component
LM27342QMYX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM27342QMYX
Texas Instruments · DC-DC Converters · MSOP-10
LM27342QMYX from Texas Instruments, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Output switch that connects to the inductor, catch diode, and bootstrap capacitor. |
| 2 | SW | output | Output switch that connects to the inductor, catch diode, and bootstrap capacitor; pins 1 and 2 are both SW. |
| 3 | BOOST | input | Boost voltage that drives the internal NMOS control switch, with a bootstrap capacitor connected between BOOST and SW (recommended Boost to SW voltage 3 V to 5.5 V). |
| 4 | EN | input | Enable control input where logic high enables operation; do not allow this pin to float or be greater than VIN + 0.3 V. |
| 5 | SYNC | input | Frequency synchronization input that is driven by an external clock or pulse train, or grounded to use the internal clock (absolute maximum SYNC voltage -0.5 V to 6 V). |
| 6 | FB | input | Feedback pin that connects to the external resistor divider to set the output voltage. |
| 7 | GND | power_in | Signal and power ground; place the bottom resistor of the feedback network as close as possible to this pin for accurate regulation. |
| 8 | AVIN | power_in | Supply voltage for the control circuitry (AVIN and PVIN recommended range 3 V to 20 V). |
| 9 | PVIN | power_in | Supply voltage for the output power stage; connect a bypass capacitor to this pin (recommended range 3 V to 20 V). |
| 10 | PVIN | power_in | Supply voltage for the output power stage; connect a bypass capacitor to this pin (recommended range 3 V to 20 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10 |
| Category | Power Management (PMIC) |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
LM27342QMYX - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
lm27342qmyx-etched.step/lm27342qmyx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm27342qmyx.step/lm27342qmyx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
cef0ca904e2ee532, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).