Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HCPL-0211-000E

Broadcom/AVAGO · Logic Output Optoisolators · SOIC-8

HCPL-0211-000E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection; leave this pin unconnected.
2 ANODE input LED anode input; forward input current IF(ON) is specified at 1.6 mA to 5 mA with VF(OFF) at 0 V to 0.8 V.
3 CATHODE input LED cathode input, connected to the internal GaAsP LED with forward current IF flowing from anode to cathode.
4 NC unconnected No internal connection; leave this pin unconnected.
5 GND power_in Ground reference for the output stage; a 0.1 μF bypass capacitor must be connected between pins 5 and 8.
6 NC unconnected No internal connection; leave this pin unconnected.
7 VO output Totem-pole logic output (no pullup resistor required); logic high is VOH and logic low is VOL of 0.5 V maximum at IOL = 6.4 mA.
8 VCC power_in Supply voltage with a specified operating range of 4.5 V to 20 V; a 0.1 μF bypass capacitor must be connected between pins 5 and 8.

Key specifications

Parameter Value
Manufacturer Broadcom/AVAGO
Package SOIC-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VCC 4.5 20 V 9
Forward Input Current (ON) IF(ON) 1.6 5 mA 9
Forward Input Voltage (OFF) VF(OFF) 0.8 V 9
Operating Temperature TA -40 85 °C 9
Junction Temperature TJ -40 125 °C 9
Storage Temperature TS -55 125 °C 9
Operating Temperature TA -40 85 °C 9
Average Forward Input Current IF(AVG) 10 mA 9
Peak Transient Input Current IF(TRAN) 1 A ≤ 1 μs Pulse Width, 300 pps 9
Reverse Input Voltage VR 5 V 9
Average Output Current IO 25 mA 9
Supply Voltage VCC 0 20 V 9
Output Voltage VO -0.5 20 V 9
Total Package Power Dissipation PT 210 mW 9
Logic Low Output Voltage VOL 0.5 V IOL = 6.4 mA (4 TTL Loads) 10
Logic High Output Voltage VOH 2.4 V IOH = -2.6 mA 10
Logic High Output Voltage VOH 2.7 V IOH = -0.4 mA 10
Output Leakage Current IOHH 100 μA VO = 5.5 V, IF = 5 mA 10
Output Leakage Current IOHH 500 μA VO = 20 V 10
Logic Low Short Circuit Output Current IOSL 15 mA VO = VCC = 5.5 V, VF = 0 V 10
Logic Low Short Circuit Output Current IOSL 20 mA VO = VCC = 20 V, VF = 0 V 10
Logic High Short Circuit Output Current IOSH -10 mA VCC = 5.5 V, IF = 5 mA 10
Logic High Short Circuit Output Current IOSH -20 mA VCC = 20 V, IF = 5 mA 10
Logic Low Supply Current ICCL 3.7 6 mA VCC = 5.5 V, VF = 0 V 10
Logic Low Supply Current ICCL 4.3 7 mA VCC = 20 V, VF = 0 V 10
Logic High Supply Current ICCH 2.4 4 mA VCC = 5.5 V, IF = 5 mA 10
Logic High Supply Current ICCH 2.7 5 mA VCC = 20 V, IF = 5 mA 10
Input Forward Voltage VF 1.5 1.7 V TA = 25°C, IF = 5 mA 10
Input Forward Voltage VF 1.85 V IF = 5 mA 10
Input Reverse Breakdown Voltage BVR 5 V IR = 10 μA 10
Input Diode Temperature Coefficient VF -1.7 mV/°C IF = 5 mA 10
Input Capacitance CIN 60 pF f = 1 MHz, VF = 0 V 10
Logic High Common Mode Transient Immunity /CMH/ 5000 V/μs /VCM/ = 300 V, IF = 1.6 mA 11
Logic High Common Mode Transient Immunity /CMH/ 10000 V/μs /VCM/ = 1 kV, IF = 5.0 mA 11
Logic Low Common Mode Transient Immunity /CML/ 10000 V/μs /VCM/ = 1 kV, VF = 0 V 11
Propagation Delay Time to Logic Low Output tPHL 150 ns Without Peaking Capacitor 11
Propagation Delay Time to Logic Low Output tPHL 150 300 ns With Peaking Capacitor 11
Propagation Delay Time to Logic High Output tPLH 110 ns Without Peaking Capacitor 11
Propagation Delay Time to Logic High Output tPLH 90 300 ns With Peaking Capacitor 11
Output Rise Time (10-90%) tr 30 ns 11
Output Fall Time (90-10%) tf 7 ns 11
Input-Output Momentary Withstand Voltage VISO 3750 V rms RH < 50%, t = 1 min. 12
Input-Output Capacitance CI-O 0.6 pF f = 1 MHz 12
Minimum External Air Gap (External Clearance) L(101) 4.9 mm SO-8 package; measured from input terminals to output terminals, shortest distance through air 7
Minimum External Tracking (External Creepage) L(102) 4.8 mm SO-8 package; measured from input terminals to output terminals, shortest distance path along body 7
Minimum Internal Plastic Gap (Internal Clearance) 0.08 mm SO-8 package; through insulation distance, conductor to conductor 7
Tracking Resistance (Comparative Tracking Index) CTI 200 Volts DIN IEC 112/VDE 0303 Part 1 7

CAD (KiCad official)

  • Symbol: HCPL-0211-000E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: hcpl-0211-000e-etched.step / hcpl-0211-000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-0211-000e.step / hcpl-0211-000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom/AVAGO datasheet (16 pp, sha256 2a612efba8d4ea87, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF