Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC7001IMSE-JSM

JSMSEMI · Gate Drivers · SOP-8

LTC7001IMSE-JSM from JSMSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Low-voltage supply for the driver, recommended 5V to 20V (absolute maximum 25V), with VCC undervoltage lockout thresholds of 4.2V rising and 4.0V falling typical.
2 IN input Signal input compatible with 3.3V, 5V and 15V logic, with 2.5V minimum high-level and 0.8V maximum low-level thresholds, recommended 0V to VCC.
3 OSC input OSC input, recommended 0V to VCC (absolute maximum GND-0.3V to VCC+0.3V), driven by an external 20kHz signal or an RC network in the application circuits.
4 GND power_in Ground reference for the device; all voltage ratings are referenced to GND.
5 OL output Low-side output (optional), rated GND-0.3V to VCC+0.3V.
6 TS passive Floating ground (TS) for the high-side driver, recommended GND-9V to 250V and operating range must stay within -9V to 250V, with a maximum dV/dt of 50V/ns.
7 OUT output Signal output to the external N-channel MOSFET gate, swinging between TS and BST with peak source/sink current typically 290mA/600mA.
8 BST power_in Floating power supply, recommended TS+5V to TS+20V (absolute maximum 275V), with BST undervoltage lockout thresholds of 4.2V rising and 4.0V falling typical.

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOP-8
Category Motor Driver ICs
Pins 8

CAD (KiCad official)

  • Symbol: LTC7001IMSE-JSM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ltc7001imse-jsm-etched.step / ltc7001imse-jsm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc7001imse-jsm.step / ltc7001imse-jsm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (11 pp, sha256 316d0cd4ae9edcf0, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF