component
SMBJ75CA
Public Made by Adomby adom
Shandong Jingdao Microelectronics TVS, SMB. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSMBJ75CA
Shandong Jingdao Microelectronics · TVS · SMB
SMBJ75CA from Shandong Jingdao Microelectronics, in a SMB. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Pin 1 is listed as Cathode in the PINNING table, which the datasheet gives for the unipolar device; the text does not state a separate function for this pin on the bipolar (CA-suffix) SMBJ75CA. |
| 2 | Anode | passive | Pin 2 is listed as Anode in the PINNING table, which the datasheet gives for the unipolar device; the text does not state a separate function for this pin on the bipolar (CA-suffix) SMBJ75CA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shandong Jingdao Microelectronics |
| Package | SMB |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Peak Pulse Power Dissipation on 10/1000 us waveform | PPPM | 600 | W | 10/1000 us waveform (Note1, Note2, Fig.1) | 1 | ||
| Peak Forward Surge Current, 8.3 ms single half sine-wave | IFSM | 100 | A | 8.3 ms single half sine-wave, JEDEC method (Note 3, Fig 4) | 1 | ||
| Operating Junction and Storage Temperature Range | Tj, Tstg | -65 | 150 | °C | 1 | ||
| ESD Voltage per IEC61000-4-2, Contact | VESD1 | 30 | kV | Contact, per IEC61000-4-2 | 1 | ||
| ESD Voltage per IEC61000-4-2, Air | VESD2 | 30 | kV | Air, per IEC61000-4-2 | 1 | ||
| Typical Thermal Resistance Junction to Ambient | RθJA | 100 | °C/W | Mounted on 5 mm (0.13 mm thick) land areas (Note 2) | 1 | ||
| Reverse Stand-off Voltage | VRMW | 75 | V | 2 | |||
| Breakdown Voltage, minimum | VBR | 83.3 | V | Test current IT = 1 mA, Ta = 25°C | 2 | ||
| Breakdown Voltage, maximum | VBR | 92.1 | V | Test current IT = 1 mA, Ta = 25°C | 2 | ||
| Reverse Leakage Current | 1 | μA | Ta = 25°C | 2 | |||
| Max. Clamp Voltage | VC | 121 | V | @ IPP, Ta = 25°C | 2 | ||
| Peak Pulse Current | IPP | 5 | A | 10/1000 us waveform (Note 1, Fig 3), Ta = 25°C | 2 | ||
| Typical Junction Capacitance | CJ | 390 | pF | VR = 4 V, f = 1 MHz | 1 |
CAD (KiCad official)
- Symbol:
SMBJ75CA - Footprint:
Diode_SMD:D_SMB - 3D model: SMB (KiCad packages3D, STEP)
- 3D model files:
smbj75ca-etched.step/smbj75ca-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);smbj75ca.step/smbj75ca.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shandong Jingdao Microelectronics datasheet (4 pp, sha256
11a0cb29fa635344, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).