3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownREAC1251GSP#GC0
RENESAS · Operational Amplifier · TSSOP-8
REAC1251GSP#GC0 from RENESAS, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Amplifier 1 output, swings from V- (GND) to V+ - 1.6 V with RL = 2 kΩ; output short to V+ can cause destruction. |
| 2 | II1 | input | Amplifier 1 inverting input, common-mode range 0 V to V+ - 1.5 V and differential input limited to ±10 V. |
| 3 | IN1 | input | Amplifier 1 non-inverting input, common-mode range 0 V to V+ - 1.5 V and differential input limited to ±10 V. |
| 4 | V- | power_in | Negative supply or ground (GND) for single-supply operation, with split supply operation of ±1.5 V to ±15 V allowed. |
| 5 | IN2 | input | Amplifier 2 non-inverting input, common-mode range 0 V to V+ - 1.5 V and differential input limited to ±10 V. |
| 6 | II2 | input | Amplifier 2 inverting input, common-mode range 0 V to V+ - 1.5 V and differential input limited to ±10 V. |
| 7 | OUT2 | output | Amplifier 2 output, swings from V- (GND) to V+ - 1.6 V with RL = 2 kΩ; output short to V+ can cause destruction. |
| 8 | V+ | power_in | Positive supply, +3 V to +30 V with V- = GND (absolute maximum 32 V between V+ and V-). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | V+ - V- | -0.3 | 32 | V | 2 | ||
| Differential Input Voltage | VID | -10 | 10 | V | 2 | ||
| Input Voltage | VI | -0.3 | 32 | V | Referenced to V- (printed V- -0.3 to V- +32) | 2 | |
| Output applied Voltage | VO | -0.3 | 0.3 | V | Min referenced to V-, max referenced to V+ (Note 3) | 2 | |
| Total Power Dissipation | PT | 440 | mW | Glass epoxy substrate 100 mm x 100 mm, 1 mm (Note 4) | 2 | ||
| Operating Ambient Temperature | TA | -40 | 125 | ˚C | 2 | ||
| Storage Temperature | Tstg | -55 | 150 | ˚C | 2 | ||
| Power Supply Voltage (Split) | V± | 1.5 | 15 | V | 3 | ||
| Power Supply Voltage (V- = GND) | V+ | 3 | 30 | V | V- = GND | 3 | |
| Input Offset Voltage | VIO | -1 | 0.2 | 1 | mV | VIN=1/2Vcc, RS≤50Ω | 3 |
| Input Offset Current | IIO | -50 | 5 | 50 | nA | 3 | |
| Input Bias Current | IB | 14 | 60 | nA | 3 | ||
| Large Signal Voltage Gain | AV | 25000 | 100000 | RL≥2kΩ(Connect to GND) | 3 | ||
| Supply Current | ICC | 0.7 | 1.4 | mA | RL=∞, IO=0A | 3 | |
| Common Mode Rejection Ratio | CMR | 65 | 85 | dB | 3 | ||
| Supply Voltage Rejection Ratio | SVR | 65 | 100 | dB | 3 | ||
| Common Mode Input Voltage Range | VICM | 0 | V | 3 | |||
| Output Voltage Swing | Vo | 0 | V | RL=2kΩ(Connect to GND) | 3 | ||
| Output Current (Source) | IO SOURCE | 20 | 40 | mA | VIN+ =+1V, VIN- = 0V | 3 | |
| Output Current (Sink) | IO SINK1 | 10 | 20 | mA | VIN- =+1V, VIN+ = 0V | 3 | |
| Output Current (Sink) | IO SINK2 | 12 | 50 | μA | VIN- =+1V, VIN+ = 0V , Vo = 200mV | 3 | |
| Junction ambient thermal resistance | Rth(J-A) | 183 | ˚C/W | Glass epoxy substrate per Note 4; printed for REAC1251JSP | 2 |
CAD (KiCad official)
- Symbol:
REAC1251GSP#GC0 - Footprint:
Package_SO:TSSOP-8_4.4x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
reac1251gsp-gc0-etched.step/reac1251gsp-gc0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);reac1251gsp-gc0.step/reac1251gsp-gc0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (11 pp, sha256
85d446870df54eb1, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).