3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX4465EXK+T
Maxim Integrated · Audio Power OpAmps · SC-70-5
MAX4465EXK+T from Maxim Integrated, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Noninverting amplifier input. |
| 2 | GND | power_in | Ground. |
| 3 | IN- | input | Inverting amplifier input. |
| 4 | OUT | output | Amplifier output, which swings within 16mV of the supply rails with a 10kΩ load. |
| 5 | VCC | power_in | Positive supply, +2.4V to +5.5V; bypass with a 0.1µF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SC-70-5 |
| Category | Amplifiers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 2.4 | 5.5 | V | Inferred from PSRR test | 2 | |
| Supply Current (per amplifier) | ICC | 24 | 48 | µA | TA = +25°C | 2 | |
| Supply Current (per amplifier) | ICC | 60 | µA | TA = TMIN to TMAX | 2 | ||
| Input Offset Voltage | VOS | -5 | 1 | 5 | mV | 2 | |
| Input Bias Current | IB | -100 | 2.5 | 100 | nA | VCM = -0.1V | 2 |
| Input Offset Current Range | IOS | -15 | 1 | 15 | nA | VCM = -0.1V | 2 |
| Input Common-Mode Range | VCM | -0.1 | V | Inferred from CMRR test | 2 | ||
| Common-Mode Rejection Ratio | CMRR | 80 | 126 | dB | -0.1V ≤ VCM ≤ VCC - 1V | 2 | |
| Common-Mode Rejection Ratio | CMRR | 80 | 112 | dB | 2.4V ≤ VCC ≤ 5.5V | 2 | |
| Power-Supply Rejection Ratio | PSRR | 75 | dB | MAX4465/MAX4467/MAX4469, f = 3.4kHz | 2 | ||
| Open-Loop Gain | AVOL | 125 | dB | RL= 100kΩ to VCC/2, 0.05V ≤ VOUT ≤ VCC - 0.05V | 2 | ||
| Open-Loop Gain | AVOL | 80 | 95 | dB | RL= 10kΩ to VCC/2, 0.1V ≤ VOUT ≤ VCC - 0.1V | 2 | |
| Output Voltage Swing High | VOH | 10 | mV | RL = 100kΩ | 2 | ||
| Output Voltage Swing High | VOH | 16 | 50 | mV | RL = 10kΩ | 2 | |
| Output Voltage Swing Low | VOL | 14 | 50 | mV | RL = 10kΩ | 2 | |
| Output Short-Circuit Current | 15 | mA | To either supply rail | 2 | |||
| Gain Bandwidth Product | GBWP | 200 | kHz | MAX4465/MAX4467/MAX4469 | 2 | ||
| Phase Margin | ØM | 70 | degrees | RL= 100kΩ | 3 | ||
| Gain Margin | 20 | dB | RL= 100kΩ | 3 | |||
| Slew Rate | SR | 45 | mV/µs | MAX4465/MAX4467/MAX4469, AV = +1, output step = 4V | 3 | ||
| Input Noise Voltage Density | en | 80 | nV/√Hz | f = 1kHz | 3 | ||
| Total Harmonic Distortion | THD | 0.02 | % | f = 1kHz, RL = 10kΩ, VOUT = 2Vp-p, MAX4465/MAX4467/MAX4469, AV = +1 | 3 | ||
| Capacitive Load Stability | CLOAD | 100 | pF | MAX4465/MAX4467/MAX4469, AV = +1 | 3 | ||
| Supply Voltage to GND (absolute maximum) | VCC | 6 | V | VCC to GND | 2 | ||
| All Other Pins to GND | -0.3 | V | Relative to GND; upper limit VCC + 0.3V | 2 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Storage Temperature Range | TSTORE | -65 | 150 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10s | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | Reflow | 2 | |||
| Continuous Power Dissipation | PD | 200 | mW | TA = +70°C, 5-pin SC70; derate 2.5mW/°C above +70°C | 2 |
CAD (KiCad official)
- Symbol:
MAX4465EXK+T - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
max4465exk-t-etched.step/max4465exk-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max4465exk-t.step/max4465exk-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (12 pp, sha256
85d9c9750210ca77, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).