3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPCM5140QRGERQ1
Texas Instruments · IC · VQFN-24(4x4)
PCM5140QRGERQ1 from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVDD | power_in | Analog supply, 1.8 V or 3.3 V nominal; 3.0 V to 3.6 V for 3.3 V operation and 1.7 V to 1.9 V for 1.8 V operation. |
| 2 | AREG | power_out | Analog on-chip regulator output (1.8 V nominal) for the analog supply, or an external 1.8 V analog power input when the internal regulator is not used. |
| 3 | VREF | power_in | Analog reference voltage filter output, to be filtered with a minimum 1 µF capacitor to AVSS. |
| 4 | AVSS | power_in | Analog ground; short this pin directly to the board ground plane. |
| 5 | MICBIAS | power_out | Programmable microphone bias output. |
| 6 | IN1P_GPI1 | passive | Analog input 1P, or general-purpose digital input 1 when the analog path is not used (for example PDM data or PLL input clock source); analog inputs are referenced to AVDD. |
| 7 | IN1M_GPO1 | passive | Analog input 1M, or general-purpose digital output 1 when the analog path is not used (for example PDM clock, interrupt output); analog inputs are referenced to AVDD. |
| 8 | IN2P_GPI2 | passive | Analog input 2P, or general-purpose digital input 2 when the analog path is not used (for example PDM data or PLL input clock source); analog inputs are referenced to AVDD. |
| 9 | IN2M_GPO2 | passive | Analog input 2M, or general-purpose digital output 2 when the analog path is not used (for example PDM clock, interrupt output); analog inputs are referenced to AVDD. |
| 10 | IN3P_GPI3 | passive | Analog input 3P, or general-purpose digital input 3 when the analog path is not used (for example PDM data or PLL input clock source); analog inputs are referenced to AVDD. |
| 11 | IN3M_GPO3 | passive | Analog input 3M, or general-purpose digital output 3 when the analog path is not used (for example PDM clock, interrupt output); analog inputs are referenced to AVDD. |
| 12 | IN4P_GPI4 | passive | Analog input 4P, or general-purpose digital input 4 when the analog path is not used (for example PDM data or PLL input clock source); analog inputs are referenced to AVDD. |
| 13 | IN4M_GPO4 | passive | Analog input 4M, or general-purpose digital output 4 when the analog path is not used (for example PDM clock, interrupt output); analog inputs are referenced to AVDD. |
| 14 | SHDNZ | input | Device hardware shutdown and reset, active low. |
| 15 | ADDR1_MISO | bidirectional | I2C target address A1 pin in I2C operation, or SPI target output in SPI operation. |
| 16 | ADDR0_SCLK | input | I2C target address A0 pin in I2C operation, or SPI serial bit clock input in SPI operation. |
| 17 | SCL_MOSI | input | I2C control bus clock in I2C operation, or SPI target input in SPI operation. |
| 18 | SDA_SSZ | bidirectional | I2C control bus data in I2C operation, or SPI target-select in SPI operation. |
| 19 | IOVDD | power_in | Digital I/O supply, 1.8 V or 3.3 V nominal; 3.0 V to 3.6 V for 3.3 V operation and 1.65 V to 1.95 V for 1.8 V operation. |
| 20 | GPIO1 | bidirectional | General-purpose digital input/output 1, referenced to IOVDD, with multipurpose functions such as digital microphone clock or data, PLL input clock source, and interrupt. |
| 21 | SDOUT | output | Audio serial data interface bus output. |
| 22 | BCLK | bidirectional | Audio serial data interface bus bit clock. |
| 23 | FSYNC | bidirectional | Audio serial data interface bus frame synchronization signal. |
| 24 | DREG | power_out | Digital regulator output for the digital core supply (1.5 V nominal). |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24(4x4) |
| Category | |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage AVDD to AVSS | -0.3 | 3.9 | V | Over operating ambient temperature range | 6 | ||
| Supply voltage AREG to AVSS | -0.3 | 2 | V | Over operating ambient temperature range | 6 | ||
| Supply voltage IOVDD to VSS (thermal pad) | -0.3 | 3.9 | V | Over operating ambient temperature range | 6 | ||
| Ground voltage difference AVSS to VSS (thermal pad) | -0.3 | 0.3 | V | Over operating ambient temperature range | 6 | ||
| Analog input pins voltage to AVSS | -0.3 | V | Over operating ambient temperature range | 6 | |||
| Digital input except INxP_GPIx pins voltage to VSS (thermal pad) | -0.3 | V | Over operating ambient temperature range | 6 | |||
| Digital input INxP_GPIx pins voltage to VSS (thermal pad) | -0.3 | V | Over operating ambient temperature range | 6 | |||
