Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HAD8542ARMZ

HXY MOSFET · Operational Amplifier · MSOP-8L

HAD8542ARMZ from HXY MOSFET, in a MSOP-8L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier A, which swings rail-to-rail into heavy loads.
2 -IN A input Inverting input of amplifier A, whose common-mode range extends 100mV beyond the supply rails.
3 +IN A input Non-inverting input of amplifier A, whose common-mode range extends 100mV beyond the supply rails.
4 -VS power_in Negative power supply, used with +VS over 2.2 V to 5.5 V (single supply) or ±1.0 V to ±3 V (dual supply), with absolute maximum +VS to -VS of 7 V.
5 +IN B input Non-inverting input of amplifier B, whose common-mode range extends 100mV beyond the supply rails.
6 -IN B input Inverting input of amplifier B, whose common-mode range extends 100mV beyond the supply rails.
7 OUT B output Output of amplifier B, which swings rail-to-rail into heavy loads.
8 +VS power_in Positive power supply, used with -VS over 2.2 V to 5.5 V; bypass with a 0.1μF ceramic capacitor close to the pin.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package MSOP-8L
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS 1 3 mV 2
Offset voltage drift 1 3.5 μV/°C TA= −40 to +85°C 2
Power supply rejection ratio PSRR 80 110 dB VS= 2.2 to 5.5 V, VCM< VS+-2V 2
Power supply rejection ratio PSRR 75 dB TA = −40 to +85°C 2
Input bias current IB 150 pA TA= +70 °C 2
Input bias current IB 200 pA TA= +85 °C 2
Common-mode rejection ratio CMRR 70 83 dB VS= 5.5 V, VCM= −0.1 to 5.6 V 3
Common-mode rejection ratio CMRR 65 dB VCM= 0 to 5.3 V, TA= -40 to +85 °C 3
Common-mode rejection ratio CMRR 65 77 dB VS= 2.2 V, VCM= −0.1 to 2.2 V 3
Common-mode rejection ratio CMRR 60 dB VCM= 0 to 2.2 V, TA= -40 to +85 °C 3
Open-loop voltage gain VOL 90 105 dB RL = 25 kΩ, VO = 0.05 to 3.5 V 3
Open-loop voltage gain VOL 85 dB TA= −40 to +85 °C 3
Open-loop voltage gain VOL 85 100 dB RL = 2 kΩ, VO = 0.15 to 3.5 V 3
Open-loop voltage gain VOL 80 dB TA= −40 to +85 °C 3
High output voltage swing VOH -6 -3 mV RL= 50 kΩ; printed as VS+-6 (typ) and VS+-3 (max), relative to VS+ 3
High output voltage swing VOH -100 -65 mV RL= 2 kΩ; printed as VS+-100 (typ) and VS+-65 (max), relative to VS+ 3
Low output voltage swing VOL 2 4 mV RL= 50 kΩ; printed as VS-+2 (typ) and VS-+4 (max), relative to VS- 3
Low output voltage swing VOL 43 65 mV RL= 2 kΩ; printed as VS-+43 (typ) and VS-+65 (max), relative to VS- 3
Operating supply voltage VS 2.2 5.5 V 3
Quiescent current (per amplifier) IQ 120 μA 3
Quiescent current (per amplifier) IQ 150 μA TA= −40 to +85 ℃ 3
Operating temperature range TA -40 85 ℃ 2
Storage temperature range -65 150 ℃ 2
Junction temperature 160 ℃ 2
Lead temperature (soldering) 260 ℃ Soldering 10 sec 2

CAD (KiCad official)

  • Symbol: HAD8542ARMZ
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8L (KiCad packages3D, STEP)
  • 3D model files: had8542armz-etched.step / had8542armz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); had8542armz.step / had8542armz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (14 pp, sha256 8efced354f84afdd, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF