3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownVS-80TPS16L-M3
Vishay Intertech · Thyristors (SCR)/Modules · TO-247AD
VS-80TPS16L-M3 from Vishay Intertech, in a TO-247AD. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode (K) is the main current terminal of the single SCR; the datasheet gives no cathode-specific limit, and the anode-to-cathode path is rated for 1600 V VRRM/VDRM and 80 A average on-state current (IT(AV), TC = 113 °C). |
| 2 | A | passive | Anode (A) is the main current terminal of the single SCR, with repetitive peak reverse and off-state voltage VRRM/VDRM of 1600 V and maximum average on-state current IT(AV) of 80 A at TC = 113 °C. |
| 3 | G | input | Gate (G) triggers turn-on, with required DC gate voltage VGT max 1.5 V and gate current IGT max 100 mA at TJ = 25 °C, peak gate current IGM 2.5 A, peak gate power PGM 10 W, and peak negative gate voltage -VGM 10 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | TO-247AD |
| Category | Transistors/Thyristors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum average on-state current | IT(AV) | 80 | A | TC = 113 °C, 180° conduction half sine wave | 2 | ||
| Maximum continuous RMS on-state current as AC switch | IT(RMS) | 126 | A | 2 | |||
| Peak one-cycle non-repetitive surge current | ITSM | 840 | A | 10 ms sine pulse, rated VRRM applied, initial TJ = TJ maximum | 2 | ||
| Peak one-cycle non-repetitive surge current | ITSM | 1000 | A | 10 ms sine pulse, no voltage reapplied, initial TJ = TJ maximum | 2 | ||
| I2t for fusing | I2t | 3536 | A2s | 10 ms sine pulse, rated VRRM applied | 2 | ||
| I2t for fusing | I2t | 5000 | A2s | 10 ms sine pulse, no voltage reapplied | 2 | ||
| I2√t for fusing | I2√t | 50000 | A2√s | t = 0.1 ms to 10 ms, no voltage reapplied, TJ = 125 °C | 2 | ||
| On-state voltage | VT | 1.22 | 1.4 | V | 80 A, TJ = 25 °C | 2 | |
| On-state voltage | VT | 1.48 | 1.66 | V | 160 A, TJ = 25 °C | 2 | |
| On-state voltage | VT | 1.16 | 1.24 | V | 80 A, TJ = 125 °C | 2 | |
| On-state voltage | VT | 1.49 | 1.62 | V | 160 A, TJ = 125 °C | 2 | |
| Low level value of threshold voltage | VT01 | 0.8 | V | TJ = 150 °C | 2 | ||
| High level value of threshold voltage | VT02 | 0.89 | V | 2 | |||
| Low level value of on-state slope resistance | rt1 | 4.82 | mΩ | TJ = 150 °C | 2 | ||
| High level value of on-state slope resistance | rt2 | 4.51 | mΩ | 2 | |||
| Rate of rise of turned-on current | dI/dt | 500 | A/μs | TJ = 125 °C, VR = 1000 V, IT = 100 A, Igt = 450 mA, VGT = 2.5 V | 2 | ||
| Holding current | IH | 200 | mA | Anode supply = 6 V, resistive load, TJ = 25 °C | 2 | ||
| Latching current | IL | 400 | mA | 2 | |||
| Reverse and direct leakage current | IRRM/IDRM | 50 | 200 | μA | TJ = 25 °C | 2 | |
| Reverse and direct leakage current | IRRM/IDRM | 10 | 60 | mA | TJ = 125 °C | 2 | |
| Rate of rise of off-state voltage | dV/dt | 1000 | V/μs | TJ = TJ maximum, linear to 80 % VDRM, Rg-k = open | 2 | ||
| Peak gate power | PGM | 10 | W | 10 ms sine pulse, no voltage reapplied | 2 | ||
| Average gate power | PG(AV) | 2.5 | W | 2 | |||
| Peak gate current | IGM | 2.5 | A | 2 | |||
| Peak negative gate voltage | -VGM | 10 | V | 2 | |||
| Required DC gate voltage to trigger | VGT | 1.5 | V | TJ = 25 °C Anode supply = 6 V resistive load | 2 | ||
| Required DC gate to trigger current | IGT | 100 | mA | TJ = 25 °C Anode supply = 6 V resistive load | 2 | ||
| DC gate voltage not to trigger | VGD | 0.2 | V | TJ = 125 °C, VDRM = 80 % rated value | 2 | ||
| DC gate current not to trigger | IGD | 5 | mA | 2 | |||
| Peak repetitive reverse voltage | VRRM/VDRM | 1600 | V | 1 | |||
| Non-repetitive peak reverse voltage | VRSM | 1700 | V | 1 | |||
| Maximum operating junction and storage temperature range | TJ, TStg | -40 | 150 | °C | 3 | ||
| Maximum thermal resistance, junction to case | RthJC | 0.23 | °C/W | 3 | |||
| Maximum thermal resistance, junction to ambient | RthJA | 40 | °C/W | 3 | |||
| Typical thermal resistance, case to heatsink | RthCS | 0.2 | °C/W | Mounting surface, smooth, and greased | 3 | ||
| ΔRthJ-HS conduction per junction, sine half-wave 180° | ΔRthJ-HS | 0.031 | °C/W | Sine half-wave conduction, per junction | 3 | ||
| ΔRthJ-HS conduction per junction, sine half-wave 120° | ΔRthJ-HS | 0.036 | °C/W | Sine half-wave conduction, per junction | 3 | ||
| ΔRthJ-HS conduction per junction, sine half-wave 90° | ΔRthJ-HS | 0.04 | °C/W | Sine half-wave conduction, per junction | 3 | ||
| ΔRthJ-HS conduction per junction, sine half-wave 60° | ΔRthJ-HS | 0.042 | °C/W | Sine half-wave conduction, per junction | 3 | ||
| ΔRthJ-HS conduction per junction, sine half-wave 30° | ΔRthJ-HS | 0.044 | °C/W | Sine half-wave conduction, per junction | 3 | ||
| ΔRthJ-HS conduction per junction, rectangular wave 180° | ΔRthJ-HS | 0.028 | °C/W | Rectangular wave conduction, per junction | 3 | ||
| ΔRthJ-HS conduction per junction, rectangular wave 120° | ΔRthJ-HS | 0.036 | °C/W | Rectangular wave conduction, per junction | 3 | ||
| ΔRthJ-HS conduction per junction, rectangular wave 90° | ΔRthJ-HS | 0.038 | °C/W | Rectangular wave conduction, per junction | 3 | ||
| ΔRthJ-HS conduction per junction, rectangular wave 60° | ΔRthJ-HS | 0.04 | °C/W | Rectangular wave conduction, per junction | 3 | ||
| ΔRthJ-HS conduction per junction, rectangular wave 30° | ΔRthJ-HS | 0.042 | °C/W | Rectangular wave conduction, per junction | 3 |
CAD (KiCad official)
- Symbol:
VS-80TPS16L-M3 - Footprint:
Package_TO_SOT_THT:TO-247-3_Vertical - 3D model: TO-247AD (KiCad packages3D, STEP)
- 3D model files:
vs-80tps16l-m3-etched.step/vs-80tps16l-m3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vs-80tps16l-m3.step/vs-80tps16l-m3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (7 pp, sha256
7dfa6848f0eadc78, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).