3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLQP03TG1N2B02D
Murata Electronics · Inductors (SMD) · 0201
LQP03TG1N2B02D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code B) | -0.1 | 0.1 | nH | Tolerance code B: ±0.1 nH | 1 | ||
| Q (min) | Q | 13 | 1 | ||||
| DC Resistance | DCR | 0.15 | Ω | 1 | |||
| Self Resonant Frequency (SRF) | SRF | 15000 | 18100 | MHz | 1 | ||
| Rated Current | 600 | mA | Self temperature rise limited to 25°C max with rated current applied (section 7.5) | 1 | |||
| Self temperature rise at rated current | 25 | °C | Rated current applied | 5 | |||
| Operating temperature range | -55 | 125 | °C | Ambient temperature; rated current can be handled in this range | 1 | ||
| Storage temperature range | -55 | 125 | °C | Storage temperature range as printed in Rating section | 1 | ||
| Storage temperature (warehouse) | -10 | 40 | °C | Recommended warehouse storage conditions | 11 | ||
| Storage humidity (warehouse) | 15 | 85 | %RH | No rapid change in temperature and humidity | 11 | ||
| Inductance change after vibration | -10 | 10 | % | After vibration 10-2000 Hz, 2 h in each of 3 directions | 6 | ||
| Inductance change after resistance to soldering heat | -10 | 10 | % | Solder 260°C±5°C, immersion 5 s±1 s; measured after 24 h room condition | 6 | ||
| Inductance change after heat resistance | -10 | 10 | % | 125°C, 1000 h (+48h,-0h) | 7 | ||
| Soldering iron tip temperature | 350 | °C | Rework with soldering iron: pre-heat 150°C 1 min, soldering time 3(+1,-0) s, 2 times | 10 | |||
| Soldering iron output | 80 | W | Rework with soldering iron; tip diameter φ3 mm max | 10 | |||
| Reflow peak temperature (limit profile) | 260 | °C | Limit reflow profile, 10 s; 2 reflow cycles | 9 | |||
| Inductance | L | 1.2 | nH | Measured at 500 MHz, test signal level about 0 dBm (section 7.1) | 1 | ||
| Reflow peak temperature (standard profile) | 245 | °C | Standard reflow profile, tolerance ±3 °C | 9 |
CAD (KiCad official)
- Symbol:
LQP03TG1N2B02D - Footprint:
Inductor_SMD:L_0201_0603Metric - 3D model: 0201 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (12 pp, sha256
a44c6cc1c5c095a7, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).