component
CP6208DTR
Public Made by Adomby adom
XBLW Stepper Motor Driver, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCP6208DTR
XBLW · Stepper Motor Driver · SOP-8
CP6208DTR from XBLW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vcc | power_in | Supply pin; recommended supply range is 2.8 V to 18 V, with an absolute maximum of 22 V. |
| 2 | Bout | output | B-channel motor driver output, rated up to 300 mA absolute maximum (100 mA typical), with saturation voltage of 1.0 to 1.6 V at Io = 100 mA. |
| 3 | GND | power_in | Ground pin; one of the two GND pins on the SOP-8 package (pins 3 and 7). |
| 4 | Aout | output | A-channel motor driver output, rated up to 300 mA absolute maximum (100 mA typical), with saturation voltage of 1.0 to 1.6 V at Io = 100 mA. |
| 5 | Bin | input | B-channel TTL logic input; a high level requires 2.0 V or more and a low level requires 0.8 V or less. |
| 6 | NC | unconnected | No connection (empty pin) on the SOP-8 package. |
| 7 | GND | power_in | Ground pin; the second of the two GND pins on the SOP-8 package (pins 3 and 7). |
| 8 | Ain | input | A-channel TTL logic input; a high level requires 2.0 V or more and a low level requires 0.8 V or less. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XBLW |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | Vcc | 22 | V | Absolute maximum rating, Tamb=25°C unless otherwise specified | 4 | ||
| Maximum output current | Iout | 300 | mA | Absolute maximum rating | 4 | ||
| Power dissipation, SOP8 package | PD | 450 | mW | SOP8 package; Tamb=25°C; derate 4.5 mW per °C above 25°C (note *2) | 4 | ||
| Operating ambient temperature | Tamb | -20 | 85 | ℃ | Listed in absolute maximum rating table | 4 | |
| Storage temperature | Tstg | -55 | 125 | ℃ | Absolute maximum rating | 4 | |
| Supply voltage (recommended) | Vcc | 2.8 | 18 | V | Recommended operating conditions | 4 | |
| Output current | Io | 200 | 300 | mA | Vcc=9V, Tamb=25°C (electrical characteristics table) | 5 | |
| Output saturation voltage | VCES | 1 | 1.6 | V | Io=100mA; Vcc=9V, Tamb=25°C | 5 | |
| Input high-level voltage | VIH | 2 | V | Vcc=9V, Tamb=25°C | 5 | ||
| Input low-level voltage | VIL | 0.8 | V | Vcc=9V, Tamb=25°C | 5 | ||
| Standby current | IST | 0.4 | mA | Input A and B both low; Vcc=9V, Tamb=25°C | 5 | ||
| Input high-level current | IIH | 250 | 400 | A | VIH=4.5V; Vcc=9V, Tamb=25°C | 5 | |
| Protection diode surge current capability | 500 | mA | Pulse width 10 ms, duty cycle 10% or less | 5 |
CAD (KiCad official)
- Symbol:
CP6208DTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cp6208dtr-etched.step/cp6208dtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cp6208dtr.step/cp6208dtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XBLW datasheet (9 pp, sha256
a08a7509412c1e6d, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).