3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP100T-300I
Microchip Tech · Monitors & Reset Circuits · SOT-23
MCP100T-300I from Microchip Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low push-pull RESET output (MCP100), held low while VDD is below the trip point (2.85 V min to 3.0 V max for -300) and for 350 ms typical (150 to 700 ms) after VDD rises above it. |
| 2 | VDD | power_in | Supply voltage input monitored against the trip point, operating range 1.0 V to 5.5 V (7.0 V absolute maximum), with a 0.1 uF bypass capacitor recommended close to the pin. |
| 3 | VSS | power_in | Ground reference for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23 |
| Category | Power Supply Chip |
| Pins | 3 |
CAD (KiCad official)
- Symbol:
MCP100T-300I - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
mcp100t-300i-etched.step/mcp100t-300i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp100t-300i.step/mcp100t-300i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (16 pp, sha256
2e50e62b4cee492f, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).