3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74LS173AN
Texas Instruments · Flip Flops · PDIP-16
SN74LS173AN from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | M | input | Output-control input; when M or N (or both) is high, the outputs are disabled to the high-impedance state without affecting flip-flop sequencing. |
| 2 | N | input | Output-control input; when N or M (or both) is high, the outputs are disabled to the high-impedance state without affecting flip-flop sequencing. |
| 3 | 1Q | tri_state | Register output Q of bit 1 with 3-state totem-pole drive, able to drive highly capacitive or low-impedance bus loads. |
| 4 | 2Q | tri_state | Register output Q of bit 2 with 3-state totem-pole drive, able to drive highly capacitive or low-impedance bus loads. |
| 5 | 3Q | tri_state | Register output Q of bit 3 with 3-state totem-pole drive, able to drive highly capacitive or low-impedance bus loads. |
| 6 | 4Q | tri_state | Register output Q of bit 4 with 3-state totem-pole drive, able to drive highly capacitive or low-impedance bus loads. |
| 7 | CLK | input | Clock input; data is loaded on the positive transition of the buffered clock when both G1 and G2 are low. |
| 8 | GND | power_in | Ground reference for the device; voltages are referenced to the network ground terminal. |
| 9 | G1 | input | Data-enable input; when both G1 and G2 are low, data at the D inputs are loaded into the flip-flops on the next positive clock transition. |
| 10 | G2 | input | Data-enable input; when both G1 and G2 are low, data at the D inputs are loaded into the flip-flops on the next positive clock transition. |
| 11 | 4D | input | Data input to the fourth flip-flop, loaded when both data-enable inputs are low on the next positive clock transition. |
| 12 | 3D | input | Data input to the third flip-flop, loaded when both data-enable inputs are low on the next positive clock transition. |
| 13 | 2D | input | Data input to the second flip-flop, loaded when both data-enable inputs are low on the next positive clock transition. |
| 14 | 1D | input | Data input to the first flip-flop, loaded when both data-enable inputs are low on the next positive clock transition. |
| 15 | CLR | input | Asynchronous clear input; a low level clears the register outputs to L, independent of the clock. |
| 16 | VCC | power_in | Supply voltage; recommended 4.75 V to 5.25 V for SN74LS173A with 5 V nominal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-16 |
| Category | Logic ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.75 | 5 | 5.25 | V | 7 | |
| High-level output current | IOH | -2.6 | mA | 7 | |||
| Low-level output current | IOL | 24 | mA | 7 | |||
| Operating free-air temperature | TA | 0 | 70 | °C | 7 | ||
| Supply voltage | VCC | -0.5 | 7 | V | Voltage values with respect to network ground terminal | 4 | |
| Input voltage (LS173A) | -0.5 | 7 | V | ’LS173A | 4 | ||
| Off-state output voltage | -0.5 | 5.5 | V | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Package thermal impedance, N package | θJA | 78 | °C/W | N package | 4 | ||
| High-level input voltage | VIH | 2 | V | 7 | |||
| Low-level input voltage | VIL | 0.8 | V | 7 | |||
| Input clamp voltage | VIK | -1.5 | V | VCC = MIN, II = -18 mA | 7 | ||
| High-level output voltage | VOH | 2.4 | 3.1 | V | VCC = MIN, VIL = VILmax, VIH = 2 V, IOH = MAX | 7 | |
| Low-level output voltage | VOL | 0.25 | 0.4 | V | VCC = MIN, IOL = 12 mA | 7 | |
| Low-level output voltage | VOL | 0.35 | 0.5 | V | VIL = 0.8 V, IOL = 24 mA | 7 | |
| Off-state (high-impedance state) output current, high | IO(off) | 20 | µA | VCC = MAX, VO = 2.7 V, VIH = 2 V | 7 | ||
| Off-state (high-impedance state) output current, low | IO(off) | -20 | µA | VCC = MAX, VO = 0.4 V, VIH = 2 V | 7 | ||
| Input current at maximum input voltage | II | 0.1 | mA | VCC = MAX, VI = 7 V | 7 | ||
| High-level input current | IIH | 20 | µA | VCC = MAX, VI = 2.7 V | 7 | ||
| Low-level input current | IIL | -0.4 | mA | VCC = MAX, VI = 0.4 V | 7 | ||
| Short-circuit output current | IOS | -30 | -130 | mA | VCC = MAX | 7 | |
| Supply current | ICC | 19 | 24 | mA | VCC = MAX, See Note 4 | 7 | |
| Input clock frequency | fclock | 25 | MHz | 7 | |||
| Pulse duration CLK or CLR | tw | 25 | ns | CLK or CLR | 7 | ||
| Pulse duration data enable | tw | 35 | ns | Data enable (G1, G2) | 7 | ||
| Setup time data | tsu | 17 | ns | Data | 7 | ||
| Setup time CLR inactive state | tsu | 10 | ns | CLR (inactive state) | 7 | ||
| Hold time data enable | th | 0 | ns | Data enable (G1, G2) | 7 | ||
| Hold time data | th | 3 | ns | Data | 7 | ||
| Propagation delay high-to-low from clear input | tPHL | 26 | 35 | ns | CL = 45 pF, RL = 667 Ω, VCC = 5 V, TA = 25°C | 8 | |
| Propagation delay low-to-high from clock input | tPLH | 17 | 25 | ns | CL = 45 pF, RL = 667 Ω, VCC = 5 V, TA = 25°C | 8 | |
| Propagation delay high-to-low from clock input | tPHL | 22 | 30 | ns | CL = 45 pF, RL = 667 Ω, VCC = 5 V, TA = 25°C | 8 |
CAD (KiCad official)
- Symbol:
SN74LS173AN - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files:
sn74ls173an-etched.step/sn74ls173an-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ls173an.step/sn74ls173an.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
03904c6068c2e022, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).