| Operating ambient temperature | TA | -40 | 125 | °C | 6 | ||
| Junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Analog supply voltage AVDD to AVSS (AVDD 3.3-V operation) | AVDD | 3 | 3.3 | 3.6 | V | AREG is generated using onchip regulator | 6 |
| Analog supply voltage AVDD and AREG to AVSS (AVDD 1.8-V operation) | AVDD, AREG | 1.7 | 1.8 | 1.9 | V | AREG internal regulator is shutdown | 6 |
| IO supply voltage to VSS (thermal pad) (IOVDD 3.3-V operation) | IOVDD | 3 | 3.3 | 3.6 | V | 6 | |
| IO supply voltage to VSS (thermal pad) (IOVDD 1.8-V operation) | IOVDD | 1.65 | 1.8 | 1.95 | V | 6 | |
| Analog input pins voltage to AVSS | 0 | V | 6 | ||||
| Digital input except INxP_GPIx pins voltage to VSS (thermal pad) | 0 | V | 6 | ||||
| Digital input INxP_GPIx pins voltage to VSS (thermal pad) | 0 | V | 6 | ||||
| Operating ambient temperature | TA | -40 | 125 | °C | 6 | ||
| GPIOx or GPIx clock frequency | 36.864 | MHz | Used as MCLK input | 6 | |||
| SCL and SDA bus capacitance for I2C interface (standard-mode and fast-mode) | Cb | 400 | pF | 6 | |||
| SCL and SDA bus capacitance for I2C interface (fast-mode plus) | Cb | 550 | pF | 6 | |||
| Digital output load capacitance | CL | 20 | 50 | pF | 6 | ||
| Channel gain range | 0 | 42 | dB | Programmable range with 1-dB steps | 7 | ||
| Low-level digital input logic voltage threshold (INxP_GPIx, AVDD 1.8-V operation) | VIL(GPIx) | -0.3 | V | All INxP_GPIx digital pins, AVDD 1.8-V operation | 10 | ||
| Low-level digital input logic voltage threshold (INxP_GPIx, AVDD 3.3-V operation) | VIL(GPIx) | -0.3 | 0.8 | V | All INxP_GPIx digital pins, AVDD 3.3-V operation | 10 | |
| High-level digital input logic voltage threshold (INxP_GPIx, AVDD 3.3-V operation) | VIH(GPIx) | 2 | V | All INxP_GPIx digital pins, AVDD 3.3-V operation | 10 | ||
| High-level digital input logic voltage threshold (IOVDD 3.3-V operation) | VIH | 2 | V | All digital pins except INxP_GPIx, SDA and SCL, IOVDD 3.3-V operation | 10 | ||
| Low-level digital input logic voltage threshold (SDA and SCL) | VIL(I2C) | -0.5 | V | SDA and SCL | 10 | ||
| Input logic-high leakage for digital inputs | IIH | -5 | 0.1 | 5 | µA | All digital pins except INxP_GPIx pins, input = IOVDD | 10 |
| Input logic-low leakage for digital inputs | IIL | -5 | 0.1 | 5 | µA | All digital pins except INxP_GPIx pins, input = 0 V | 10 |
| Input logic-high leakage for digital inputs (INxP_GPIx) | IIH(GPIx) | -5 | 0.1 | 5 | µA | All INxP_GPIx digital pins, input = AVDD | 10 |
| Input logic-low leakage for digital inputs (INxP_GPIx) | IIL(GPIx) | -5 | 0.1 | 5 | µA | All INxP_GPIx digital pins, input = 0 V | 10 |
| SCL clock frequency (standard-mode) | fSCL | 0 | 100 | kHz | Standard-mode | 12 | |
| Data hold time (standard-mode) | tHD;DAT | 0 | 3.45 | μs | Standard-mode | 12 | |
| SCL clock frequency (fast-mode) | fSCL | 0 | 400 | kHz | Fast-mode | 12 | |
| Data hold time (fast-mode) | tHD;DAT | 0 | 0.9 | μs | Fast-mode | 12 | |
| SDA and SCL rise time (fast-mode) | tr | 20 | 300 | ns | Fast-mode | 12 | |
| SDA and SCL fall time (fast-mode) | tf | 300 | ns | Fast-mode | 12 | ||
| SCL clock frequency (fast-mode plus) | fSCL | 0 | 1000 | kHz | Fast-mode plus | 12 | |
| SDA and SCL fall time (fast-mode plus) | tf | 120 | ns | Fast-mode plus | 12 | ||
| SCL to SDA delay (standard-mode) | td(SDA) | 250 | 1250 | ns | Standard-mode | 13 | |
| SCL to SDA delay (fast-mode) | td(SDA) | 250 | 850 | ns | Fast-mode | 13 | |
| PDMCLK clock frequency | f(PDMCLK) | 0.768 | 6.144 | MHz | 14 | ||
| Junction-to-ambient thermal resistance | RθJA | 45.6 | °C/W | RGE (VQFN) 24 pins | 7 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 30 | °C/W | RGE (VQFN) 24 pins | 7 | ||
| Junction-to-board thermal resistance | RθJB | 22.5 | °C/W | RGE (VQFN) 24 pins | 7 | ||
| Junction-to-top characterization parameter | ψJT | 0.8 | °C/W | RGE (VQFN) 24 pins | 7 | ||
| Junction-to-board characterization parameter | ψJB | 22.4 | °C/W | RGE (VQFN) 24 pins | 7 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 15 | °C/W | RGE (VQFN) 24 pins | 7 |
CAD (KiCad official)
- Symbol:
PCM5140QRGERQ1 - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
pcm5140qrgerq1-etched.step/pcm5140qrgerq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcm5140qrgerq1.step/pcm5140qrgerq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (129 pp, sha256
8443f69f41139cf4, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).