3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6210A302PR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-89-5
XC6210A302PR-G from Torex Semicon, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | ON/OFF control pin: for the A type (CE High Active), H level enables the regulator and L level puts it in stand-by; the CE H level voltage is 1.3V minimum and the CE L level voltage is 0.25V maximum. |
| 2 | VSS | power_in | Ground pin; the input and output capacitors are to be connected between VIN and VSS and between VOUT and VSS. |
| 3 | NC | unconnected | No connection pin. |
| 4 | VIN | power_in | Power input; the operating input voltage range is 1.5V to 6.0V, with an absolute maximum rating of 6.5V. |
| 5 | VOUT | power_out | Regulated output; the output voltage is selectable from 0.80V to 5.00V in 0.05V steps, with a maximum output current of more than 700mA (800mA limit, TYP.) for 1.60V<VOUT<5.00V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-89-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (3.00V setting) | VOUT(E) | 2.94 | 3.06 | V | VIN=VOUT(T)+1.0V, IOUT=30mA, VCE=ON(VIN or VSS); table gives VOUT(T)x0.98 to x1.02 for VOUT(T)>1.50V | 8 | |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr·ΔVOUT) | -100 | 100 | ppm/℃ | IOUT=30mA, VCE=ON(VIN or VSS), -40℃≦Topr≦85℃ | 6 | |
| Maximum Output Current | IOUTMAX | 700 | mA | VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS), VOUT(T)>1.50V | 6 | ||
| Current Limiter | ILIM | 700 | 800 | mA | VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS), VOUT(T)>1.50V | 6 | |
| Load Regulation | ΔVOUT | 15 | 60 | mV | 1mA<IOUT<100mA, VCE=ON(VIN or VSS) | 6 | |
| Line Regulation | ΔVOUT/ΔVIN·VOUT | 0.01 | 0.2 | % / V | VOUT(T)+1.0V≦VIN≦6.0V, VCE=ON(VIN or VSS), IOUT=30mA, VOUT(T)<4.50V | 6 | |
| Dropout Voltage (IOUT=30mA) | Vdif1 | 15 | 23 | mV | IOUT=30mA, VCE=ON(VIN or VSS); 3.00V setting from voltage chart | 8 | |
| Dropout Voltage (IOUT=100mA) | Vdif2 | 50 | 75 | mV | IOUT=100mA, VCE=ON(VIN or VSS); 3.00V setting from voltage chart | 8 | |
| Supply Current (A type) | IDD | 40.5 | 67.5 | µA | VIN=VCE=VOUT(T)+1.0V; 3.00V setting from voltage chart | 8 | |
| Stand-by Current | ISTBY | -0.1 | 0.1 | µA | VIN=6.0V, VCE=OFF(VIN or VSS) | 6 | |
| CE "H" Level Current (Type A) | ICEH | 4 | 12.5 | µA | VCE=VIN=VOUT(T)+1.0V (Type A); 3.00V setting from voltage chart | 8 | |
| CE "L" Level Current (Type A) | ICEL | -0.1 | 0.1 | µA | VIN=VOUT(T)+1.0V, VCE=VSS (Type A/B/D) | 6 | |
| CE "H" Level Voltage | VCEH | 1.3 | 6 | V | 6 | ||
| CE "L" Level Voltage | VCEL | 0.25 | V | 6 | |||
| Input Voltage | VIN | 1.5 | 6 | V | 6 | ||
| Output Capacitor (CL) minimum | CL | 1 | µF | Output voltage 1.80V~5.00V | 9 | ||
| Input Voltage (absolute maximum) | VIN | 6.5 | V | 5 | |||
| Output Current | IOUT | 900 | mA | Output current rating as printed (*1: IOUT=Pd/(VIN-VOUT)) | 5 | ||
| CE Pin Voltage | VCE | 6.5 | V | Minimum printed as VSS-0.3 (not numeric) | 5 | ||
| Power Dissipation SOT-89-5 | Pd | 500 | mW | Ta=25℃, PCB mounted (reference only) | 5 | ||
| Power Dissipation SOT-89-5 (40mm x 40mm standard board) | Pd | 1300 | mW | Ta=25℃, 40mm x 40mm standard board (reference only) | 5 | ||
| Power Dissipation SOT-89-5 (JESD51-7 board) | Pd | 1750 | mW | Ta=25℃, JESD51-7 board (reference only) | 5 | ||
| Operating Temperature Range | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature Range | Tstg | -55 | 125 | ℃ | 5 |
CAD (KiCad official)
- Symbol:
XC6210A302PR-G - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
xc6210a302pr-g-etched.step/xc6210a302pr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6210a302pr-g.step/xc6210a302pr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (24 pp, sha256
41bebb0a51c12aa0, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).