component
ADS1014IDGST
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS1014IDGST
Texas Instruments · Analog To Digital Converters (ADC) · VSSOP-10-0.5mm
ADS1014IDGST from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADDR | input | I2C target address select pin; state is sampled continuously and can be connected to GND, VDD, SDA, or SCL for four different I2C addresses. |
| 2 | ALERT/RDY | tri_state | Open-drain comparator output or conversion ready signal; connect to VDD using a pullup resistor. |
| 3 | GND | power_in | Analog ground reference. |
| 4 | AIN0 | input | Analog input 0; single-ended or differential input configured via MUX (positive input for ADS1014). |
| 5 | AIN1 | input | Analog input 1; single-ended or differential input configured via MUX (negative input for ADS1014). |
| 6 | NC | unconnected | No connect; leave pin floating or connect to GND. |
| 7 | NC | unconnected | No connect; leave pin floating or connect to GND. |
| 8 | VDD | power_in | Analog power supply (2.0V to 5.5V); connect a 0.1μF power-supply decoupling capacitor to GND. |
| 9 | SDA | bidirectional | Serial data input/output for I2C interface; connect to VDD using a pullup resistor (1kΩ to 10kΩ typical). |
| 10 | SCL | input | Serial clock input for I2C interface; connect to VDD using a pullup resistor (1kΩ to 10kΩ typical). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Data Acquisition |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
ADS1014IDGST - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
ads1014idgst-etched.step/ads1014idgst-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads1014idgst.step/ads1014idgst.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
986db396d8b99ec5, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).