16) | Rth(j-a) | -15 | 15 | % | JEDEC (4.5 in × 4 in); still air | 36 | |
| Thermal resistance junction-to-case tolerance (TSSOP16) | Rth(j-c) | -15 | 15 | % | 36 | ||
| Clock frequency, internal CPU/system clock | fclk | 15 | MHz | internal CPU/system clock | 37 | ||
| Supply voltage (core and external rail) | VDD | 1.71 | 3.6 | V | 37 | ||
| Supply voltage (core and external rail) for ADC operations | VDD | 2.5 | 3.6 | V | For ADC operations | 37 | |
| ADC positive reference voltage | Vref | 2.5 | V | on pin VREFP | 37 | ||
| Pin capacitance, pins with analog and digital functions | Cio | 7.1 | pF | pins with analog and digital functions | 37 | ||
| Pin capacitance, pins with digital functions only | Cio | 2.8 | pF | pins with digital functions only | 37 | ||
| Deep-sleep mode supply current | IDD | 100 | 175 | μA | Deep-sleep mode; VDD = 3.3 V; Tamb = 25 °C | 38 | |
| Deep-sleep mode supply current | IDD | 240 | μA | Tamb = 105 °C | 38 | ||
| Power-down mode supply current | IDD | 6 | 14 | μA | Power-down mode; VDD = 3.3 V; Tamb = 25 °C | 38 | |
| Power-down mode supply current | IDD | 75 | μA | Tamb = 105 °C | 38 | ||
| Deep power-down mode supply current | IDD | 0.15 | 0.5 | μA | Deep power-down mode; VDD = 3.3 V; Tamb = 25 °C | 38 | |
| Deep power-down mode supply current | IDD | 7 | μA | Tamb = 105 °C | 38 | ||
| LOW-level input current (standard port pins) | IIL | 0.5 | 10 | nA | VI = 0 V; on-chip pull-up resistor disabled | 41 | |
| HIGH-level input current (standard port pins) | IIH | 0.5 | 10 | nA | VI = VDD; on-chip pull-down resistor disabled | 41 | |
| OFF-state output current (standard port pins) | IOZ | 0.5 | 10 | nA | VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled | 41 | |
| Input voltage (standard port pins) | VI | 0 | 5.4 | V | VDD ≥ 1.71 V; 5 V tolerant pins except PIO0_7 | 41 | |
| Input voltage (standard port pins) | VI | 0 | 3.6 | V | VDD = 0 V | 41 | |
| LOW-level output voltage (standard port pins) | VOL | 0.5 | V | IOL = 4 mA; 2.5 V <= VDD <= 3.6 V | 41 | ||
| HIGH-level output current (standard port pins) | IOH | 4 | mA | VOH = VDD - 0.4 V; 2.5 V ≤ VDD ≤ 3.6 V | 42 | ||
| HIGH-level output current (standard port pins) | IOH | 3 | mA | VOH = VDD - 0.5 V; 1.71 V ≤ VDD ≤ 2.5 V | 42 | ||
| LOW-level output current (standard port pins) | IOL | 4 | mA | VOL = 0.5 V; 2.5 V ≤ VDD ≤ 3.6 V | 42 | ||
| LOW-level output current (standard port pins) | IOL | 3 | mA | 1.71 V ≤ VDD < 2.5 V | 42 | ||
| HIGH-level short-circuit output current (standard port pins) | IOHS | 45 | mA | VOH = 0 V | 42 | ||
| LOW-level short-circuit output current (standard port pins) | IOLS | 50 | mA | VOL = VDD | 42 | ||
| Pull-down current (standard port pins) | Ipd | 10 | 50 | 150 | μA | VI = 5 V | 42 |
| Pull-down current (standard port pins) | Ipd | 10 | 50 | 90 | μA | VI = 0 V; 2.0 V ≤ VDD ≤ 3.6 V | 42 |
| Pull-down current (standard port pins) | Ipd | 7 | 50 | 85 | μA | VI = 0 V; 1.71 V ≤ VDD < 2.0 V | 42 |
| Pull-up current (standard port pins) | Ipu | 0 | 0 | 0 | μA | VDD < VI < 5 V | 42 |
| Analog input capacitance | Cia | 26 | pF | 53 | |||
| ADC clock frequency | fclk(ADC) | 15 | MHz | 53 | |||
| ADC sampling frequency | fs | 480 | Ksamples/s | 53 | |||
| Comparator reference voltage | Vref(cmp) | 1.5 | 3.6 | V | pin ACMPVREF | 57 | |
| Internal voltage reference output voltage | VO | 860 | 940 | mV | Tamb = 25 °C to 105°C | 56 | |
| Flash endurance | Nendu | 200000 | 500000 | cycles | 47 | ||
| Flash retention time, powered | tret | 10 | years | powered | 47 | ||
| Flash retention time, not powered | tret | 20 | years | not powered | 47 | ||
| LPOsc clock frequency tolerance (nominal 1 MHz) | fosc(RC) | -3 | 3 | % | 47 | ||
| FRO 12 MHz clock frequency tolerance | fosc(RC) | -1 | 1 | % | 0 °C ≤ Tamb ≤ 70 °C | 47 | |
| FRO 12 MHz clock frequency tolerance | fosc(RC) | -2 | 1 | % | -20 °C ≤ Tamb ≤ 70 °C | 47 | |
| FRO 12 MHz clock frequency tolerance | fosc(RC) | -3.5 | 2.5 | % | -40 °C ≤ Tamb ≤ 105 °C | 47 | |
| Thermal resistance junction-to-ambient, JEDEC (TSSOP16) | Rth(j-a) | 133 | °C/W | JEDEC (4.5 in × 4 in); still air | 36 | ||
| Thermal resistance junction-to-ambient, single-layer (TSSOP16) | Rth(j-a) | 182 | °C/W | single-layer (4.5 in × 3 in); still air | 36 | ||
| Thermal resistance junction-to-case (TSSOP16) | Rth(j-c) | 32 | °C/W | 36 |
CAD (KiCad official)
- Symbol:
LPC802M001JDH16FP - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
lpc802m001jdh16fp-etched.step/lpc802m001jdh16fp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc802m001jdh16fp.step/lpc802m001jdh16fp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (81 pp, sha256
5821d3c57fdb47bd, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).