Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADUM5401WCRWZ-1RL

Analog Devices · DC-DC Converters · SOIC-16-300mil

ADUM5401WCRWZ-1RL from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Primary supply voltage, 3.0 V to 5.5 V.
2 GND1 power_in Ground reference for the primary side; pin 2 is internally connected to pin 8, and both should be connected to a common ground.
3 VIA input Logic Input A.
4 VIB input Logic Input B.
5 VIC input Logic Input C.
6 VOD output Logic Output D.
7 RCOUT output Regulation Control Output, connected to the RCIN pin of a slave isoPower device to let the ADuM5401W control the slave's regulation; the datasheet states it is a nonstandard output not recommended for standard digital loads.
8 GND1 power_in Ground reference for the primary side; internally connected to pin 2, and both should be connected to a common ground.
9 GNDISO power_in Ground reference for the secondary side; internally connected to pin 15, and both should be connected to a common ground.
10 VSEL input Output voltage selection: VSEL = VISO sets the VISO setpoint to 5.0 V, and VSEL = GNDISO sets it to 3.3 V; the datasheet states it has a nonstandard logic threshold of approximately 0.9 V.
11 VID input Logic Input D.
12 VOC output Logic Output C.
13 VOB output Logic Output B.
14 VOA output Logic Output A.
15 GNDISO power_in Ground reference for the secondary side; internally connected to pin 9, and both should be connected to a common ground.
16 VISO power_out Secondary supply voltage output for external loads: 3.3 V (VSEL = GNDISO) or 5.0 V (VSEL = VISO).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Setpoint VISO 4.7 5 5.4 V IISO = 0 mA 4
Line Regulation VISO (LINE) 1 mV/V IISO = 50 mA, VDD1 = 4.5 V to 5.5 V 4
Load Regulation VISO (LOAD) 1 5 % IISO = 10 mA to 90 mA 4
Output Ripple VISO (RIP) 75 mV p-p 20 MHz bandwidth, CBO = 0.1 µF//10 µF, IISO = 90 mA 4
Output Noise VISO (NOISE) 200 mV p-p CBO = 0.1 µF//10 µF, IISO = 90 mA 4
Output Supply Current IISO (MAX) 100 mA VISO > 4.5 V 4
IDD1, No VISO Load IDD1 (Q) 20 35 mA 4
IDD1, Full VISO Load IDD1 (MAX) 290 mA 4
Input supply current, ADuM5401W (25 Mbps C grade) IDD1 68 mA No VISO load 4
Available to Load, ADuM5401W (25 Mbps C grade) IISO (LOAD) 87 mA 4
Data Rate 25 Mbps Within PWD limit 4
Pulse Width PW 40 ns Within PWD limit 4
Propagation Delay tPHL, tPLH 45 60 ns 50% input to 50% output 4
Pulse Width Distortion PWD 6 ns /tPLH − tPHL/ 4
Pulse Width Distortion Change vs. Temperature 5 ps/°C 4
Propagation Delay Skew tPSK 15 ns Between any two units 4
Channel Matching, Codirectional tPSKCD 6 ns 4
Channel Matching, Opposing Directional tPSKOD 15 ns 4
Logic Low Output Voltage VOL 0 0.1 V IOx = 20 µA, VIx = VIxL 5
Logic Low Output Voltage VOL 0.2 0.4 V IOx = 4 mA, VIx = VIxL 5
Input Currents Per Channel II -20 0.01 20 µA 0 V ≤ VIx ≤ VDD1 or VISO 5
Output Rise/Fall Time tR/tF 2.5 ns 10% to 90% 5
Common-Mode Transient Immunity /CM/ 25 35 kV/µs VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V 5
Logic High Output Voltage VOH 5 V IOx = −20 µA, VIx = VIxH 5
Logic High Output Voltage VOH 4.8 V IOx = −4 mA, VIx = VIxH 5
Operating Temperature TA -40 105 °C 11
Supply Voltages VDD1 3 5.5 V 11
Storage Temperature TST -55 150 °C 12
Ambient Operating Temperature Range TA -40 105 °C 12
Supply Voltages VDD1, VISO -0.5 7 V 12
VISO Supply Current IISO 100 mA TA = −40°C to +85°C 12
VISO Supply Current IISO 60 mA TA = −40°C to +105°C 12
Input Voltage VIA, VIB, VIC, VID -0.5 V 12
Output Voltage RCOUT, VOA, VOB, VOC, VOD -0.5 V 12
Average Output Current Per Data Output Pin -10 10 mA 12
Maximum Cumulative AC HiPot 2500 V rms 5 min 12
Maximum Cumulative DC HiPot 3500 VDC 5 min 12
Common-Mode Transients -100 100 kV/µs 12
IC Junction to Ambient Thermal Resistance θJA 45 °C/W Thermocouple at center of package underside, 4-layer board with thin traces 10

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing pC leakage detection limit = 10 µA). 2 In accordance with DIN EN 69747-5-2 (VDE 0884 Teil 2):2003-1, each ADuM5401W/ADuM5402W/ADuM5403W is proof tested by applying an insulation test voltage ≥ 1590 V pea 10

CAD (KiCad official)

  • Symbol: ADUM5401WCRWZ-1RL
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adum5401wcrwz-1rl-etched.step / adum5401wcrwz-1rl-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adum5401wcrwz-1rl.step / adum5401wcrwz-1rl.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (25 pp, sha256 b0c2926ec3c19a0e, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF