Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPA3136D2PWPR

Texas Instruments · Audio Amplifiers · HTSSOP-28

TPA3136D2PWPR from Texas Instruments, in a HTSSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SD input Shutdown logic input for audio amp (LOW = outputs Hi-Z, HIGH = outputs enabled), TTL logic levels with compliance to AVCC.
2 FAULT tri_state Open drain output used to display short circuit or dc detect fault status, voltage compliant to AVCC.
3 LINP input Positive audio input for left channel, biased at 3 V.
4 LINN input Negative audio input for left channel, biased at 3 V.
5 NC unconnected No Connect pin, can be shorted to PVCC, shorted to GND, or left open.
6 NC unconnected No Connect pin, can be shorted to PVCC, shorted to GND, or left open.
7 AVCC power_in Analog supply voltage.
8 GND power_in Analog signal ground.
9 GVDD power_out High-side FET gate drive supply output with nominal voltage of 7 V.
10 PLIMIT input Power Limiter Control pin, virtual output rail is approximately 4 times the voltage at this pin.
11 RINN input Negative audio input for right channel, biased at 3 V.
12 RINP input Positive audio input for right channel, biased at 3 V.
13 NC unconnected No Connect pin, can be shorted to PVCC, shorted to GND, or left open.
14 PBTL input Parallel BTL mode select pin: LOW = Stereo BTL mode, HIGH = Mono PBTL mode.
15 PVCC power_in Power supply for right channel H-bridge, right and left channel power supplies are connected internally.
16 PVCC power_in Power supply for right channel H-bridge, right and left channel power supplies are connected internally.
17 BSPR bidirectional Bootstrap input/output for right channel positive high-side FET, connect 0.22 µF capacitor from BSPR to OUTPR.
18 OUTPR output Class-D H-bridge positive output for right channel.
19 GND power_in Power ground for the H-bridges.
20 OUTNR output Class-D H-bridge negative output for right channel.
21 BSNR bidirectional Bootstrap input/output for right channel negative high-side FET, connect 0.22 µF capacitor from BSNR to OUTNR.
22 BSNL bidirectional Bootstrap input/output for left channel negative high-side FET, connect 0.22 µF capacitor from BSNL to OUTNL.
23 OUTNL output Class-D H-bridge negative output for left channel.
24 GND power_in Power ground for the H-bridges.
25 OUTPL output Class-D H-bridge positive output for left channel.
26 BSPL bidirectional Bootstrap input/output for left channel positive high-side FET, connect 0.22 µF capacitor from BSPL to OUTPL.
27 PVCC power_in Power supply for left channel H-bridge, right and left channel power supplies are connected internally.
28 PVCC power_in Power supply for left channel H-bridge, right and left channel power supplies are connected internally.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-28
Category Amplifiers/Comparators
Pins 29

CAD (KiCad official)

  • Symbol: TPA3136D2PWPR
  • Footprint: Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm
  • 3D model: HTSSOP-28 (KiCad packages3D, STEP)
  • 3D model files: tpa3136d2pwpr-etched.step / tpa3136d2pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpa3136d2pwpr.step / tpa3136d2pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 5c11f426fed7ffaf, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF