Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LF353P

Texas Instruments · FET Input Amplifiers · DIP-8

LF353P from Texas Instruments, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of operational amplifier 1.
2 1IN- input Inverting input of operational amplifier 1.
3 1IN+ input Noninverting input of operational amplifier 1.
4 VCC- power_in Negative supply voltage for the device, operating range -3.5 V to -18 V per recommended conditions.
5 2IN+ input Noninverting input of operational amplifier 2.
6 2IN- input Inverting input of operational amplifier 2.
7 2OUT output Output of operational amplifier 2.
8 VCC+ power_in Positive supply voltage for the device, operating range 3.5 V to 18 V per recommended conditions.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package DIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (positive) VCC+ 18 V 4
Supply voltage (negative) VCC– -18 V 4
Differential input voltage VID -30 30 V 4
Input voltage VI -15 15 V 4
Continuous total power dissipation 500 mW 4
Lead temperature 260 °C 1.6 mm (1/16 inch) from case for 10 s 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage (positive) VCC+ 3.5 18 V Over operating free-air temperature range 4
Supply voltage (negative) VCC– -18 -3.5 V Over operating free-air temperature range 4
Operating temperature TA 0 70 °C 4
Input offset voltage VIO 5 10 mV VIC = 0, RS = 10 kΩ, TA = 25°C 5
Input offset voltage VIO 13 mV VIC = 0, RS = 10 kΩ, full range (0°C to 70°C) 5
Input offset current IIO 25 100 pA VIC = 0, TA = 25°C 5
Input offset current IIO 4 nA VIC = 0, TA = 70°C 5
Input bias current IIB 50 200 pA VIC = 0, TA = 25°C 5
Input bias current IIB 8 nA VIC = 0, TA = 70°C 5
Common-mode input voltage range, lower limit of range VICR -11 -12 V 5
Common-mode input voltage range, upper limit of range VICR 11 15 V 5
Maximum peak output voltage swing VOM 12 13.5 V RL = 10 kΩ; printed as ±12 and ±13.5 5
Large-signal differential voltage amplification AVD 25 100 V/mV VO = ±10 V, RL = 2 kΩ, TA = 25°C 5
Large-signal differential voltage amplification AVD 15 V/mV VO = ±10 V, RL = 2 kΩ, full range (0°C to 70°C) 5
Common-mode rejection ratio CMRR 70 100 dB RS ≤ 10 kΩ 5
Supply-voltage rejection ratio kSVR 70 100 dB See (3) 5
Supply current ICC 3.6 6.5 mA 5
Crosstalk attenuation VO1/VO2 120 dB f = 1 kHz 5
Slew rate SR 8 13 V/µs 5
Junction-to-ambient thermal resistance (PDIP, P package) RθJA 55.1 °C/W 4
Junction-to-case (top) thermal resistance (PDIP, P package) RθJC(top) 45 °C/W 4
Junction-to-board thermal resistance (PDIP, P package) RθJB 32.2 °C/W 4

CAD (KiCad official)

  • Symbol: LF353P
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: lf353p-etched.step / lf353p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lf353p.step / lf353p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (21 pp, sha256 60f31c89a860fa37, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF