component
TPS60500DGSR
Public Made by Adomby adom
Texas Instruments Charge Pumps, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS60500DGSR
Texas Instruments · Charge Pumps · VSSOP-10-0.5mm
TPS60500DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input; high disables device with load isolated from input, low enables device. |
| 2 | PG | output | Open-drain power good output; goes high when OUT voltage reaches approximately 97% of nominal value. |
| 3 | C2F− | passive | Negative terminal of flying capacitor C2F; 1-µF ceramic capacitor required. |
| 4 | C2F+ | passive | Positive terminal of flying capacitor C2F; 1-µF ceramic capacitor required. |
| 5 | VIN | power_in | Supply input; accepts 1.8 V to 6.5 V input voltage range. |
| 6 | C1F+ | passive | Positive terminal of flying capacitor C1F; 1-µF ceramic capacitor required. |
| 7 | OUT | power_out | Regulated power output of 3.3 V, 1.8 V, 1.5 V, or adjustable 0.8 V to 3.3 V; bypass to GND with output filter capacitor. |
| 8 | C1F− | passive | Negative terminal of flying capacitor C1F; 1-µF ceramic capacitor required. |
| 9 | GND | power_in | Ground connection and reference potential. |
| 10 | FB | output | Feedback connection; for TPS60500 connect via voltage divider to output voltage, for TPS60501-TPS60503 connect directly to output voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Management (PMIC) |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
TPS60500DGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tps60500dgsr-etched.step/tps60500dgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps60500dgsr.step/tps60500dgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
1f029955b1a7942c, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).